TM
Product Brief
Cortina Systems® IXF1104 4-Port 10/100/1000 Mbps Ethernet Media
Access Controller With System Packet Interface Level 3 (SPI-3)
Product Highlights
• Configurable on a per-port basis for 10/100/1000 Mbps Ethernet
• Includes flexible MAC, serializer/deserializer (SerDes), and Copper PHY interfaces for low cost connectivity
• Features 32 Kbytes of receive buffer and 10 Kbytes of transmit buffer for loss-less flow control of Jumbo Frames
• Flexible system interface supports 32-bit SPI-3 or 4x8-bit SPI-3 up to 133 MHz
Product Overview
The explosion of Internet Protocol (IP) traffic and the
proliferation of sophisticated applications are driving
the demand for greater network bandwidth inside and
outside the enterprise. This is pushing Ethernet to
higher speed and performance in the LAN and at the
same time extending Ethernet into new market
segments including wireless, broadband access, multi-
service switches, metro/core, and storage area
networks. This trend motivates networking equipment
suppliers to search for Ethernet building blocks that
can provide more reliable and cost-effective
communications solutions. To address this need,
Cortina Systems, Inc. (Cortina) offers the Cortina
Systems
®
IXF1104 4-Port 10/100/1000 Mbps Ethernet
Media Access Controller (MAC) with System Packet
Interface Level 3 (SPI-3) (IXF1104), a member of the
Cortina MAC family of communication building blocks.
The IXF1104 is a 4-port Gigabit Ethernet MAC that
provides an aggregate 4 Gbps system-level interface to
individual full-duplex 10/100/1000 and half-duplex
10/100 Ethernet MACs. The device features the
industry-standard System Packet Interface (SPI-3)
providing a high-performance interface to the IXP2400
network processor or to a switching ASIC.
The industry-standard Gigabit Media Independent
Interface (GMII) and Reduced Gigabit Media
Independent Interface (RGMII) provide the PHY
interface for copper connectivity. An integrated SerDes
provides a PHY interface for direct connection to optical
modules, helping reduce board real estate and system
cost.
The integrated LED controller, internal management
data input/output (MDIO) interface with auto-scan
capability, high port-count, and single CPU interface
enable the IXF1104 MAC to reduce the number of
components required for a non-blocking twisted-pair or
fiber-based Gigabit Ethernet solution. The combination
of high integration, flexibility, and loss-less flow control
capability make the IXF1104 MAC a highly cost-
effective solution for the deployment of high-speed
Ethernet capability in a variety of growing application
segments.
Product Applications
By providing a combination of MAC, SerDes, and
Copper PHY interfaces in a small footprint, the IXF1104
4-port 10/100/1000 Mbps Ethernet MAC provides a
highly integrated and flexible Ethernet building block to
help address the growing bandwidth requirements in a
wide range of applications. These include multiservice
switches, edge and MAN routers, DSLAMs, cable
modem termination system (CMTS), and wireless
infrastructure equipment.
Copyright © 2005 - 2008 Cortina Systems, Inc.
Product Brief Number: 251346-5.1
Features
• Four IEEE 802.3-compliant 10BASE-T/100BASE-
TX/1000BASE-TX MAC ports in 552 CBGA
package
• SPI-3 32-bit LVTTL interface supports 133-MHz
clock; features 32-bit MPHY mode, 4x8-bit SPHY
mode, and four independent 8-bit interfaces
supporting a single Ethernet port
• Supports four independent 10/100/1000 Mbps
full-duplex PHYs with GMII/RGMII interface
• Supports four independent 1000 Mbps full-
duplex fiber optics modules with SerDes
interface and integrated PCS layer
• Configurable 32/16/8-bit microprocessor
interface
• Internal 32 KB receive FIFO and 10 KB transmit
FIFO per channel
• Compliance with IEEE 802.3x standard PAUSE
command frames
• RMON statistics
• IEEE 802.3 Management Interface (MDIO)
• JTAG and boundary scan
• Broadcast, multicast, and unicast address
filtering
• Serial LED Interface
• Independent enable/disable of any port
• 0.18
μm
process technology (CMOS)
Environmental Specifications
• Operating range (Copper) -40 °C to 85 °C
• Operating range (Fiber) 0 °C to 70 °C
• Power (typical)
Benefits
• Offers high integration for low-cost connectivity
• Supports in-band management functions while still
supporting a data rate of 4 Gbps
• Enables easier routing to PHY devices. RGMII
provides connectivity using fewer pins than GMII
• Integration reduces cost, noise, and system
complexity
• Provides access to configuration and status
registers along with access to RMON statistics
• Allows non-blocking support for reception and
transmission of Jumbo Frames
• Supports automatic Layer 2 flow control
• Allows for remote monitoring of port activity
• Enables monitoring and control of each of four
connected devices
• Reduces system test time
• Supports flexible packet filtering
• Provides a simple interface to display system
status
• Provides flexibility in system design
• Lowers power consumption
• Enables operation in telco environment
• Enables commercial range operation
• ~5 W
Cortina in Communications
Cortina is a leading supplier of intelligent
communication solutions through continuous
innovations in advanced port processing and intelligent
port connectivity to the Core, Metro, Access and
Enterprise Market Segments. With our state-of-the-art
high speed analog digital integration, we deliver a wide
suite of products that address our customers’
performance, density and flexibility needs enabling
faster time-to-market, longer time-in-market, and
increased revenue opportunities. Working closely with
our customers to understand their system requirements
and anticipate their needs, we are creating the
foundation ingredients for new generations of services.
*Other names and brands may be claimed as the property of others.
TM
Cortina Systems, Inc.
840 W California Ave.
Sunnyvale, CA 94086
408-481-2300
sales@cortina-systems.com
www.cortina-systems.com
Product Brief Number: 251346-5.1
Copyright © 2005 - 2008 Cortina Systems, Inc.
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
