P5-312328 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-312328

P5-312328: DescriptionPushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount-threaded; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-312328 Overview

Pushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount-threaded

P5-312328 Parametric

Parameter Name	Attribute value
Objectid	1723570986
Reach Compliance Code	unknown
ECCN code	EAR99
YTEOL	8.4
Actuator angle
Actuator length	0.437 inch
Actuator material	NYLON
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	GRAY, WATERPRF BLK BEZ
body height	22.26 mm
Body length or diameter	22.23 mm
Nozzle length	0.313 inch
Casing type	5/8-24
Center contact plating	GOLD
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated load M	3A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact function	ON-OFF
contact time	SNAP ACTION
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VAC V
Electrical life	25000 Cycle(s)
End contact plating	GOLD
Shell material	ALUMINUM ALLOY
illumination	NON-ILLUMINATED
JESD-609 code	e4
Installation features	PANEL MOUNT-THREADED
Maximum operating force	17.79 N
seal	EPOXY TERMINAL SEALED; IP68
surface mount	NO
Switch action	ALTERNATE
switch function	SPST
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Termination type	SOLDER

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

Test circuit to detect the quality of the crystal and its oscillation frequency

electronic fuse circuit

One-way operation full-wave rectification point dynamic energy consumption braking control circuit

Two-input transistor NOR gate circuit

Two-bus analog ion smoke fire detector circuit

Roxy MX-5 movement protection circuit

MII RMII RGMII GMII: Recently I have been studying routines in a FPGA from Heijin, one of which is a non-IP core Gigabit Ethernet routine. I want to write down my learning experience and lessons, and hope that everyone wi...; heningbo FPGA/CPLD

Tips Summary: A Guide to Bitwise Operations: I won't tell you how efficient the bitwise algorithm is. If you don't believe me, you can use 1 billion data to simulate it. Today I will tell you some classic examples of bitwise operations. However,...; 灞波儿奔 DSP and ARM Processors

Wi-Fi architecture and future development of Wi-Fi standards: The common architecture of today's Wi-Fi products and the features they support, including the hardware requirements from Wi-Fi 4 (802.11n) to the latest Wi-Fi 6 (802.11ax). Wi-Fi 6E (6GHz 802.11ax), ...; alan000345 RF/Wirelessly

Problems encountered when opening old version with new version of IAR and solutions: 1.__nounwind declaration is incompatible with "__nounwind __interwork __softfp unsigned int __iar_builtin_STREXB(unsigned char, unsigned char volatile *)Solution: Right-click the project and enter opt...; fish001 Microcontroller MCU

There is a problem with the PCB copper layout, please help!: There is no problem with the PCB wiring layout, but when the copper is laid, the GND copper line width is different. Please tell me where the problem is!...; 54545 PCB Design

[Project source code] [Modelsim FAQ] Analysis and Synthesis should be completed: This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...; 小梅哥 Altera SoC

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components