3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
•
•
•
•
•
MP2 Series
6.50 Amps per contact
End-to-end stackable
Press or heat stake peg (solder tail)
Futurebus+
®
compatible
See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified:
February 14,
2017
TS-1125-E
Sheet 1 of 4
Physical
Insulation:
Material: High Temperature LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Tails: See Ordering Information
Electrical
Current Rating:
Power: 6.50 A per power socket contact at 70°C
Insulation Resistance:
10
3
MΩ
Withstanding Voltage:
1,500 V
AC
for 60 seconds
Environmental
Temperature Rating:
-55° C to 125° C
Process Temperature Rating:
260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
11.95
.470
21.0
.83
MP2 Series
12.45
.490
11.80
.465
9.30
.366
"A" TAIL LENGTH
3.00
.118
POSITION 2 POSITION 1
13.50
.531
2.00
.079
TYP.
6.00
.236
2.00
.079
5X
"B"
10.00
.394
9.50
.374
4 ROW PRODUCT
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
REPRESENTATIVE
mm
(Inch)
Tolerance Unless Noted
ROW
12.45
.490
11.30
.445
23.0
.91
mm
0
±3
0.0
±0.3
0.00
±0.13
( ) Dimensions used for
Reference Only
D
C
B
A
E
13.80
.543
5 ROW PRODUCT
8.00
.315
Note:
1. Refer to IEC 61076-4-104 Futurebus+
®
global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2-SPXX-X1XX- XXXXX
SP = Power Socket
Contact Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Tail Length
(See Table 2)
Plating Options:
(See Table 3)
Termination Style
P = Press-Fit
M = Solder Tail (Press Peg)
TS-1125-E
Sheet 2 of 4
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
MP2 Series
Table 1
Pin Count
08
10
No of Rows
4
5
Table 2 - Tail & Post Lengths
Contact-to-PC Board Tail
Termination Option No.
Solder
S1
S2
M1
M2
*Compliant-Pin Tail
P1
Press-Fit*
2.72 [0.107]
3.53 [0.139]
2.72 [0.107]
3.53 [0.139]
5.20 [0.205]
6.00 [0.256]
3.75 [0.148]
3.75 [0.148]
Dim. “A”
Dim. “B”
Table 3 - Plating
Plating Suffix
KR
Press-Fit Tails*
RIA E1 & C1 apply
Solder Tails
RIA E1 & C1 apply
Plating Composition
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR
*Compliant-Pin Tail
RIA E1 & C1 apply
RIA E1 & C1 apply
TS-1125-E
Sheet 3 of 4
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
6.00
.236
4.00
.157
1.00
.039
4.00
.157
2.05
+.05
-.00
+.002
-.000
MP2 Series
2.00
.079
2.00
.079
TYP.
3X
A1
"B"
Ø
0.10
.081
UNPLATED THRU HOLE
UNPLATED THROUGH-HOLE
Ø
Ø
“D” PLATED THROUGH-HOLE
1.50
.059
+.10
-.00
+.004
-.000
Ø
0.10
2.00
.079
4X
8.00
.315
Ø
0.10
3.00
.118
UNPLATED THROUGH-HOLE
Recommended 4 Row PCB Hole
Mounting Pattern
Recommended 5 Row PCB Hole
Mounting Pattern
Table 4 - HOLE PLATING FINISHES
HOLE
Finished Dia.
mm [in]
0.700-0.800
[.0276-.0315]
Cu Thickness
mm [in]
0.025-0.045
[0.001-0.002]
Immersion Matte
Sn Thickness
microns [μ”]
0.5 - 2.5
[20 - 100]
Electrolitic Au
Thickness
microns [μ”]
0.1 - 0.5
[4 - 20]
OSP ENTEK
Thickness
microns [μ”]
0.2 - 0.5
[8 - 20]
Drilled Hole Dia.
mm [in]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
“D”
TS-1125-E
Sheet 4 of 4
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory: For regulatory information about this product, contact your 3M representative.
Technical Information: The technical information, recommendations and other statements contained in this document are based upon
tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of
a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is
solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method
of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging
or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.
3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY
IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the
3M Product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or
refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
3
3M Electronics Materials Solutions Division
6801 River Place Blvd.
3M and MetPak are
Austin, TX 78726-9000
trademarks of 3M Company.
All
other trademarks belong to their
U.S.A.
respective owners.
Please
1-800-225-5373
recycle. Printed in USA. © 3M
2017. All rights reserved.
www.3Mconnectors.com
RIA-2217B-E
京公网安备 11010802033920号
EEWORLD
