F-3106F 2/08
Index
General Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .. . . . . . .3-6
HIGH TEMPERATURE CERAMIC CAPACITORS
HT/HP - Standard Series - (+200°C) Ceramic Capacitors C0G (NP0), X7R Dielectric . . . . . . . . . . . .. . . . . . . . . . . . . . .7-9
HV-High Voltage Series - (+200°C) Ceramic Capacitors C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . .10-12
Ceramic Cased Capacitors C3 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13
SCR/SCA Standard Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .14-16
SRR/SRA Standard Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .14-16
ACR/ACA High Temperature (+200°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . .. . .17-19
ARR/ARA High Temperature (+200°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . .17-19
TCR/TCA High Temperature (+260°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . . . .20-22
TRR/TRA High Temperature (+260°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . .20-22
VCR - C3 High Temperature/High Voltage (+260°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric .
. . .23-25
VRR - C3 High Temperature/High Voltage (+260°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . .23-25
HIGH VOLTAGE CERAMIC CAPACITORS
HV Series, High Voltage, Radial Conformally Coated, C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . ..26-30
HV Series, High Voltage, Radial Conformally Coated, C0G (NP0) & X7R Dielectric (MIL-PRF-49467 Equivalent) . . . .31-33
HS Series, High Voltage, Radial Conformally Coated, Space Quality, C0G (NP0) & X7R Dielectric . . . . . . . . . . . . . ..34-38
High Voltage, Ceramic Chip Military Equivalent Tested - C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . .39-43
SM Series, High Voltage Surface Mount Ceramic Chip - C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . .44-48
D Series, High Voltage Surface Mount Ceramic Disc - C0G (NP0), X7R, X5U Dielectric . . . . . . . . . . . . . . . . .. . . . . .49-50
2
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
High Temperature, High Voltage
Performance Characteristics
GENERAL SPECIFICATIONS
Working Voltage:
C0G
50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k,
15k, 20k
X7R
50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k,
20k, 30k, 40k, 50k
X5U
3k, 4k, 5k, 7.5k, 10k, 15k, 20k
Temperature Characteristics:
C0G
0 + 30 PPM / °C from - 55°C to + 125°C (1)
X7R
+ 15% from - 55°C to + 125°C
X5U
+ 22%, -56% from -55°C to + 85°C
Capacitance Tolerance:
C0G
+0.5pF, +1%, +2%, +5%, +10%
X7R
±5%, ±10%, ±20%, +80% / -20%, +100% / -0%
X5U
±5%, ±10%, ±20%, +80% / -20%, +100% / -0%
Construction:
Epoxy encapsulated - meets flame test requirements
of UL Standard 94V-0.
High-temperature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Termination Material:
Check individual Series: Part Number and Ordering Information
for Termination Materials offered in each series.
Solderability:
MIL-STD 202, Method 208
(Test Method: ANSI/J-STD-002)
Test A for through-hole mount and surface mount leaded.
Test B for surface mount leadless components.
Terminal Strength:
MIL-STD 202, Method 208, Condition A (2.3kg or 5 lbs)
Resistance to Solvents:
MIL-STD 202, Method 215
Resistance to Soldering Heat:
MIL-STD 202, Method 210, Test Condition C
ENVIRONMENTAL
Vibration:
MIL-STD 202, Method 204, Condition D (20g)
Shock:
MIL-STD 202, Method 213, Condition I (100g)
Life Test:
MIL-STD 202, Method 108
<200V
C0G - 200% rated voltage @ +125°C
X7R - 200% rated voltage @ +125°C
>500V
C0G - rated voltage @ +125°C
X7R - rated voltage @ +125°C
X5U - rated voltage @ +85°C
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Moisture Resistance:
MIL-STD 202, Method 106
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Thermal Shock:
MIL-STD 202, Method 107, Condition A
C0G & X7R: -55°C to 125°C
X5U: -55°C to 85°C
(1)
(2)
+53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM
below 10pF.
X7R & X5U dielectrics exhibit aging characteristics;
therefore, it is highly recommended that capacitors be
deaged for 2 hours at 150°C and stabilized at room tem-
perature for 48 hours before capacitance measurements
are made.
ELECTRICAL
Capacitance @ 25°C:
Within specified tolerance and following test conditions per MIL-
STD 202, Method 305.
C0G, X7R & X5U
> 100pF with 1.0 vrms @ 1 kHz with 1.0 vrms
< 100pF with 1.0 vrms @ 1 MHz with 1.0 vrms
Dissipation Factor @ 25°C:
Same test conditions as capacitance.
C0G - 0.15% maximum
X7R - 2.5% maximum
X5U - 2.5% maximum
Insulation Resistance @25°C:
MIL-STD 202, Method 302
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Dielectric Withstanding Voltage:
MIL-STD 202, Method 301
<200V test @ 250% of rated voltage
500V to 1250V test @ 150% of rated voltage
>1251V test @ 120% of rated voltage
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
3
KEMET High Voltage Technical Summary
HIGH TEMPERATURE
MILITARY & AEROSPACE
Avionics
Radar Systems
Telemetry, Data Tx/Rx
Control Systems
MEDICAL
.5 to 1.5 Tesla MR1 &
NM1 Tuning Coils
1 to 3 Tesla MR1 Gradient
Coils & Magnetic Rings
CT-Scanner
Medical MRI
X-Ray Generator
SEMICONDUCTOR
RF Tuning Networks
RF Power Supplies
Semiconductor Manufacturing
SECURITY
Handheld Scanners
Intruder Detection Systems
Luggage Scanners
Metal/Explosive Detector
OTHER
LCD Backlight Inverter
Electric Ballast for CFL
Electric Ballast for Fluorescent Lamp
Measurement Equipment
Microwave/Convection Ovens
POWER SUPPLY
HV Power Supply
Power Station Equipment
Power Supply for Air Conditioner, Washing Machine
Inverter Power Supply-AC
TELECOM
Base Station Power amps
Broadcasting Equipment
MODEM
DAA Modem
xDSL Modem
LAN, Router, HUB, Switches
RF Power Amplifiers
INDUSTRIAL
Oil Rigging, Down Hole, Mining
X
X
X
X
X
X
X
X
X
X
X
X
HIGH VOLTAGE
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
KEMET High Voltage Technical Summary
ELECTRICAL
Voltage
Range
Capacitance
Range
Dissipation
Factor
ENVIRONMENTAL
Operating
Temperature Range
MECHANICAL
Configuration
CATALOG
See page(s)
for detail
HIGH VOLTAGE
Radial Conformally
Coated
Std
C0G/X7R: 500 to
10k VDC
C0G/X7R: 600 to 5k
VDC
C0G/X7R: 500 to
10k VDC
C0G:12 pF - .330μF
X7R: 220 pF - 5.6
μF
C0G: 12 pF - .68
μF
X7R: 27 pF - .47
μF
C0G/X7R: 560 pF -
2.20μF
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: -55°C to + 125°C
X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
Radial
6
Radial
5
Mil-PRF-49467
Equivalent
Space Quality
C0G/X7R: -55°C to + 125°C
Radial
7-10
Ceramic Surface Mount
Chip
C0G/X7R:
500 to 5k VDC
C0G: 12 pF- .10
μF
X7R: 270 pF -2.50
μF
C0G: 0.15% max
X7R: 2.5% max
C0G/X7R: -55°C to + 125°C
Chip
11-13
Military
14-16
Leaded Chips
J or L lead
Disc
C0G/X7R:
500 to 10k VDC
C0G/X5U: 3k to
20k VDC,
X7R:3k to 50k VDC
C0G/X7R/X5U: 5k
to 20k VDC
C0G: 12 pF-.330
μF
X7R: 220 pF-5.6 uF
C0G: 1.2 pF-236 pF
X7R: 10 p -7400 pF
X5U: 80 pF-17300 pF
C0G: 1.2 pF-141 pF
X7R: 37 pF-4400 pF
X5U: 80 pF-10400 pF
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G/X7R: -55°C to + 125°C
Leaded Chip
J or L Lead
17-19
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
Disc
Disc Stack
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
Disc Stack
20-21
HIGH TEMPERATURE
Hi Temp (HT/HP)
100 to 200 VDC
-C0G: 22 pF-.100
μF
X7R:1000 pF-1.0μF
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
-55°C to + 200°C
Axial/Radial
22-23
24-
25
Hi Temp Hi Volt (HV)
500 to 4000 VDC
C0G: 390 pF-.015
μF
X7R:1400 pF- .270
μF
-55°C to + 200°C
Radial
26-
27
Ceramic Cased Capacitor
Std 125°C
(SCR/SRR/SCA/SRA)
200°C
(ACR/ARR/ACA/ARA)
260°C
(TCR/TRR/TCA/TRA)
Hi Temp Hi Volt
(VCR/VRR)
50 to 200 VDC
C0G: 1.0 pF- .12
μF
X7R:100 pF- 6.8
μF
C0G: 1.0 pF- .12
μF
X7R:100 pF- 3.3
μF
50 to 100 VDC
C0G: 1.0 pF- .12
μF
X7R:100 pF- 3.3
μF
C0G: 10 pF-.056
μF
X7R:330 pF-1.2μF
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
-55°C to + 260°C
Axial/Radial
-55°C to + 125°C
Axial/Radial
50 to 100 VDC
-55°C to + 200°C
Axial/Radial
28-
31
32-
33
500 to 5000 VDC
-55°C to + 200°C
Radial
34-
35
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
5
京公网安备 11010802033920号
EEWORLD
