RBD, RBF, RBH Series
Vishay Foil Resistors
High Precision Foil Flip Chip Resistor for Load Life
High Precision Foil Flip Chip Resistor for Load Life
Stability of 0.05% with Low Values from 0.005Ω, Power to 1.5W,
35% Space Saving vs. Wraparound Design
FEATURES
• Temperature coefficient of resistance (TCR):
0±10 ppm/°C (+55°C to +125°C)
• Resistance range: 0.005Ω to 1Ω
RBH
RBF
RBD
• Tolerance: to ±0.5%
•
Power rating to: 1.5W at + 70°C
•
Load life stability:
±0.05% at 70°C, 2000 h at Rated Power
• Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no
extra cost or delivery (e.g., 0R123 vs. 0R1)
• Non-inductive, non-capacitive design
• Short time overload: ±0.03 % (300 ppm)
• Non-hot-spot design
• Voltage coefficient: 0.1 ppm/V
• Non-inductive: 0.08 μH
• Terminal finishes available: lead (Pb)-free, tin/lead alloy
INTRODUCTION
The Bulk Metal
®
Foil (BMF) technology out-performs all
other resistor technologies available today for applications
that require high precision and high stability, and allows
production of customer oriented products designed to
satisfy challenging and specific technical requirements.
The BMF provides an low and predictable Temperature
Coefficient of Resistance (TCR) and excellent load life
stability for high precision applications.
The RB Series also offers excellent load life stability, tight
tolerance, low current noise, and low voltage coefficient,
all in the same resistor.
The flip chip configuration provides a substantial PCB
space saving of more than 35% vs. a surface-mount chip
with wraparound terminations. The RB Series is available
in any value within the specified resistance range.
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FIGURE 1—POWER DERATING CURVE
TABLE 1—TCR, RESISTANCE RANGE,
TOLERANCE, RATED POWER
Type
TCR (ppm/°C)
–55°C to 125°C
0±50
RBD
0±25
0±10
0±50
RBF
0±25
0±10
0±50
RBH
0±10
Resistance
Range
(Ω)
0.005 to 0.01
0.01 to 0.1
0.1 to 1
0.005 to 0.01
0.01 to 0.1
0.1 to 1
0.001 to 0.01
0.01 to 0.1
Resistance
Tolerance
(%)
±5
±1, ±2, ±5
±0.5, ±1, ±2,
±5
±5
±1, ±2, ±5
±0.5, ±1, ±2,
±5
±1, ±2, ±5
±0.5, ±1, ±2,
±5
Rated
Power
(W)
at 70°C
0.5
FIGURE 2—CONSTRUCTION
5
6
3
1 Ceramic substrate (high-purity Alumina)
2 Heat-resistant bonding layer
3 Bulk Metal
®
foil
2
1
4 Metal plating
5 Solder
6 Solder-resist
1
4
1.5
Document No.: 63238
Revision: 27-Mar-2013
For questions, contact
foil@vishaypg.com
www.vishayfoilresistors.com
1
RBD, RBF, RBH Series
Vishay Foil Resistors
TABLE 2—DIMENSIONS AND LAND PATTERN
(Dimensions in mm)
RBD, RBF
L
W
1
E
C
B
T
RBH
L
W
2
W
1
V
I
V
W
I
T
RBD, RBF
RBH
D
A
W
L
1
L
2
C
B
W
3
L
1
L
2
I: Current Sensing Terminal
V: VoltageTerminal
Dimensions
Type
L
W
L
1
L
2
W
1
T
3.2±0.1
2.5±0.1
0.5±0.2
2.1±0.2
2.4±0.2
RBD
6.3±0.1
3.2±0.1
0.7±0.2
4.7±0.2
3.0±0.2
RBF
Type
L
W
L
1
L
2
W
1
W
2
W
3
T
Dimensions
RBH
7.5±0.1
6.0±0.1
1.4±0.2
4.4±0.2
1.4±0.2
0.7±0.2
3.6±0.2
1.5 max.
Land Pattern
1.05 max.
FIGURE 3—TEMPERATURE OF RESISTOR SURFACE
Temperature Measurement
(in still air)
T (°C)
80
70
Temperature Rise
60
50
40
30
20
10
0.5
RBD
RBF
RBH
Mounting
Board
Center of
Element Surface
(Glazed Epoxy Board)
RBD
RBF
RBH
R
R
R
= 42.8°C/W
= 38.0°C/W
= 46.2°C/W
Mounted on
Glazed Epoxy Board
(100 mm x 40 mm x 1.6 mmt)
Mounted on
Aluminum Board
(100 mm x 40 mm x 2.0 mmt)
1.0
Applied Power
1.5
(W)
Please use board made of metal for continuous use with 1.5W at 70°C. Please keep the temperature of board less than 90°C when
using the glazed epoxy board.
www.vishayfoilresistors.com
2
For questions, contact
foil@vishaypg.com
Document No.: 63238
Revision: 27-Mar-2013
A
RBD, RBF, RBH Series
Vishay Foil Resistors
TABLE 3—SPECIFICATIONS AND PERFORMANCES
Parameters
Maximum Rated Operating Temp.
Working Temperature Range
Thermal Shock
Overload
Low Temp. Storage and Operation
Substrate Bending Test
Dielectric Withstanding Voltage
Insulation Resistance
Resistance to Soldering Heat
Moisture Resistance
Shock
Vibration, High Frequency
Life
Storage Life
High Temperature Exposure
Test Condition
Typical
ΔR Limits
Maximum
ΔR Limits
70°C
–65°C to +155°C
–65°C/30 min.
↔
+155°C/30 min., 5 cycles
Rated Voltage x 2.5, 5 sec.
–65°C, No Load, 24 hrs.
↔
Rated Voltage, 45 min.
Substrate Bent 3 mm, 60 sec.
Atmo. Pres.: AC 200V, 1 min.
DC 100V, 1 min.
260°C, 10 sec.
+65°C to –10°C, 90% RH to 98% RH, Rated Voltage, 10 cycles (240 hrs.)
100G, 6 ms, Sawtooth Wave, X, Y, Z, each 10 shocks
20G, 10 Hz to 2,000 Hz to 10 Hz, 20 min., X, Y, Z, each 2.5 hrs.
70°C, Rated Power, 1.5 hr. – ON, 0.5 hr. – OFF, 2,000 hrs
15°C to 35°C, 15% RH to 75% RH, No Load, 10,000 hrs.
155°C, No Load, 2,000 hrs.
±0.03%
±0.03%
±0.05%
±0.05%
±0.01%
>10,000 MΩ
±0.03%
±0.03%
±0.01%
±0.01%
±0.05%
±0.01%
±0.05%
±0.1%
±0.1%
±0.1%
±0.1%
±0.05%
>10,000 MΩ
±0.1%
±0.1%
±0.05%
±0.05%
±0.1%
±0.05%
±0.1%
FIGURE 4—LOAD LIFE TEST
Load Life Test - RBF, 1Ω, n=10
70°C, Rated Power, 1.5 hr - ON, 0.5 hr - OFF, 2,000 hrs
100
80
60
40
20
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
FIGURE 5—LOW TEMPERATURE STORAGE
AND OPERATION
Low Temp. Storage and Operation
–65°C, No Load, 24 hrs
Rated Voltage, 45 min.
RBF, 100 mΩ n=20
16
14
12
14
R (ppm)
0
–20
–40
–60
–80
–100
Frequency
10
8
6
4
2
0
2
4
0
250
500
750
1000
1250
1500
1750
2000
-500
-300
-100
100
300
Time (hrs)
R (ppm)
FIGURE 6—THERMAL SHOCK
Thermal Shock
–65°C/30 min.
+155°C/30 min., 5 cycles
RBF, 70 mΩ n=40
25
23
FIGURE 7—VIBRATION, HIGH FREQUENCY
Vibration, High Frequency
20G, 10 Hz to 2,000 Hz to 10 Hz, 20 min
X, Y, Z, each 2.5 hrs
RBF, 100 mΩ n=10
10
20
8
Frequency
15
12
10
5
Frequency
6
6
4
4
5
2
-500
-400
-300
-200
-100
0
100
200
300
400
500
0
–500
–300
–100
100
300
R (ppm)
R (ppm)
Document No.: 63238
Revision: 27-Mar-2013
For questions, contact
foil@vishaypg.com
www.vishayfoilresistors.com
3
500
0
500
RBD, RBF, RBH Series
Vishay Foil Resistors
TABLE 4—GLOBAL PART NUMBER INFORMATION
(1)
NEW GLOBAL PART NUMBER: Y80510R00500J0L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
CHARACTERISTICS
0
= standard
9
= lead (Pb)-free
1 to 999
= custom
Y
8
0
(1)
5
1
0
R
0
0
5
0
0
J
0
L
PRODUCT CODE
8051
= RBD
8052 = RBF
8053 = RBH
RESISTANCE TOLERANCE
D
= ±0.5%
F
= ±1%
G
= ±2%
J
= ±5%
PACKAGING
L
= bulk
FOR EXAMPLE: ABOVE GLOBAL ORDER Y8051 0R00500 J 0 L:
TYPE: RBD
VALUE: 0.005Ω
ABSOLUTE TOLERANCE: ±5%
TERMINATION: standard
PACKAGING: bulk
HISTORICAL PART NUMBER: RBD 0R0050 J B
RBD
MODEL
RBD
RBF
RBH
0R0050
RESISTANCE VALUE
0.005Ω
J
TOLERANCE
D
= ±0.5%
F
= ±1%
G
= ±2%
J
= ±5%
B
PACKAGING
B
= bulk
Note
(1) For non-standard requests, please contact Application Engineering
www.vishayfoilresistors.com
4
For questions, contact
foil@vishaypg.com
Document No.: 63238
Revision: 27-Mar-2013
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and
conditions of purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision
Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and
all liability, including without limitation special, consequential or incidental damages, and (iii) any and
all implied warranties, including warranties of fitness for particular purpose, non-infringement and
merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different
applications and performance may vary over time. Statements regarding the suitability of products for
certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that
are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular
application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or
by any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly
indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay
Precision Group for any damages arising or resulting from such use or sale. Please contact authorized
Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for
such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-2011
www.vishaypg.com
1
京公网安备 11010802033920号
EEWORLD
