Leaded ResistoRs
Wirewound Resistors
High Power Type
Ultra Miniature Style [ PNP Series ]
FeatURes
Power Rating
Resistance Tolerance
T.C.R.
Flameproof Multi-layer Coating Meets
Flameproof Feature Meets Overload Test
1W, 2W, 3W, 4W
±1%, ±5%
±300ppm/°C
UL-94V-0
UL-1412
iNtRodUCtioN
The resistor element is a resistive wire which is
wound in a single layer on a ceramic rod, with
tinned connecting wires of electrolytic copper
welded to the end-caps. The ends of the
resistive wire and the leads are connected to
the caps by welding. The resistors are coated
with layers of green color flame-proof lacquer.
High power in small packages.
deRatiNG CURVe
For resistors operated in ambient temperatures above 70°C, power rating must be derated
in accordance with the curve below.
Rated Load (%)
70
100
80
60
40
20
50
100 150 200 250 300
200
275 °C
Ambient Temperature (°C)
diMeNsioNs
stYLe
Ultra Miniature
ød
H
L
th color code: violet
øD
PNP100
PNP200
PNP300
PNP400
diMeNsioN
L
6.3±0.5
9.0±0.5
11.5±1.0
15.5±1.0
ød
2.4±0.2
3.3±0.3
4.5±0.5
5.0±0.5
H
28±2.0
26±2.0
35±2.0
33±2.0
Unit: mm
ød
0.55±0.05
0.55±0.05
0.8±0.05
0.8±0.05
61
Note:
eLeCtRiCaL CHaRaCteRistiCs
stYLe
Power Rating at 70°C
Dielectric Withstanding Voltage
Resistance Range (±1%)
Resistance Range (±5%)
Operating Temp. Range
Temperature Coefficient
PNP100
1W
300V
0.22
Ω
- 130
Ω
0.1
Ω
- 130
Ω
-40°C to +200°C
±300ppm/°C
0.1
Ω
- 820
Ω
0.068
Ω
- 820
Ω
0.1
Ω
- 2.2K
Ω
0.025
Ω
- 2.2K
Ω
0.1
Ω
- 2.8K
Ω
0.03
Ω
- 2.8K
Ω
PNP200
2W
PNP300
3W
PNP400
4W
Note: Special value is available on request
eNViRoNMeNtaL CHaRaCteRistiCs
PeRFoRMaNCe test
Short Time Overload
Voltage Proof
Temperature Coefficient
Insulation Resistance
Solderability
Solvent Resistance of Marking
Robustness of Terminations
Damp Heat Steady State
Endurance at 70°C
Temperature Cycling
Resistance to Soldering Heat
Accidental Overload Test
test MetHod
IEC 60115-1 4.13
IEC 60115-1 4.7
IEC 60115-1 4.8
IEC 60115-1 4.6
IEC 60115-1 4.17
IEC 60115-1 4.30
IEC 60115-1 4.16
IEC 60115-1 4.24
IEC 60115-1 4.25
IEC 60115-1 4.19
IEC 60115-1 4.18
IEC 60115-1 4.26
10 times rated power for 5 Sec.
in V-block for 60 Sec., test voltage by type
-55°C to +155°C
in V-block for 60 Sec.
235±5°C for 3±0.5 Sec.
IPA for 5±0.5 Min. with ultrasonic
Direct load for 10 Sec. in the direction of the terminal leads
40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
-55°C
Room Temp.
+155°C
Room Temp. (5 cycles)
260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
4 times RCWV for 1 Min.
aPPRaise
±2.0%+0.05
Ω
By type
By type
>100M
Ω
95% Min. coverage
No deterioration of
coatings and markings
≥2.5kg (24.5N)
±5.0%+0.05
Ω
±5.0%+0.05
Ω
±1.0%+0.05
Ω
±1.0%+0.05
Ω
No evidence of flaming
or arcing
Note: Rated Continuous Working Voltage (RCWV) =
Power Rating x Resistance Value
GD32 MCU
京公网安备 11010802033920号
EEWORLD
