SPR2213, SPR2214
www.vishay.com
Vishay Dale
Wirewound Resistors, Special Purpose, Commercial, High Power
FEATURES
High power / size ratio
Quick connect terminals
Complete welded construction
Available
High surge capability
Non-inductive styles available
Available
Special inorganic potting compound and
ceramic case provide
high
thermal
Available
conductivity in a fireproof package
• SPR2214 is available with a center terminal option
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
•
•
•
•
•
•
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
SPR2213
SPR2214
HISTORICAL
MODEL
SPR-2213
SPR-2214
POWER RATING
P
25 °C
W
WITHOUT HEAT SINK
40
50
POWER RATING
P
25 °C
W
WITH HEAT SINK
(1)
70
100
RESISTANCE RANGE
0.5 to 24K
1.0 to 44K
TOLERANCE
±%
5, 10
5, 10
Note
(1)
Recommended heat sink is 12" x 12" x 0.125" thick aluminum panel (294 sq. in. surface area).
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Dielectric Withstanding Voltage
UNIT
ppm/°C
-
V
°C
V
AC
SPR2213, SPR2214 RESISTOR CHARACTERISTICS
± 30 10
and above; ± 50 below 10
10 x rated power for 5 s
(P x R)
1/2
-65 to +275
2500
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: SPR221375R000JD
S
P
R
2
2
VALUE
1
3
7
5
R
0
0
0
J
D
SPECIAL
(dash number)
(up to 2 digits)
from
1 to 99
as
applicable
GLOBAL MODEL
SPR2213
SPR2214
TOLERANCE
J
= ± 5.0 %
K
= ± 10.0 %
PACKAGING
D
= skin pack (S51)
K
= RoHS compliant,
skin pack (E51)
R
= decimal
K
= thousand
R15000
= 0.15
1K5000
= 1500
Historical Part Numbering example: SPR-2213 75
5 % S51
SPR-2213
HISTORICAL MODEL
75
RESISTANCE VALUE
5%
TOLERANCE CODE
S51
PACKAGING
Note
• Brackets used with “D” packaging code are not RoHS/Green compliant.
Revision: 23-Jun-16
Document Number: 30224
1
For technical questions, contact:
ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SPR2213, SPR2214
www.vishay.com
DIMENSIONS
in inches [millimeters]
Vishay Dale
SPR2213
W
1.25
[31.75] typical
H
SPR2214
W
A
B
C
H
0.827 [21.01]
± 0.020 [0.508]
0.195 [4.95]
± 0.005 [0.127]
Diameter
0.195 [4.95]
± 0.005 [0.127]
GLOBAL
MODEL
SPR2213
SPR2214
DIMENSIONS
in inches [millimeters]
A
TYPICAL
3.375
[85.73]
4.563
[115.90]
B
± 0.031 [0.794]
3.00
[76.20]
4.125
[104.78]
C
± 0.031 [0.794]
2.50
[63.50]
3.625
[92.08]
W
± 0.005 [0.127]
0.250 x 0.031
[6.35 x 0.794]
0.250 x 0.031
[6.35 x 0.794]
H
TYPICAL
0.810
[20.57]
0.810
[20.57]
MATERIAL SPECIFICATIONS
Element:
copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core:
steatite ceramic
Body:
steatite ceramic case with inorganic potting
compound
Terminals:
nickel plated steel
Bracket:
zinc plated steel
Part Marking:
DALE, model, wattage, value, tolerance, date
code
DERATING
RATED POWER IN %
120
100
80
60
40
20
0
- 65 - 25
25
75
125
175
225
275
HEAT SINK DERATING
RATED POWER IN %
100
80
60
SPR2214
40
20
0
AMBIENT TEMPERATURE IN °C
0
20
40
60
80
100
SPR2213
% OF RECOMMENDED HEAT
SINK
AREA
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
CONDITIONS OF TEST
Rated power applied until thermally stable, then a minimum of 15 min at -55 °C
10 x rated power for 5 s
1000 V
RMS
, 1 min
-65 °C for 24 h
250 h at +275 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100
g’s
for 6 ms, 10 shocks
Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each
1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF”
TEST LIMITS
± (2.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (0.1 % + 0.05
) R
± (2.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (0.2 % + 0.05
) R
± (0.2 % + 0.05
) R
± (3.0 % + 0.05
) R
Revision: 23-Jun-16
Document Number: 30224
2
For technical questions, contact:
ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
