ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC
ELECTRICAL CHARACTERISTICS
CAPACITANCE RANGE:
0.5 pF to 0.10 µF.
TEMPERATURE CHARACTERISTIC:
0 ± 30ppm/°C.
L
W
OPERATING TEMPERATURE RANGE:
-55°C to +125°C.
DISSIPATION FACTOR:
0.1% (max.) @ + 25°C,
@1 MHz
≤
1000 pF; @1 KHz >1000 pF
INSULATION RESISTANCE
@ + 25°C and rated Vdc:
100,000 megohms (min.) or 1000 ohm-farads (min.),
whichever is less.
DIELECTRIC WITHSTANDING VOLTAGE:
250% of rated voltage for 5 ± 1 seconds, 50 milliamps (max.).
Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
Temperature Coefficient
Aging Rate
Voltage Coefficient of Capacitance
Temperature (Celsius)
Impedance vs. Frequency
Dissipation Factor vs. Frequency
Minimum IR vs. Temperature
Temperature (Celsius)
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03). Copies of
these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and
Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
[align=left][font=宋体]Although [/font]Java[font=宋体] is the most used language in IoT development, [/font][font=Calibri]Java[/font][font=宋体] and [/font][font=Calibri]Python[/font][font=宋体] follow closel...
[size=4] Reasons for using SMD beads and SMD inductors: Whether to use SMD beads or SMD inductors depends mainly on the application. SMD inductors are needed in resonant circuits. When it is necessary...
I want to use CC2541 to make a remote control with 10 buttons, low power sleep, and external interrupt wake-up.
I have a question, the STM32 external interrupt IO port numbers cannot be repeated. For ...
[align=left]As the carrier of various components and the hub of circuit signal transmission, PCB has become the most important and critical part of electronic information products. Its quality and rel...
My friend Lu is very good at keeping up with the trend. He has already installed XP on his hard drive just a few days after the Chinese version of Windows XP was released. The installation went smooth...
The article is a trap. The main problems with these articles are: 1. Over exaggerating what is needed to learn this technology. 2. The recommended learning path is not systematic. 3. Overly dispar...[Details]
Direct Memory Access (DMA): It allows the hardware subsystem (peripheral) inside the CPU to read and write the system memory independently and directly. It allows hardware devices of different ...[Details]
According to Business Korea, there are reports that if TSMC sets up a factory in the United States, Samsung Electronics will expand its US factory as a counterattack strategy. The impact of the epi...[Details]
1. Preparation Download software: u-boot Download address: ftp://ftp.denx.de/pub/u-boot/ u-boot-2009.11.tar.bz2 is the reference document version of "friendlyARM" u-boot-2010.03.tar.bz2 ...[Details]
The connection method of two transistors as shown in Figure 1 is called a Darlington circuit,
and its amplification factor is the product of the amplification factors of the two transistors.
...[Details]
1. Why should we discuss the electromagnetic interference suppression performance of operational amplifiers? The performance of the integrated operational amplifier for differential amplification of ...[Details]
On April 23, according to MacRumors, a leaked version of the EU Digital Markets Act (DMA) indicated that Apple may be forced to make major changes to the App Store, Messages, FaceTime, third-par...[Details]
China Energy Storage Network News:
If the interests of both parties in the "wall-to-wall electricity sales" transaction and the power grid companies are comprehensively considered and the c...[Details]
STM32 serial communication using printf to send data configuration method (development environment Keil RVMDK
It is very convenient to use printf to send data in the STM32 serial communication progra...[Details]
#include reg51.h #include "main.h" #include "intrins.h" //Use T2 timer 2 to control the baud rate of serial port 1 #define FOSC 18432000L //System frequency #define BAUD 9600 //Serial port 1 bau...[Details]
Abstract: The aluminum alloy code is based on the AA standard of the American aluminum company, and uses four digits to represent various alloys.
The aluminum alloy code is based on the AA...[Details]
What if I change the parameter configuration? Then compile again to package errors As follows In fact, we are close to here. In the article "Transplanting s3c2440 ads program to keil (Part 2)"...[Details]
Providing complete EtherCAT solutions for industrial automation New 6-channel EU series ECAT-4XMO and ECAT-TRG4 modules integrate software and hardware to accelerate the modernization of smart f...[Details]
With the development of modern society and the progress of science and technology, many high-rise buildings and intelligent buildings have emerged. Elevators, as an important means of transportation i...[Details]
Under the light of science and technology, the big model has floated from the palace of the cloud to the stage of the terminal. This historic leap not only gives data processing the wings of speed,...[Details]