Ecliptek | EQRG12 Series Oscillator
http://www.ecliptek.com/oscillators/EQRG12/
Log On
| 714-433-1200 |
Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EQRG12 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) HCSL 2.5Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
2011/65 +
2015/863
168 SVHC
Revision C 06/26/2014
Electrical Specifications
Nominal Frequency
10.000MHz to 200.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability
Inclusive of all conditions: Calibration Tolerance (at 25°C), Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change, Output Load Change, First Year Aging at 25°C, Shock, and
Vibration
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
0°C to +70°C
-20°C to +70°C
-40°C to +85°C
±3ppm Maximum First Year
2.5V
DC
±5%
Without Load
30mA Maximum
580mV
DC
Minimum, 740mV
DC
Typical, 850mV
DC
Maximum
-150mV
DC
Minimum, 0mV
DC
Typical, 150mV
DC
Maximum
Measured at 50% of waveform
50 ±10(%)
50 ±5(%)
Measured at 0.175V
DC
to 0.525V
DC
of waveform
500pSec Maximum
600mV Minimum, 740mV Typical, 850mV Maximum
Between Output and Ground
50 Ohms
HCSL
Click to Open Phase Noise Table
Standby (on Pad 1)
Standby (on Pad 2)
70% of V
DD
Minimum or No Connect to Enable Output and
Complementary Output
30% of V
DD
Maximum to Disable Output and Complementary Output
(High Impedance)
10mSec Maximum
Operating Temperature Range
Aging at 25°C
Supply Voltage
Input Current
Output Voltage Logic High (V
OH
)
Output Voltage Logic Low (V
OL
)
Duty Cycle
Rise Time/Fall Time
Output Swing (dVOpp)
Load Drive Capability
Output Logic Type
Phase Noise
Output Control Function
Output Control Input Voltage Logic High
(Vih)
Output Control Input Voltage Logic Low
(Vil)
Standby Output Enable Time
1 of 12
28-Jan-2016 2:24 PM
Ecliptek | EQRG12 Series Oscillator
http://www.ecliptek.com/oscillators/EQRG12/
Standby Output Disable Time
Standby Current
200nSec Maximum
Without Load
10 A Maximum
Click to Open RMS Phase Jitter Table
0.2pSec Typical
1.0pSec Typical
1.5pSec Typical
40pSec Maximum
-55°C to +125°C
10mSec Maximum
RMS Phase Jitter
Period Jitter (Deterministic)
Period Jitter (Random)
Period Jitter (One Sigma)
Period Jitter (tp-p)
Storage Temperature Range
Start Up Time
2 of 12
28-Jan-2016 2:24 PM
Ecliptek | EQRG12 Series Oscillator
http://www.ecliptek.com/oscillators/EQRG12/
RMS Phase Jitter
Fj=12kHz to 20MHz (Random)
Nominal Frequency Range
10MHz to 50MHz
50.000001MHz to 99.999999MHz
100MHz to 200MHz
RMS Phase Jitter
600fSec Maximum
450fSec Maximum
200fSec Maximum
4 of 12
28-Jan-2016 2:24 PM
Ecliptek | EQRG12 Series Oscillator
http://www.ecliptek.com/oscillators/EQRG12/
Mechanical Dimensions
All Dimensions in Millimeters
Pin 1: No Connect Or Standby
Pin 2: No Connect Or Standby
Pin 3: Case/Ground
Pin 4: Output
Pin 5: Complementary Output
Pin 6: Supply Voltage
Marking Specifications
Line 1:
Line 2:
ECLIPTEK
XXXXXXM
XXXXXX = Nominal Frequency (5 digits + Decimal)
M = Frequency Unit of Measure (MHz)
XXXXX
XXXXX = Ecliptek Manufacturing Identifier
Line 3:
5 of 12
28-Jan-2016 2:24 PM