Not for New Design
Type 735P
Vishay Sprague
Film Capacitors
High Current, Wrap-and-Fill, Metallized Polypropylene
FEATURES
•
Wire or lug terminals
•
High stability
•
High ripple to 30 amperes
•
Low inductance
•
Low ESR
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55 °C to + 105 °C
Capacitance Range:
1.0 µF to 30.0 µF
Capacitance Tolerance:
± 10 %, ± 5 %
DC Voltage Rating:
100 WVDC to 400 WVDC
Equivalent Series Resistance:
20 kHz to 100 kHz
Dissipation Factor:
0.1 % maximum
Measured at 1000 Hz at + 25 °C
Δ
V
/Δ
T
:
10 V/millisecond maximum
Voltage Test:
200 % of rated voltage for 2 minutes
Insulation Resistance:
Measured at 100 WVDC after a
2 minute charge.
At + 25 °C: 200 000 Megohm - Microfarads,
or 400 000 Megohm minimum
Vibration Test (Condition B):
No mechanical damage,
short, open or intermittent circuits.
DC Life Test:
140 % of rated voltage for 1000 hours
at + 105 °C. No visible damage. No open or short circuits.
Maximum
Δ
CAP ± 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.10 %
Humidity Test:
95 % relative humidity at + 40 °C for 250
hours. No visible damage.
Maximum
Δ
CAP ± 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
PHYSICAL CHARACTERISTICS
Pull Test:
Wire Leads:
- 5 pounds (2.3 kilograms) for one minute. No
physical damage.
Terminal Lugs:
- 10 pounds (4.5. kilograms) for one minute.
No physical damage.
Lead Bend:
After three complete consecutive bends, no
damage.
Marking:
Sprague
®
trademark, type or part number,
capacitance and voltage.
DIMENSIONS
in inches [millimeters]
Terminal Style L
1.750
[44.45]
Min.
L
±
0.062 [1.57]
1.750
[44.45]
Min.
D
Max.
Tinned Solid Copper Wire*
D Max.< 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter.
D Max.
≥
0.700 [17.78], No. 18 AWG wire 0.040 [1.016] nominal diameter.
Terminal Style H
Tinned Solid Copper Lug
L
1
±
0.062 [1.57]
L
2
±
0.062 [1.57]
0.360
±
0.005
[9.14
±
0.13]
L
±
0.062 [1.57]
0.156
±
0.005 Dia.
[3.96
±
0.13]
D
Max.
0.312 [7.9] Min.
0.032
±0.002
[0.81
±0.05]
L
1
= L + 0.766 [19.46]
L
2
= L + 0.437 [11.10]
* Leads to be within ± 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge (Terminal Style L only).
Document Number: 42031
Revision: 07-Feb-07
For technical questions, contact spresale@vishay.com
www.vishay.com
25
Not for New Design
Type 735P
Vishay Sprague
Film Capacitors
High Current, Wrap-and-Fill,
Metallized Polypropylene
MAXIMUM RIPPLE CURRENT
ESR LIMIT
(Amps rms) at 20 kHz - 100 kHz
(Milliohm)
Case Temperature at
20 kHz -
CASE SIZE
100 kHz
D
L
+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C +
85
°C
Terminal Style L - Units with Wire Leads
100 WVDC
0.531 [13.49] 0.750 [19.05]
15.0
9.2
8.5
7.8
7.0
6.0
4.9
4.5
0.596 [15.14] 0.938 [23.81]
12.0
10.8
10.0
9.1
8.2
7.0
5.8
5.3
0.717 [18.21] 0.938 [23.81]
11.0
12.1
11.2
10.3
9.2
8.0
6.5
5.9
0.733 [18.62] 1.250 [31.75]
10.0
13.8
12.7
11.6
10.4
9.0
7.4
6.7
0.898 [22.81] 1.500 [38.10]
9.0
15.0
15.0
14.2
12.7
11.0
9.0
8.2
1.000 [25.40] 2.250 [57.15]
8.0
15.0
15.0
15.0
15.0
13.6
11.1
10.0
1.200 [30.48] 2.250 [57.15]
6.0
15.0
15.0
15.0
15.0
15.0
12.4
11.4
200 WVDC
0.512 [13.01] 1.250 [31.75]
20.0
7.3
7.3
7.3
7.3
7.2
5.9
5.4
0.698 [17.73] 1.250 [31.75]
15.0
12.0
12.0
11.3
10.1
8.7
7.1
6.5
0.747 [18.97] 1.500 [38.10]
13.0
15.0
13.8
12.6
11.3
9.8
8.0
7.3
0.862 [21.89] 1.750 [44.45]
11.0
15.0
15.0
14.7
13.1
11.4
9.3
8.5
1.030 [26.16] 2.250 [57.15]
9.0
15.0
15.0
15.0
15.0
13.8
11.3
10.3
1.440 [36.58] 2.250 [57.15]
6.0
15.0
15.0
15.0
15.0
15.0
14.1
12.8
400 WVDC
0.713 [18.11] 1.500 [38.10]
19.0
9.5
9.5
9.5
9.5
9.5
7.8
7.1
0.895 [22.73] 1.750 [44.45]
15.0
15.0
15.0
15.0
13.4
11.6
9.5
8.7
1.086 [27.58] 1.750 [44.45]
12.0
15.0
15.0
15.0
15.0
13.1
10.7
9.8
1.192 [30.28] 2.250 [57.15]
10.0
15.0
15.0
15.0
15.0
15.0
12.5
11.4
1.668 [42.37] 2.250 [57.15]
6.0
15.0
15.0
15.0
15.0
15.0
15.0
14.1
Terminal Style H - Units with Terminal Lugs
100 WVDC
0.531 [13.49] 0.875 [22.23]
15.0
10.3
9.5
8.7
7.8
6.7
5.5
5.0
0.596 [15.14] 1.062 [26.97]
12.0
12.0
11.0
10.0
8.9
7.8
6.3
5.8
0.717 [18.21] 1.062 [26.97]
11.0
13.3
12.3
11.2
10.0
8.7
7.1
6.5
0.733 [18.62] 1.375 [34.93]
10.0
14.8
13.7
12.5
11.2
9.7
7.9
7.2
0.898 [22.81] 1.625 [41.28]
9.0
17.8
16.5
15.0
13.5
11.7
9.5
8.7
1.000 [25.40] 2.375 [60.33]
8.0
21.6
20.0
18.3
16.4
14.2
11.6
10.6
1.200 [30.48] 2.375 [60.33]
6.0
24.3
22.5
20.5
18.4
15.9
13.0
11.9
200 WVDC
0.512 [13.00] 1.375 [34.93]
20.0
7.3
7.3
7.3
7.3
7.3
6.4
5.8
0.698 [17.73] 1.375 [34.93]
15.0
14.3
13.3
12.1
10.8
9.4
7.7
7.0
0.747 [18.97] 1.625 [41.28]
13.0
15.9
14.7
13.5
12.0
10.4
8.5
7.8
0.862 [21.89] 1.875 [47.63]
11.0
18.3
17.0
15.5
13.9
12.0
9.8
8.9
1.030 [26.16] 2.375 [60.33]
9.0
22.4
20.7
18.9
16.9
14.6
12.0
10.9
1.440 [36.58] 2.375 [60.33]
6.0
27.4
25.4
23.2
20.7
17.9
14.7
13.4
400 WVDC
0.713 [18.11] 1.625 [41.28]
19.0
9.5
9.5
9.5
9.5
9.5
8.3
7.5
0.895 [22.73] 1.875 [47.63]
15.0
15.0
15.0
15.0
14.2
12.3
10.0
9.1
1.086 [27.58] 1.875 [47.63]
12.0
21.1
19.5
17.8
15.9
13.8
11.3
10.3
1.192 [30.28] 2.375 [60.33]
10.0
24.4
22.6
20.6
18.5
16.0
13.1
11.9
1.668 [42.37] 2.375 [60.33]
6.0
30.0
27.8
25.4
22.7
19.7
16.1
14.7
STANDARD RATINGS
in inches [millimeters]
CAPACITANCE
(µF)
PART NUMBER**
1.0*
2.0
3.0
5.0
10.0*
20.0
30.0
1.0*
2.0*
3.0
5.0*
10.0*
20.0
1.0*
2.0*
3.0*
5.0*
10.0*
735P105X9100L
735P205X9100L
735P305X9100L
735P505X9100L
735P106X9100L
735P206X9100L
735P306X9100L
735P105X9200L
735P205X9200L
735P305X9200L
735P505X9200L
735P106X9200L
735P206X9200L
735P105X9400L
735P205X9400L
735P305X9400L
735P505X9400L
735P106X9400L
1.0
2.0
3.0
5.0
10.0
20.0
30.0
1.0
2.0
3.0
5.0
10.0
20.0
735P105X9100H
735P205X9100H
735P305X9100H
735P505X9100H
735P106X9100H
735P206X9100H
735P306X9100H
735P105X9200H
735P205X9200H
735P305X9200H
735P505X9200H
735P106X9200H
735P206X9200H
1.0
735P105X9400H
2.0
735P205X9400H
3.0
735P305X9400H
5.0
735P505X9400H
10.0
735P106X9400H
*
These ratings are stocked.
** Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 5 % tolerance, change the “X9” in the Part Number to “X5”.
ORDERING INFORMATION
735P
TYPE
105
CAPACITANCE
X9
CAPACITANCE
TOLERANCE
X9 = ± 10 %
X5 = ± 5 %
100
DC VOLTAGE RATING
L
TERMINAL STYLE
This is expressed in picofarads. The first
two digits are the significant figures. The
third is the number of zeros to follow.
This is expressed in volts.
L = Wire Leads
H = Lugs
www.vishay.com
26
For technical questions, contact spresale@vishay.com
Document Number: 42031
Revision: 07-Feb-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
