* See Page 8 for additional developed frequencies.
Check with factory for availability of frequencies not listed.
Description
CTS Model 656P/L is a low cost, high performance PLL clock oscillator supporting differential LVPECL or LVDS
outputs. Employing the latest IC technology, M656P/L has excellent stability and low phase jitter performance.
Ordering Information
Model
656
Output
Type
P
Frequency Code
[MHz]
XXX or XXXX
Frequency
Stability
3
Temperature
Range
I
Supply
Voltage
3
Packaging
T
Code
P
L
E
V
Output
LVPECL - Pin 1 Enable
LVDS - Pin 1 Enable
LVPECL - Pin 2 Enable
LVDS - Pin 2 Enable
Code
6
5
4
3
Stability
±20ppm
2
±25ppm
3
±30ppm
±50ppm
Code
2
3
Voltage
+2.5Vdc
+3.3Vdc
Code
Frequency
Product Frequency Code
1
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables.
3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
2] 6I Stability/Temperature combination not available.
3] Check factory availability when paired with 'I' temperature code.
Code Temp. Range
C
-20°C to +70°C
-40°C to +85°C
I
Packing
Code
1k pcs./reel
T
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
38hot bought a second-hand power supply. There was too much dust inside. It was not easy to use a vacuum cleaner or a rag. Finally, I thought of this trick and it worked.This content is originally cre...
[b][color=#5E7384]This content is originally created by EEWORLD forum user [size=3]tiankai001[/size]. If you need to reprint or use it for commercial purposes, you must obtain the author's consent and...
[size=4](1) The RC oscillator circuit has a simple structure, is easy to adjust, and is economical and reliable. [/size] [size=4] [/size] [size=4](2) The oscillation frequency of the RC oscillator cir...
[i=s]This post was last edited by Li Baiyi on 2021-12-22 21:11[/i]1 Test baud rate
AT
2 Turn off echo
ATE0
3 Check whether the SIM card is normal. If it returns to normal, go to the next step
AT+ECICC...
Create a rotating LED using the classic 555. When the switch is pressed, the LED rotates very fast. After the switch is released, the rotation gradually slows down and eventually stops.From: http://ww...
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
