PAT
www.vishay.com
Vishay Dale Thin Film
Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, Hi-Rel COTS
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Resistance range: 2.5
Ω
to 3 MΩ
AEC-Q200 qualified
AEC-Q200 ESD rated class 1C (2 kV)
Available
Laser trimmed to any value
Moisture resistant to MIL-STD-202, method 202
Available
Tantalum nitride resistor film on high purity
alumina substrate
100 % visual inspected per MIL-PRF-55342
Available
2 kV (HBM) ESD rating
Sn / Pb solder version available
Laser-trimmed tolerances to ± 0.1 %
Load life stability < 0.05 % at 1000 h at 70 °C
Very low noise and voltage coefficient
(< -30 dB, < 0.1 ppm/V)
Sulfur resistant (per ASTM B809-95 humid vapor test)
Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
These chip resistors are available in wraparound
terminations styles in 8 case sizes. They incorporate self
passivated enhanced tantalum nitride resistor film to give
superior performance on moisture resistance, electrostatic
discharge, voltage coefficient, power handling and
resistance stability. The terminations consist of an adhesion
layer, a leach resistant nickel barrier, and solder coating.
Both, lead (Pb)-free solder (standard) and tin / lead solder
(non-standard) options are available. This product will
out-perform all requirements of AEC-Q200. Additional
custom lot screening per MIL-PRF-55342 available upon
request. Contact product marketing for an estimate.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
Solder
Coating
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride
2.5
Ω
to 3 MΩ
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 1.0 %
± 0.05 %
Not applicable
Less than 0.1 ppm/V
75 V to 200 V
-55 °C to +155 °C
-55 °C to +155 °C
< -30 dB
100 ppm
CONDITIONS
-
-
-55 °C to +125 °C
+25 °C
2000 h at 70 °C rated power
-
-
-
-
-
-
1 year at 25 °C
COMPONENT RATINGS
CASE SIZE
0402
0603
0805
1206
1505
2208
2010
2512
POWER RATING (mW)
50
150
200
400
400
750
800
1000
WORKING VOLTAGE (V)
75
75
100
200
150
150
200
200
RESISTANCE RANGE (Ω)
20 to 51K
2.5 to 130K
10 to 301K
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
10 to 3M
Revision: 28-Jun-2021
Document Number: 60024
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS
in inches
D
T
D
W
E
L
L
T
CASE SIZE
0402
0603
0805
1206
1505
2010
2208
2512
L
0.041 ± 0.003
0.064 ± 0.006
0.080 ± 0.006
0.126 ± 0.008
0.155 ± 0.007
0.209 ± 0.009
0.230 ± 0.007
0.259 ± 0.009
W
0.022 ± 0.003
0.032 ± 0.005
0.050 ± 0.005
0.063 ± 0.005
0.050 ± 0.005
0.098 ± 0.005
0.075 ± 0.005
0.124 ± 0.005
T
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
D
E
0.010 ± 0.005
0.010 ± 0.005
0.012 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010
0.015 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
ENVIRONMENTAL TESTS
(Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST
Resistance Temperature Characteristic
Max. Ambient Temp. at Rated Wattage
Max. Ambient Temp. at Power Derating
High Temperature Storage
ΔR
Temperature Cycling
ΔR
Moisture Resistance
ΔR
Biased Humidity
ΔR
Life
ΔR
Mechanical Shock
ΔR
Vibration
ΔR
Resistance to Soldering Heat
ΔR
Electrostatic Discharge
ΔR
Solderability
Visual
Terminal Strength
ΔR
Flame Retardance
Visual
LIMITS
PER AEC-Q200
-55 °C to +125 °C
± 50 ppm/°C
+70 °C
+150 °C
MIL-STD-202, 108, 1000 h at 125 °C
± 0.1 %
JESD22, JA-104, 1000 cycles, -55 °C to +125 °C
± 0.15 %
MIL-STD-202, 106
± 0.20 %
MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P
± 0.10 %
MIL-STD-202, 108 at 125 °C, 1000 h
± 0.1 %
MIL-STD-202, method 213, condition C
± 0.1 %
MIL-STD-202 method 204, 10 Hz to 2 kHz
± 0.1 %
MIL-STD-202 method 210, condition D
± 0.10 %
AEC-Q200-002 at 2 kV, human body
± 0.10 %
J-STD-002, method B and B1
95 %
AEC-Q200-006 at 1 kg for 60 s
± 0.10 %
AEC-Q200-001 para 4.0
CONDITIONS
TYPICAL VISHAY
PERFORMANCE
± 35 ppm/°C
+70 °C
+150 °C
+ 0.016 %
+ 0.013 %
+ 0.0010 %
+ 0.004 %
+ 0.0220 %
+ 0.004 %
+ 0.0030 %
+ 0.0150 %
- 0.032 %
Acceptable
+ 0.009 %
Acceptable
DERATING CURVE
Axis Title
100
10000
80
2nd line
Rated Power (%)
1000
1st line
2nd line
100
20
10
0
70
125
155
Ambient Temperature (°C)
60
40
0
Revision: 28-Jun-2021
Document Number: 60024
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PAT1206E1002BST1
P
GLOBAL
MODEL
PAT
A
CASE
SIZE
0402
0603
0805
1206
1505
2010
2208
2512
T
1
2
0
6
E
1
0
0
2
B
S
T
1
TCR
CHARACTERISTIC
E
= ± 25 ppm/°C
H
= ± 50 ppm/°C
K
= ± 100 ppm/°C
L
= ± 200 ppm/°C
RESISTANCE
The first 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10
Ω
1000 = 100
Ω
1002 = 10 kΩ
TOLERANCE
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
G
= ± 2.0 %
J
= ± 5.0 %
TERMINATION
S
= wraparound
lead (Pb)-free
solder
w/nickel barrier
B
= wraparound
Sn / Pb
w/nickel barrier
PACKAGING
BULK
BS
= 100 min., 1 mult.
WAFFLE
WS
= 100 min., 1 mult.
W0
= 100 min., 100 mult.
WI
= 100 min., 1 mult.
(item single lot date code)
WP
= 100 min., 1 mult.
(package unit single lot
date code)
TAPE AND REEL
T0
= 100 min., 100 mult.
T1
= 1000 min., 1000 mult.
T3
= 300 min., 300 mult.
T5
= 500 min., 500 mult.
TF
= full reel
TS
= 100 min., 1 mult.
TI
= 100 min., 1 mult.
(item single lot date code)
TP
= 100 min., 1 mult.
(package unit single lot
date code)
Note
(1)
Preferred packaging code
RESISTANCE
10
Ω
to 1 MΩ
5
Ω
to 10
Ω
1.0
Ω
to 5
Ω
TCR
(ppm/°C)
25, 50, 100, 200
100, 200
200
TOLERANCE
(%)
0.1, 0.5, 1, 2, 5
1, 2, 5
1, 2, 5
Revision: 28-Jun-2021
Document Number: 60024
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
Real-time operating system RTOS
京公网安备 11010802033920号
EEWORLD
