LTV-85, LTV-86
Vertical Push Switch
●开关基本参数
额定负½½
½用环境温度
接触电阻
绝缘电阻
抗电强度
外壳材料
锁½行程
总行程
动触点
电路状态
按钮
操½力
0.10A 30VDC 100,000 cycles
1.00A 13VDC 20,000 cycles
-40ºC to 85ºC
50 mΩ max. initial
100 MΩ min.
500VAC for 60 +/- 5 sec
UL94 V-0 Thermoplastic
1.5mm
2.5mm
覆银接点
非短路
BF series caps
LED series caps
150 +/- 50gf
240 +/- 50gf
350 +/-100gf
450 +/-100gf
100 ~ 150gf
TONELUCK
Ordering Qty: 200pcs
●开关选型
LTV-85
- S
N
45
- A
S
产品类型
LTV-85 (2P2T)
LTV-86 (2P1T)
是否自锁
S= Self Lock
N= Momentary, No Latching function
端子类型
N, D, P, L, C
按挚高度
4.5, 5.7, 5.7B…
(Ref. to the table)
操½力
A = 150 +/- 50gf
B = 240 +/- 50gf
C = 350+/-100gf
D = 450+/-100gf
E = 100 ~150gf
是否加胶
S = Epoxy sealed base
N = Non-sealed base
A="1" printed, no pin, and non-sealed
B="2" printed, no pin, and seale
C="3" printed, no pin, and sealed
D=no pin, and non-sealed
E="0, 1, 2" printed, no pin, non-sealed
F=2 addtional pins, sealed
●开关电路及基本外½
2P2T
Position Pin (Ø 1.0mm)
Recommend P.C.B. Mounting Holes
2P1T
General tolerance:±0.05
www.toneluck.com
Page 1
LTV-85, LTV-86
Vertical Push Switch
●端子类型
Type N = Straight Terminals
(5.4mm pitch)
Type D = Snap-in Terminals
Type P = Straight Terminals
(6.0mm pitch)
TONELUCK
Type L = 7.5mm Terminals
Type C = Snap-in Terminals
●按挚类型
Actuator Types = 4.5
Actuator Types = 5.7
Actuator Types = 5.7B
Actuator Types = 6.5
Actuator Types = 6.5B
Actuator Types = 9.0
www.toneluck.com
Page 2
LTV-85, LTV-86
Vertical Push Switch
Actuator Types = 9.0B
Actuator Types = 9.5
Actuator Types = 11.25
TONELUCK
Actuator Types = 12.0
Actuator Types = 14.5
Actuator Types = 16.5
●开关正确½用方法及注意事项
1.不可½加强力反复操½,在按挚已经按下的情况下进一步加压的话,过大的负荷重量可½½弹簧的变½,导致动½不良。
2.开关不属于密封型开关,焊接时应避免焊剂及电路板上的异物进入开关内部½响开关性½。
3.焊接时包括手工修正焊接在内的再焊接,焊接的次数应在2次以下,第1次完至第2次½业之前应待其恢复常温后再进行,如持续加热将可½
导致外部½廓变½、性½受损。
4.为了防止端子部变色,请不要在高温、高湿、有腐蚀性气½的环境中存放,包装开封后,请½快进行½用,并且将剩½部件在防湿、无腐蚀
气½的环境中进行适½存放。
www.toneluck.com
Page 3