X1M-08-411B

introduction Among the newly developed products, there is a long aluminum base of model Q7, on which two flat-bottomed blind holes of φ3.7×1.65 are to be processed. Due to the high precision and la...[Details]

This article describes the development of the BootLoader lower machine. I took on a project on the third day after arriving at the new company, and it has only been partially completed so the updat...[Details]

    1. Key points of timer/counter PWM design     According to the characteristics of PWM (Pulse Width Modulation (PWM: (Pulse Width Modulation) is a very effective mode of controlling analog circuit...[Details]

@tiny - zero page (0x00-0xff) Declaration: @tiny char a a).bsct - initialized variable in zero page area b).ubsct - uninitialized variable in zero page c).bit - bit operation segment d).share @near...[Details]

According to CINNO Research, SDC has stopped the production of MNT LCD panels beyond the existing contracted quantity and has officially started the plan to exit the LCD business. As a result, global...[Details]

Nowadays, electromagnetic flowmeters have been widely used, but in order to make better use of them, we cannot ignore their detection. The following article will talk about several special tests about...[Details]

1. General rules for automobile wiring Generally, a single-wire system is adopted, electrical equipment is connected in parallel, the negative pole is grounded, and the lines are distinguished by w...[Details]

Storage testing is a dynamic testing technology that places a miniature data acquisition and storage tester on the object to be tested or at the test site, with no effect on the object to be tested...[Details]

I have done Modbus RTU serial communication between a microcontroller and the following 20 PLCs. Now I would like to share the correspondence table between the input, output and register components...[Details]

According to the Science and Technology Innovation Board Daily, SMIC's key supply for mature processes has obtained a license.   The report pointed out that reporters learned that the licenses includ...[Details]

The three-day World Sensor Conference ended perfectly at the Zhengzhou International Convention and Exhibition Center. The purpose of this sensor conference is to promote the exchange of the latest a...[Details]

Since the release of Xiaopeng's new car P5 in 2021, which marked the beginning of the laser radar installed in smart cars, the mass production of laser radar has gradually become possible. In June th...[Details]

Recently, Ouyang Minggao, academician of the Chinese Academy of Sciences and professor of Tsinghua University, delivered a speech titled "Safety Research on High-Specific Energy Batteries and Develop...[Details]

1. The EQU instruction is used to assign a value or register name to a specified symbol name. Format: symbol name EQU expression          Symbolic Name EQU Register Name The expression must be a simp...[Details]

CNC (Computer Numerical Control) system is a kind of automation equipment controlled by computer, which is widely used in mechanical processing, mold manufacturing, aerospace and other fields. CNC ...[Details]