Hall Effect Sensors
LED Flange Mount > 55110
55110 Miniature Flange Mounting Proximity Sensor
Description
The 55110 is a flange mounting hall effect sensor with integral LED for visual
indication of operation, 34.00mm (1.339”) x 14.00m (0.551”) x 10.00mm (0.394”)
with a choice of digital outputs. It is available as three-wire (voltage output)
version and it’s case design enables screw or adhesive mounting. It is capable of
switching up to 28Vdc and 20mA. It works best with the operating magnet with
the Littelfuse part number H-58.
Features
• Magnetically operated position
sensor
• Integral LED
• Medium or high sensitivities
• Three-wire (voltage output)
• Reverse/Over voltage protection
• Built in temperature compensation
Dimensions
Dimensions in mm (inch)
10.00
(.394)
14.00
(.551)
Encapsulant excluded
Benefits
300
(11.81)
34.00 22.00 12.00
(1.339) (.427) (.427)
8.75
(.268)
6.35 NOM.
(.250)
• High switching speed up to 10kHz
• Long life - up to 1 billion operations
• Visual indication of operation
• Unaffected by harsh environments
• Operates in static or dynamic
magnetic field
• Customer selection of cable length
and connector type
Centre of Sensitivity
15.00
(.826)
Integral LED
3.50x6.50 TYP
.
Slot (.138x.256)
Applications
• Position and limit sensing
• Magnetic encoders
4.00
(.157)
General Tol.: ±0.25 (.010)
Block Diagram
Rpu
VDD
Pin 1
(Red)
Cn
GND
Pin 2
(Black)
Hall
Plate
Switch
Comparator
Clock
Output
OUT
Pin 3
(Blue)
Note:
1. Add capacitor Cn as shown, close for the sensors for transient suppression if required.
© 2015 Littelfuse
Revised: 11/02/15
Specifications are subject to change without notice.
littelfuse.com
Hall Effect Sensors
LED Flange Mount > 55110
55110 Miniature Flange Mounting Proximity Sensor
Electrical Ratings
Hall Type
Digital Switch
Three-Wire
(Voltage Output)
Absolute Ratings
Operate
Overvoltage Protection
Vdc
Vdc
Vdc - max.
Vdc - min.
Vdc - max.
-15 to +28
+3.8 to +24
32
Vdd-2 @ 0.1mA
(sinking output with internal pull-up)
0.4 @ 10mA
Supply Voltage
1
Output High Voltage
Output Low Voltage
Output Current
(continuously on)
Switching Speed
Temperature
Note:
1. As long as Tj (Junction Temperature) max. Is not exceeded.
mA - max.
10
Khz - max.
Operating
°C
10
-40 to +85
Hall Options
Select Option
3M
3H
Hall Type
3 Wire Switch
3 Wire Switch
Sensitivity Gauss
(typ.)
130
59
Activate - D
mm (inch)
12.5 (.492)
18.0 (709)
D
N
S
Note: Active distances are approximate using NEFEB Magnet 21 x 7 x 4.7 (.827l x .276W x .185H) LITTELFUSE P/N H-58-MAGNET.
© 2015 Littelfuse
Revised: 11/02/15
Specifications are subject to change without notice.
littelfuse.com
LED Flange Mount > 55110
Hall Effect Sensors
55110 Miniature Flange Mounting Proximity Sensor
Cable Length Specification
Cable Type: 24AWG 7/32/PVC 105°C Double Insulated
Select Option
Cable Length
mm (inch)
Part Numbering System
55110 - XX - XX - X
02
300 (11.81)
Series
Termination Specification
Termination Options
Select
Option
A
F
E
Description
(Two-wire versions illustrated)
Tinned leads (6.4±0.76)mm
Untinned leads (6.4±0.76)mm
JST type XHP 2.5mm pitch
Hall Option
3M or 3H
Cable Length
02
Termination
A, F or E
,
Packaging
Packaging Option
Bulk
Packaging Specification
Bulk
Quantity
500
Quantity & Packaging Code
N/A
Taping Width
N/A
© 2015 Littelfuse
Revised: 11/02/15
Specifications are subject to change without notice.
littelfuse.com
京公网安备 11010802033920号
EEWORLD
