Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
Internal structure of single-chip microcomputer Single-chip microcomputer is an integrated circuit chip, which uses ultra-large-scale integrated circuit technology to integrate the central processing ...
What can be improved in this experimental circuit? The teacher said that we can try to improve it from potentiometers, RC series-parallel networks. This is my graduation project, physics, and I don't ...
When designing with high-speed amplifiers, it is important to be familiar with their general specifications and understand their specific concepts. In this article, high-speed amplifiers are operation...
This content is originally created by btty038 , a user of EEWORLD forum . If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source....
[i=s] This post was last edited by pomin on 2022-8-27 19:33 [/i] # [Home Smart Dashboard] Development and Construction of ESP-IDF under Linux > My laptop only has four cores, and compiling IDF is too ...
Security concerns of different IoT implementations, from low-power ISM networks like ZigBee and Thread to larger scale Wi-Fi networks. The IoT is growing, with many different wireless technologies and...
This week, Google released Android 11 Beta 3, a month after Beta 2.5. According to Google's arrangement, Beta 3 will be the last beta version, and the next one to be pushed will be the offi...[Details]
Standard factory buildings in the high-end equipment industrial park. Photo courtesy of the Publicity Department of the Jianyang Municipal Party Committee. The construction progress bar of the Chengdu...[Details]
"Are you still in touch with your friends in L4?"
Yuanrong Qixing CEO Zhou Guang did not give a direct answer.
Three years ago in Futian, Shenzhen, the Yuanrong Qixing Robotax...[Details]
What is a speed motor controller?
A speed motor controller is an electronic device used to control the speed and operating status of a speed motor. It achieves speed regulation and control of ...[Details]
According to TrendForce's Display Research Division, the sales of flagship smartphones in the first half of 2020 were lower than expected due to the pandemic, resulting in a lower share of AMOLED mod...[Details]
The previous article in the series "Diagnostic Test Development Based on ODX (1): ODX Database Analysis" briefly introduced the ODX file type and the hierarchical structure of each file. In this is...[Details]
Label: FDIV Function: Floating point division
Entry condition: dividend is in , divisor is in .
Exit information: when OV=0, quotient is still in , when OV=1, overflow.
Affected resources: PSW, A, ...[Details]
When I use LPC2378 serial port to query and send, there is data loss. The LPC2378 serial port has a 16-byte FIFO. When an array of character data (greater than 16 bytes) is queried and sent, only 1...[Details]
Abstract: This article introduces in detail a novel digital control method for PWM inverter power supply - adaptive repetitive control. The application of this method makes the system adaptive an...[Details]
What does the execution speed of a microcontroller depend on? Of course, for beginners, the first thing that comes to mind is the crystal oscillator. Yes, the crystal oscillator counts as one, but to...[Details]
Industry leaders and e-sports elites gather at Cyberport, digital entertainment development continues to flourish HONG KONG - Media OutReach - 10 December 2021 - The Digital Entertainment Leadershi...[Details]
ATmega88 is a low-power 8-bit CMOS microcontroller based on an enhanced AVR RISC structure. Due to its advanced instruction set and single-clock cycle instruction execution time, ATmega88 has a data ...[Details]
1. Pay attention to regular calibration and testing
Toxic and harmful gas detectors, like other analytical detection instruments, are measured by relative comparison methods: first, ...[Details]
The development of the flexible packaging industry has been rapid in recent years. At the same time, the quality problems that come with it have also become prominent. The number of complaints from us...[Details]
1. Definition of terms
Wireless Sensor Network (WSN) is a multi-hop self-organizing network system composed of a large number of cheap micro sensor nodes deployed in the monitoring area th...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
