L15-30P, 6 ft. Cords, (Vertical PDU also required,
Sold separately)
MODEL NUMBER:
PDU330AT6L1530
Highlights
Requires Tripp Lite 0U outlet
accessory (sold separately)
3-phase L15-30P input and
single-phase 208V output
Automatic transfer switching
within 1–6 ms
Ethernet network interface for
remote access
Digital LED display for real-time
status monitoring
Patented ATS technology
Package Includes
PDU330AT6L1530 8.6kW 208V
3-Phase Monitored/ATS PDU
Rack installation brackets
Configuration cable
Owner’s manual
Description
The PDU330AT6L1530 8.6kW 208V 3-Phase Monitored/ATS PDU provides remote power monitoring and enables redundant power for network devices with
non-redundant power supply configurations. Working in tandem with a required 0U vertical outlet accessory (sold separately; choose from
PDU3V20D354,
PDU3V20D354A
or
PDU3V20D354B),
the 1U PDU330AT6L1530 is ideal for data centers and server rooms. Tripp Lite’s breakthrough 3-phase rack ATS (U.S.
Patent 9,467,006) provides rapid coordination of unsynchronized phases without dropping loads and operates with the high efficiency and reliability required for
data center applications.
Dual 6-foot input cords with L15-30P plugs connect to separate primary and secondary 3-phase power sources. The PDU constantly evaluates the power
quality of both input sources. Dynamic solid-state (TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 1–6
milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption.
Built-in Ethernet network interface allows remote access to the PDU for power monitoring, configuration, control and notifications via web browser, SSH, telnet
or SNMP. Provides real-time load/current data with billing-grade accuracy (+/- 1 percent). Tiered access privileges allow both an administrator and a guest to
log in. Automated alerts help prevent accidental overloads, power loss and downtime. Digital LED display indicates power availability, voltage, source A/B input
status, output load and power factor, as well as temperature and humidity conditions with the optional
ENVIROSENSE
module (sold separately).
Features
Primary and Secondary Inputs for Power Redundancy
Provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations
Dual 6 ft. input cords with L15-30P plugs connect to separate primary and secondary 3-phase power sources
Automatic Transfer Switching
Dynamic solid-state (TRIAC) automatic transfer switching
Patented ATS technology provides rapid coordination of unsynchronized phases without dropping loads
Switches to secondary power source if primary source fails or becomes unstable
1/4
1–6 ms transfer time ensures uninterrupted operation of connected equipment
Built-in processor monitors both sources and prevents switching if secondary source is unavailable or of lower quality than primary source
Multifunction Digital LED Display
Reports source A and source B input power status and other information, including power availability, line voltage, frequency, amps, kilowatts and power
factor
Advanced Network Monitoring
Built-in Ethernet network interface allows full remote access for power monitoring, configuration, control and notifications via web browser, SSH, telnet or
SNMP
Real-time load/current data with billing-grade accuracy (+/- 1 percent)
Tiered access privileges allow both an administrator and a guest to log in
Automated alerts help prevent accidental overloads, power loss and downtime
Supports centralized management through NMS or DCIM platform
Optional
ENVIROSENSE
module (sold separately) monitors temperature and humidity
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
京公网安备 11010802033920号
EEWORLD
