‘102 S
ERIES
R
ADIO
/ IR E
NCODER
T
RANSMITTERS
•
•
•
•
•
•
•
•
•
•
Highly Secure
QM, FM or Infra Red
Protocol
Frequency Options: 315, 433 or 916MHz
LED Indication Of Transmission
1,2 or 4 Switch Versions Expandable To 15
IP40 Rated Enclosure
User Customisable Overlay
Board Level Programmable
315MHz versions FCC Compliant
433MHz versions EMC Compliant
Note: Standard FM units Shown, narrowband FM
transmitters include external ¼ wave whip antenna
The RF Solutions 102 range of transmitter encoders are available as either FM, FMNB radio or Infra Red.
The encoders use the KEELOQ encryption algorithm providing the worlds most advanced high security
protocol. Each encoder may be used with one of RF Solutions decoders, or with one of the KEELOQ
decoder I/C’s.
Alternatively, the user may decode the KEELOQ algorithm and embed within a PIC Microcontroller.
(Please see datasheet DS600).
When paired with one of the KEELOQ Rx decoder boards, a complete high security “code hopping”
remote control system may be achieved. The transmitter is supplied as a complete product with battery
ready to operate (PP3). Each encoder can be board level programmed with a specific manufacturer’s ID
code if required
Custom solutions may also be supplied unique to customer specific requirements. Please contact RF
Solutions for further information.
Block Diagram
V
CC
ANTENNA
SW5-15
SW4
SW3
SW2
SW1
FM TX
KEELOQ
MCU
LED
DS102-9
July ‘06
©2006 Reg. No. 227 4001, England
Page 1
‘102 S
ERIES
R
ADIO
/ IR E
NCODER
T
RANSMITTERS
Power Supply
The circuit has been designed to operate from a single PP3 battery supply. This will provide in excess of
1,000,000 transmissions.
Note:
reverse voltage polarity connection may cause damage to the circuit.
License Exemption (Radio Transmitters)
Europe: The transmitter encoders use ECM compliant radio transmitter modules and complies with
ETSI330-220 and ETSI300-683.
USA: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation."
KEELOQ Protocol Configuration
Each encoder is supplied ready programmed with a unique random serial number. The decoder has the
ability to memorise this serial number using a simple learn procedure (please see decoder datasheet).
How does KEELOQ technology work?
KEELOQ is based on a code hopping algorithm which provides Rock Solid Security. KEELOQ uses
a programmable 64-bit encryption key that is unique to each device to generate 32-bit hopping
code. The key length and hopping code combination reduces the possibility of unwanted access,
due to code grabbing and code scanning, to essentially zero. Such CIA-like levels of security are
desirable, but many manufacturers would expect them to be cost-prohibitive. KEELOQ offers the
solution for affordable, Rock Solid Security that is the future of technology for the cars, homes and
offices we wish to protect.
Adding Additional Switches
Additional switches may be added through Connector J3. The four connections of J3-1, 2, 3, & 4
represent the four input lines to the HCS360 encoder device. These may be connected to a binary coded
decimal (bcd) input to obtain 1 of 16 states.
In addition to this, J3-7 = 5Vdc and J3-8, 9, 10 = GND.
Absolute Maximum Ratings
Supply Voltage (V
CC
to GND)
Storage Temperature
Operating Temperature
Dimensions
+5.5 to +15.8 Volts
-10°C to +70°C
0°C to +55°C
110mm x 65mm x 24mm
Electrical Characteristics
Supply Voltage
Supply Current
Frequency
315MHz FM
433MHz QM / FM Wideband
433MHz FM Narrow band
915MHz Narrow band
RF Output Power (ERP) @ 433 MHz
Min
8
11
Typical
9
14
315.00
433.92
434.525
914.50
Max
12
21
Dimension
V
mA
MHz
434.550
914.50
10
434.500
914.50
-
mW
DS102-9
July ‘06
©2006 Reg. No. 227 4001, England
Page 2
‘102 S
ERIES
R
ADIO
/ IR E
NCODER
T
RANSMITTERS
‘FM102’ QM Series Encoders (Red Transmit LED)
Part Number
102C1-433Q
102C2-433Q
102C4-433Q
Description
QM Encoder 1 Sw
QM Encoder 2 Sw
QM Encoder 4 Sw
Freq
(MHz)
433.92
433.92
433.92
Range**
(Metres)
150
150
150
Compatible
Decoders
FM-001B-433
FM-0011-433
008-433Q
U105
‘FM102’ FM Series Encoders (Yellow Transmit LED)
Part Number
102C1-315F
102C2-315F
102C4-315F
102C1-433F
102C2-433F
102C4-433F
Description
FM Encoder 1 Sw
FM Encoder 2 Sw
FM Encoder 4 Sw
FM Encoder 1 Sw
FM Encoder 2 Sw
FM Encoder 4 Sw
Freq
(MHz)
315
315
315
433.92
433.92
433.92
Range**
(Metres)
200
200
200
200
200
200
001B-433F
0011-433F
008-433F
105-433F
008-315F
Compatible
Decoders
‘FM102’ Narrow Band Series Encoders (Red Transmit LED)
Freq
Part Number
Description
(MHz)
102C1-525N
102C2-525N
102C4-525N
FM Narrow Band Enc 1 Sw
FM Narrow Band Enc 2 Sw
FM Narrow Band Enc 4 Sw
434.525
434.525
434.525
Range**
(Metres)
1000
1000
1000
Compatible
Decoders
105-433NB
‘IR102’ Series Infra-Red Encoders (Red Transmit LED)
Part Number
102C1-IR3
102C4-IR3
Description
Infra Red Encoder 1 Sw
Infra Red Encoder 4 Sw
Range**
(Metres)
20
U105
Compatible
Decoders
20
Should you require further assistance please contact:
R. F. Solutions Ltd.,
Unit 21, Cliffe Industrial Estate,
South Street,
Lewes,
E Sussex, BN8 6JL, England
Tel +44 (0)1273 898 000
Fax +44 (0)1273 480 661
Email sales@rfsolutions.co.uk http://www.rfsolutions.co.uk
R F Solutions is a member of the Low Power Radio Association.
All Trademarks acknowledged and remain the property of the respected owners
.
Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such
information. Use of R.F.Solutions as critical components in life support systems is not authorised except with express written approval from R.F.Solutions Ltd.
DS102-9
July ‘06
©2006 Reg. No. 227 4001, England
Page 3
京公网安备 11010802033920号
EEWORLD
