1. Hardware modification:2. Software modification:in order to disable the built-in DC/DC, write this in your ccfg.c:#define SET_CCFG_MODE_CONF_DCDC_RECHARGE 0x1 // Do not use the DC/DC during recharge...
例如mp_obj_t mp_vfs_mount(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args);
How come this becomes uos.mount(bdev, "/") in micropython? Where can I see the mapping process of n_args, *pos_args...
The watchdog is set to prevent the program from running away, but since the watchdog is similar to a timer, it can be used as a timer.
Example Code: Blink an LED with the Watchdog Timer
#include msp43...
[i=s]This post was last edited by Feihong Haojie on 2019-9-9 12:11[/i]Signal generators are often used as input signals of signal chains in analog circuit debugging. The actual performance of the circ...
No matter how I reinstall the driver or turn off the digital signature, it still works. The board is msp430f5529 and the system is win7-64. I hope someone can help me solve this problem, or send me a ...
Apple started to support BLE 4.0 after IOS 6. iPhone 4s, iPod 5, iPad 3 and other later models began to embed BLE 4.0 hardware. Therefore, before development, please make sure that your development en...