85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Q: I was not present at the time, but the chip burned out after power was turned on, and some even R16 burned out, and the microcontroller was also affected. What is the reason? Where can we start?A: ...
"Open source" can mean many things in hardware design: open specifications, free designs, designs where patent/copyright protection has expired...Therefore, the value of open source hardware varies. M...
In recent years, on-chip memory has developed rapidly. According to the International Technology Roadmap for Semiconductors (ITRS), with the maturity of ultra-deep submicron manufacturing technology a...
[b][font="][size=16px]Analysis of STM32 pin short circuit to ground[/size][/font][/b][align=left]The inside of the chip is also a multi-layer structure like PCB. Generally, integrated circuits have at...
[i=s]This post was last edited by Digital Leaf on 2021-6-9 21:00[/i]I hesitated when it was first released last year, and then the chip prices skyrocketed, and the board prices also rose.The transpare...
[size=4] This type of DSP generally integrates a dedicated coprocessor for a certain type of application, thereby accelerating the DSP algorithm. TI's research shows that for tasks such as MPEG4 encod...
Recently, Huawei's official announcement of "making cars" has ignited the automobile manufacturing industry chain. As one of my country's leading brands of infrared thermal imaging, investors have re...[Details]
Importance of wiring harness layout for electric vehicles 随着新能源汽车的高速发展和市场保有量不断增长，用户对电动汽车的安全性、可靠性及环保要求不断提高，汽车上的新能源电器件显著增加，同时诸如高速视频数据传输等新的线种的出现，从而使大量的、不同种类的线束在有限的汽车空间中如何更有效合理布置已成为汽车产品开发面临的问题。 Compare...[Details]
Volkswagen aims to launch 30 pure electric vehicles by 2025, with an annual production of 2 to 3 million units. Volkswagen seems to be in a hurry to achieve this goal. According to Volkswagen's early...[Details]
1. Overview of ARM Cortex Processor
With the continuous expansion of embedded technology application fields, the requirements for embedded systems are getting higher and higher, and the microprocess...[Details]
According to foreign media reports, MIT announced the top ten scientific and technological achievements of the year, including helping paralyzed patients walk again, "face recognition" as a means of ...[Details]
Electric vehicles are vehicles that are fully or partially driven by electric motors. Currently, there are three main types of vehicles: pure electric vehicles, hybrid electric vehicles, and fuel c...[Details]
Recently, Apple announced that it would stop selling its products in Russia and shut down some functions. It would no longer sell iPhones in Russia and limit functions such as Apple Pay. Indeed, this...[Details]
Each GPI/O port has two 32-bit configuration registers (GPIOx_CRL, GPIOx_CRH), two 32-bit data registers (GPIOx_IDR and GPIOx_ODR), a 32-bit set/reset register (GPIOx_BSRR), a 16-bit reset register (...[Details]
Lenovo will soon launch the Savior Y90 Dual Engine Air-Cooled Gaming Phone, which has a built-in active cooling turbo fan. Today, the official released a video showing the back of the phone. ...[Details]
As the automotive industry continues to adopt 48V systems in hybrid electric vehicles (HEVs), the need for signal isolation in vehicle networks becomes more important. Without reliable and effective ...[Details]
Electronic meters are used to measure gas, water, heat and electricity. They are public meters that we use every day but rarely pay attention to, such as gas and water meters, heat meters, and elect...[Details]
IT efforts to overcome the epidemic: enterprises find a balance between new technology deployment, cyber attack response and skills gap VIAVI’s 14th Annual State of the Network Survey Finds 51% of ...[Details]
(1) The first stage (1974-1976): The manufacturing process was backward, the integration was low, and the dual-chip form was adopted. Typical representative products include Fairchild's F8 series. It...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
