Z201LT213R00CB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> The resistor> Z201LT213R00CB

Z201LT213R00CB: DescriptionFixed Resistor, Metal Foil, 0.6W, 213ohm, 300V, 0.25% +/-Tol, -.2,.2ppm/Cel, 3011,; CategoryPassive components The resistor; File Size2MB，8 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Z201LT213R00CB Overview

Fixed Resistor, Metal Foil, 0.6W, 213ohm, 300V, 0.25% +/-Tol, -.2,.2ppm/Cel, 3011,

Z201LT213R00CB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	861190658
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Rectangular
Lead diameter	0.644 mm
Lead length	25.4 mm
lead spacing	5.08 mm
Number of terminals	2
Maximum operating temperature	175 °C
Minimum operating temperature	-55 °C
Package height	8.28 mm
Package length	7.62 mm
Package shape	RECTANGULAR PACKAGE
Package form	Radial
Package width	2.67 mm
method of packing	Bulk
Rated power dissipation(P)	0.6 W
resistance	213 Ω
Resistor type	FIXED RESISTOR
series	Z201
size code	3011
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Tolerance	0.25%
Operating Voltage	300 V

Preview

Download Datasheet

View All

Z Series (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Z-Foil Though-Hole Resistor

with TCR of ± 0.05 ppm/°C, Tolerance of ± 0.005 % (50 ppm),

Load Life Stability of ± 0.005 %

FEATURES



Temperature coefficient of resistance (TCR):

- ± 0.05 ppm/°C nominal (0 °C to + 60 °C)

- ± 0.2 ppm/°C nominal (- 55 °C to + 125 °C,

+ 25 °C ref.) (see table 1)



Rated power: to 1 W at + 125 °C (see table 2)



Resistance tolerance: to ± 0.005 % (50 ppm)



Load life stability: ± 0.005 % at 70 °C, 2000 h or ±0.015%

at 70°C,10000 h (see table 4)



Resistance range: 5

to

600 k



Vishay Foil Resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)



Total accumulated change in resistance over life (EOL)

or Total Error Budget < 0.1 % (or better with PMO)**



Electrostatic discharge up to 25 000 V



Non-inductive, non-capacitive design



Rise time: 1 ns effectively no ringing



Current noise:

≤

0.010 µV

RMS

/V of applied voltage (< - 40

dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Low inductance: < 0.08 µH typical



Thermal stabilization time < 1 s (to reach within 10 ppm of

steady state value)



Pattern design minimizing hot spots



Terminal finish: lead (Pb)-free or tin/lead alloy



Matched sets are available per request



(TCR tracking: to 0.5 ppm/°C)



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

INTRODUCTION

The Bulk Metal

Foil resistor is based on a special

thermo-metalic stress concept wherein a proprietary bulk

metal cold rolled foil is cemented to a ceramic substrate. It is

then photoetched into a resistive pattern. Then it is laser

adjusted to any desired value and tolerance. Because the

metals used are not drawn, wound or mistreated in any way

during manufacturing process, the Bulk Metal Foil resistor

maintains all its design, physical and electrical

characteristics while winding of wire or sputtering does not.

Z foil resistors achieve maximum stability and near-zero

TCR. These performance characteristics are built-in for

every unit, and do not rely on screening or other artificial

means for uniform performance.

The stability of a resistor depends primarily on its history of

exposures to temperature. Stability is affected by:

1. Reversible changes in the ambient temperature and heat

from adjacent components (defined by the Temperature

Coefficient of Resistance, or TCR)

2. Short-term steady-state self-heating (defined by Power

TCR or PCR)

3. Irreversible destabilizing shock of suddenly-applied

power

4. Long-term exposure to applied power (load-life stability)

5. Repetitive stresses from being switched on and off

In very high-precision resistors, these effects must be taken

into account to achieve high stability with changes in load

(Joule Effect) and ambient temperature.

Vishay Foil Resistors’ new Z-Foil technology provides an

order of magnitude reduction in the Bulk Metal Foil

element’s sensitivity to temperature changes - both external

and internal. This technology provides TCR of

± 0.05 ppm/°C nominal (instrument range: 0 °C to +60 °C),

± 0.2 ppm/°C nominal (military range: - 55 °C to + 125 °C,

+ 25 °C ref), and a PCR of 5 ppm at rated power.

In order to take full advantage of this TCR improvement, it is

necessary to take into account the differences in the

resistor’s response to each of the above-mentioned effects.

The Z series has been developed to successfully deal with

these factors.

TABLE 1 - NOMINAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

VALUE

100



to 600 K



to < 100



to < 80



to < 50



to < 25



to < 10



STANDARD

TOLERANCE

± 0.005 %

± 0.01 %

± 0.02 %

± 0.05 %

NOMINAL TCR AND

MAX. SPREAD

(ppm/°C)

± 0.2 ± 0.6

± 0.2 ± 0.8

± 0.2 ± 1.0

± 0.2 ± 1.3

± 0.2 ± 1.6

± 0.2 ± 2.3

* Pb containing terminations are not RoHS compliant, exemptions may apply

** See PMO page 5

Document Number: 63187

Revision: 22-Oct-13

For any questions, contact:

foil@vishaypg.com

www.vishayfoilresistors.com

Recommended Resources

In response to the increasing number of new series of power modules for automotive traction inverters, do you know?

Photosensitive automatic dimming desk lamp design circuit diagram

STK0070II power amplifier circuit diagram

Haier M0-2270M1/M0-2270M2 microwave oven circuit diagram

General frequency converter external relay forward control

555 multi-purpose proportional controller circuit

When debugging a program in KEIL5, why can't F10 and F11 go down when the program runs to WHILE(1)?: [i=s]This post was last edited by Yishayishi on 2022-5-25 10:46[/i]When simulating and debugging a program in KEIL5, why can't F10 and F11 execute the program in the WHILE{} brackets when the program ...; 一沙一世 stm32/stm8

How much interference do batteries cause to radio waves?: Recently, there is such a situation. When the Bluetooth headset and the car key are placed in the same pocket, the keyless entry is very insensitive. However, the Bluetooth headset and the key have be...; wangerxian RF/Wirelessly

[EETALk] What knowledge do I need to master as a Bluetooth engineer?: As a Bluetooth engineer, what are the general job functions? ? ? What knowledge do you need to master??? Is there any Bluetooth engineer in this forum? Or maybe you are working on Bluetooth, or more b...; okhxyyo RF/Wirelessly

Interconnecting automotive 48V and 12V rails in dual-battery systems: The electrification of the automotive industry is developing at an ever-increasing pace, driven primarily by government regulations to reduce carbon dioxide (CO2) emissions. The European Union has set...; qwqwqw2088 Analogue and Mixed Signal

Do I need to draw a system architecture diagram before designing a digital circuit using Verilog?: I've been learning FPGA recently. The tutorial that comes with the development board I bought is only in PDF version. Moreover, there are only a few text explanations in the document tutorial, and the...; lingking FPGA/CPLD

The difference between new energy buses and passenger cars in terms of BMS structure: [i=s]This post was last edited by qwqwqw2088 on 2021-1-14 09:05[/i]The article I want to share below mainly introduces the differences between the battery and BMS structure of new energy buses and pas...; qwqwqw2088 TI Technology Forum

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components