M24308/23-34F datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The connector> The connector> M24308/23-34F

M24308/23-34F: Descriptiondsub 37pos socket; CategoryThe connector The connector; File Size503KB，41 Pages; ManufacturerITT; Websitehttp://www.ittcannon.com/

Download Datasheet Parametric View All

M24308/23-34F Overview

dsub 37pos socket

M24308/23-34F Parametric

Parameter Name	Attribute value
Maker	ITT
Reach Compliance Code	compli
ECCN code	EAR99
Factory Lead Time	10 weeks
Other features	STANDARD: MIL-DTL-24308, POLARIZED
body width	0.509 inch
subject depth	0.395 inch
body length	2.744 inch
Body/casing type	RECEPTACLE
Connector type	D SUBMINIATURE CONNECTOR
Contact to complete cooperation	NOT SPECIFIED
Contact point gender	FEMALE
contact mode	STAGGERED
Contact style	RND PIN-SKT
DIN compliance	NO
empty shell	NO
Filter function	NO
IEC compliance	NO
MIL compliance	YES
Plug contact pitch	0.109 inch
Match contact row spacing	0.112 inch
Plug information	MULTIPLE MATING PARTS AVAILABLE
Mixed contacts	NO
Installation option 1	HOLE .115-.125
Installation method	RIGHT ANGLE
Installation type	BOARD AND PANEL
PCB row number	2
Number of rows loaded	2
Options	GENERAL PURPOSE
Housing size	4/C
Termination type	SOLDER
Total number of contacts	37

Preview

Download Datasheet

View All

INCH-POUND

MIL-DTL-24308G

w/AMENDMENT 2

1 August 2012

SUPERSEDING

MIL-DTL-24308G

w/AMENDMENT 1

25 January 2011

DETAIL SPECIFICATION

CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL,

MINIATURE, POLARIZED SHELL, RACK AND PANEL,

GENERAL SPECIFICATION FOR

This specification is approved for use by all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the requirements for nonenvironmental, polarized shell, miniature, rack and

panel connectors having pin and socket, crimp (removable), solder (nonremovable), or insulation displacement

(nonremovable) contacts with rigid or float mounting, designed for -55°C to +125°C operating temperature range.

1.2 Part or Identifying Number (PIN). The PIN is to consist of the letter "M", the basic number of the specification

sheet, an assigned dash number and a suffix letter for the finish if applicable (see

3.1):

Military designation

24308/1

Specification

sheet number

-1

Dash number

Finish (see note 1)

For class G:

A = Pure electrodeposited aluminum.

F = Cadmium (see note 2).

K = Zinc nickel.

T = Nickel Fluorocarbon Polymer.

Z = Zinc (see note 3).

For class N:

A = Pure electrodeposited aluminum.

F = Cadmium (see note 2).

K = Zinc nickel

T = Nickel Fluorocarbon Polymer.

P = Passivated stainless steel.

Z = Zinc (see note 3).

For class H:

Class H connectors have a tin finish, no suffix required

For class M:

Class M connectors have a gold finish,

no suffix is required.

For classes D and K:

Class D and class K connectors have a nickel.

finish, no suffix is required.

NOTES:

1. Prior to 1 July 1987, a suffix for finish was not included in the PIN.

2. A “F” suffix PIN is to be used for connectors with a cadmium finish and made after 1 July 1987.

3. Manufactures and their selling agents and distributors may ship stock of “No Suffix” zinc finished connectors

no more than 6 months from the date of this document.

Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime,

ATTN: VAI, P.O. Box 3990, Columbus, OH 43218-3990 or email

RectangularConnector@dla.mil

Since

contact information can change, you may want to verify the currency of this address information using the

ASSIST Online database at

https://assist.dla.mil/.

AMSC N/A

FSC 5935

MIL-DTL-24308G

w/AMENDMENT 2

1.3 Classification.

1.3.1 Classes. Connectors covered by this specification are of the following classes.

General purpose connectors, see

3.3.6.1

(see note).

Nonmagnetic connectors, see

3.3.6.1

(see note).

Hermetic connectors.

Same as N except, these connectors are intended for space missions.

Same as G except, these connectors are intended for space missions.

Same as H except, these connectors are intended for space missions.

1.3.2 Style of termination. Connectors covered by this specification are of the following terminal styles:

Crimp

Solder

Insulation displacement contact (IDC)

Printed wiring board (PWB)

1.3.3 Types. Connectors covered by this specification are of the following types:

I - Standard density (size 20 contacts).

II - High density (size 22D contacts).

III - Standard density (size 20 IDC contacts)

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document users

are cautioned that they must meet all specified requirements documents cited in sections 3, 4, or 5 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-C-22520/2

- Crimping tools, Terminal, Hand, Wire Termination for wire barrel sizes 20 through 28

MIL-DTL-24308/23 - Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell,

Rack and Panel, Socket Contacts, Printed Wiring Board Termination Types

MIL-DTL-24308/24 - Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell,

Rack and Panel, Pin Contacts, Printed Wiring Board Termination Types

MIL-DTL-83488

- Coating, Aluminum, High Purity

MIL-M-24519

- Molding Plastics, Electrical Thermoplastic

MIL-DTL-24308G

w/AMENDMENT 2

SOCIETY OF AUTOMOTIVE ENGINEERS, INC.

SAE AMS2404

SAE AMS2700

SAE AMS-QQ-N-290

SAE AMS-QQ-P-416

SAE AMS-P-81728

- Plating, Electroless Nickel

- Passivation of corrosion resistant steel

- Nickel Plating (Electrodeposited)

- Plating, Cadmium (Electrodeposited)

- Plating, Tin-Lead (Electrodeposited)

(Copies of these documents are available online at

http://www.sae.org

or from SAE International,

400 Commonwealth Drive, Warrandale, PA 15096-0001, and Tel: 877-606-7323 [inside USA and Canada] or

724-776-4970 [outside USA], email at

CustomerService@sae.org.)

2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the

text of this document and the references cited herein (except for related specification sheets), the text of this document

takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific

exemption has been obtained.

3. REQUIREMENTS

3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the

applicable specification sheet. In the event of any conflict between the requirements of this specification and the

specification sheet, the latter shall govern.

3.2 Qualification. Connector assemblies furnished under this specification shall be products that are authorized by

the qualifying activity for listing on the applicable qualified products list before contract award (see

4.3

and

6.3).

3.2.1 Quality.

3.2.1.1 Statistical process control (SPC). The contractor shall implement and use statistical process control

techniques in the manufacturing process for parts covered by this specification. The SPC program shall be developed

and maintained in accordance with EIA-557. Where SPC cannot be utilized because of non-continuous production

requirements, a lot sampling plan for inspection in accordance with

table XIII

with c = 0 can be utilized. The SPC and

c = 0 programs shall be documented and maintained as part of the overall reliability assurance program in accordance

with EIA-557 and MIL-STD-790. Evidence of such compliance shall be verified by the qualifying activity of this

specification as a prerequisite for qualification.

3.3 Materials. Materials shall be as identified herein. However, when a definite material is not specified, a material

shall be used which will enable the connectors to meet all requirements of this specification. Acceptance or approval

of any constituent material shall not be construed as a guarantee for acceptance of the finished product.

3.3.1 Interface materials, platings and processes. Interface materials, platings, and processes have been

established to provide assurances that connectors manufactured to this specification will properly interface to similar

industry standard or government specified connector systems without problems of electrochemical incompatibility or

excessive interface surface wear. The manufacturers of connectors supplied to this specification may be allowed to

use alternate recognized industry standard materials, platings, and processes from those identified in

3.3.

Alternate

materials, platings and processes used must be coordinated with the qualifying activity as part of the qualification

process. Use of alternates to those referenced guidance items by the supplier must not result in inferior short or long

term performance or reliability of supplied connectors as compared with connectors manufactured using the

referenced materials, platings, or processes. Short or long term failures or reliability problems due to use of these

alternates shall be the responsibility of the supplier.

3.3.2 Dissimilar metals. When dissimilar metals are employed in intimate contact with each other, protection

against electrolytic corrosion shall be provided (see

3.3.1).

3.3.3 Nonmagnetic materials (classes M and N connectors). All parts used in classes M and N connectors shall be

made from materials which are classed as nonmagnetic (see

3.5.1).

Recommended Resources

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components