Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
The target files created by TI's new assembler and linker use a COFF (Common Object File Format), which is more conducive to modular programming and provides a powerful and flexible programming method...
The LSM6DS3 3D accelerometer and 3D gyroscope are system-in-packages that operate in 1.25mA (up to 1.6kHz ODR) high-performance mode. It features always-on low power consumption to provide you with th...
Cube MX 5.30 is the latest version. When reading and writing TF cards via SDIO, the mode is set to 4-bit. However, the generated c file is always in 1-bit mode. It's strange. Could it be that the 4-bi...
Preface:
Recently, EE held a disassembly expert event. The first episode was the disassembly of the charging head. I happened to be keen on disassembly, so I participated in this event. I don’t know m...
This is the details of debugging the RF amplifier that I personally tested in my project, system solution - structural design - module determination - layout - module verification - whole machine veri...
The embedded market is pressing for higher performance at lower power, a demand that is now extending to a wide range of portable and wall-powered applications. To meet this demand, Freescale has b...[Details]
introduction In the 21st century, mankind will face major challenges in achieving sustainable economic and social development. Under the dual constraints of limited resources and environmental prote...[Details]
On February 23, MWC Shanghai officially opened with the theme of "Harmony and Coexistence". Yang Jie, Chairman of China Mobile, pointed out in his opening keynote speech that the economy and society ...[Details]
AD6620 is a broadband IF to baseband demodulator. Its internal signal processing unit consists of four series units. They are frequency conversion unit, second-order fixed coefficient comb filter deci...[Details]
On the afternoon of October 28, the "China Green Company Alliance Roundtable Meeting· Xiaomi Station" was held at Xiaomi yesterday. Lei Jun, founder, chairman and CEO of Xiaomi , shared Xiaomi's m...[Details]
【Abstract】 A single-phase bridge type semi-controlled electroplating DC power supply with a single-chip microcomputer constant current device belongs to the application of single-chip microcomputer c...[Details]
Today, many telecommunications, data communications, electronic data processing, and especially wireless networking systems are powered by distributed power architectures. These complex systems req...[Details]
I took the course of intelligent robots last semester because of my passion for them, although I failed the course because I didn’t submit the assignments in time, o(︶︿︶)o (ps: teacher, if you see thi...[Details]
Lifespan is a key factor affecting the cost of using lithium-ion batteries, so major manufacturers have adopted various means to improve the service life of their own lithium-ion batteries. The servi...[Details]
Internet of Things (IoT) devices are being rapidly introduced into all markets, ranging from home appliances to medical devices to automobiles; manufacturers must stay ahead of competitors through co...[Details]
Introduction: The research on the fingerprint recognition system under Linux system, which is composed of FPI fingerprint recognition module, Raspberry Pi main control module and AVR module, and uses...[Details]
South Korea's Samsung Electronics recently announced that the company has begun mass production of 3-nanometer chips, making it the world's first company to mass-produce 3-nanometer chips. Samsung ...[Details]
The clamp ammeter is a portable instrument that can directly measure AC current without disconnecting the circuit. This instrument has low measurement accuracy and can provide a rough understanding o...[Details]
Motors are widely used in various fields of society and consume a lot of energy. How to improve motor efficiency and reduce motor energy consumption has become the direction of motor development. B...[Details]
Well-known semiconductor industry chain blogger @手机陶瓷达人's latest post said that TSMC will increase the price of wafer foundry next year, but according to the supply chain in Taiwan, China, TSMC's pri...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
