A006 LuxStrip II 6 Line
12 in. LED Light Engine with Driver
DATA SHEET Page 1 of 6
TM
Product Overview
The LuxStrip II A006 is a powerful compact light engine built on a Printed Circuit Board (PCB) and thermally
engineered to accommodate high brightness LEDs. Utilizing “driver on board” technology allows the entire unit to
easily be integrated into fixtures where space is at a premium. The LuxStrip II is a perfect solution for applications
such as general lighting, fluorescent replacement, sign, channel letters, and architectural lighting. As a standard
offering at 12", the LuxStrip II comes with up to six CREE® XP-E or XP-G* devices. Strips can be cut to specific lengths,
as short as 4". The strips are designed to interconnect to allow for varying lengths, and can be deployed in lengths
up to 12 feet. Optics are available for directional lighting. Standard optical options are 5º, 8º, and 20º. Other
options may be added to suit custom applications.
Unlike
traditional PCBs, the driver for the LuxStrip II is conveniently contained on board, allowing power supplies
which deliver a fixed voltage to be used.
An industry standard 24VDC power supply is ideal for use with LuxStrip II.
This is due to the
use of a LUXdrive series power module, which allows for a fixed voltage input while maintaining
a true, constant-current regulated output for the LEDs.
Power and dimming control voltage is connected via a low
profile board-to-board connector at the end of the strip, and utilizes a unique polarized connection for goof proof
assembly. Several strips can be stacked/attached together upto 12 feet typical. “Stub” sections can be shortened
at 2” increments to fit any length requirement.
* - Units can be customized for other LEDs or redesigned for OEM applications - Contact LUXdrive for more information
in
Made
in
the
USA
Features
Designed to operate on 24VDC
On board driver provides constant current
12” x .95”, cuttable every 2”, min length 4”
Easily joined for up to 12 feet length
ar
im
Fits the Dialight 22mm optics (OPXP-1-xxxx)
Pr
el
0 to 100% dimming w/signal pass-through
Works with 0-10V Dimmers, Lutron Nova T
®
Polarized connections - No Goofs
Compatible with CREE
®
XP-E, and XP-G
y
Typical Applications
Line lighting and wall wash
Automotive, RV & Marine Lighting
Tight space and cove lighting
Point of Purchase Lighting
Desk & Reading Lamps
Fluorescent replacement fixtures
Cabinet & Display Case Lighting
Sign & Channel Letters
Series configuration eliminates current hogging
Figure 1
(6) CREE XP-G LEDs in series
(V IN= 24VDC) and end-feeding another strip
Pb
RoHS
C o m p lia n t
2002/95/EC
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specifications subject to change without notice. Dec., 2010 - Rev 1.1
A006 LuxStrip II 6 Line
12 in. LED Light Engine with Driver
DATA SHEET Page 2 of 6
TM
Luminous Flux
Type
Table 1
Typical Luminous Flux at LED Junction Temperature of 25˚C
Part Number
A006-GW750-35
A006-GW750-70
A006-GW740-35
A006-GW740-70
A006-GW830-35
A006-GW830-70
A006-EW750-35
A006-EW750-70
A006-EW740-35
A006-EW740-70
A006-EW830-35
A006-EW830-70
Color
5000K White
5000K White
4000K White
4000K White
3000K White
3000K White
5000K White
5000K White
4000K White
4000K White
3000K White
3000K White
Drive Current
in (mA)
Luminous
Flux
CRI
Continuous
lengh (feet)
Power Consumption
(per foot)
350
700
350
700
350
700
350
700
350
700
350
700
700 typ
1270 typ
700 typ
1270 typ
630 typ
1080 typ
630 typ
1080 typ
630 typ
1080 typ
450 typ
810 typ
75 typ
75 typ
75 typ
75 typ
80 typ
80 typ
75 typ
75 typ
75 typ
75 typ
80 typ
80 typ
12 max
8 max
12 max
8 max
12 max
8 max
12 max
8 max
12 max
8 max
12 max
8 max
7W
15W
7W
15W
7W
15W
7W
15W
7W
15W
7W
15W
Cree XP-G
Part Number Identification
The part number is explaned below:
A006- A B C DD - EE
Where:
A006
A
B
C
DD
EE
Thermal Resistance (LED junctions to bottom of PCB)
LuxStrip II with XP-G LEDs in white 2.5° C/W
Operating Temperature (T
opr
)................... -40° to 100°C
3
LED junction temperature must be kept within manufacturers limits. See
CREE® XP-E, XP-G data sheets for more details
3
Pr
el
FR4 board temperature
designates the LUXdrive Product ID for a LuxStrip II board
designates LED Type (G for XP-G, E for XP-E, C for XP-C)
designates LED color (W= White)
designates CRI value (7= 75typ, 8=80 typ, 0 for direct color variants)
designates Color Variant (30=3000K
White, 40=4000K White, 50=5000K White)
designates Drive Current (35=350mA,
70=700mA)
im
Made
in
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
in
the
USA
Notes for Table 1:
1. Custom units available upon request, restrictions apply. Contact LUXdrive for additional details.
2. See CREE® XP-E, and XP-G data sheets for more details.
ar
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specifications subject to change without notice. Dec., 2010 - Rev 1.1
y
Cree XP-E
A006 LuxStrip II 6 Line
12 in. LED Light Engine with Driver
DATA SHEET Page 3 of 6
TM
Heat Sinking and Mounting
The LuxStrip II has five mounting points for #4, or #6 screws used with fiber or nylon washers. These screw
holes are provided to allow secure connection to the heat sink. Thermal epoxy, or double-sided thermal tape may
be used for speedy and easy assembly. The LuxStrip II should be attached to additional heat sink for proper
thermal management. At minimum, a heat sink of a metal plate (copper or aluminum), attched using a thermal
interface material
(such as LUXdrive A006-TAT),
should be used to increase the area exposed to free air. The
LuxStrip II FR4 Printed Circuit Board has a backing plate that is electrically isolated from the emitter. It is not
necessary to use an electrically insulating thermal interface material.
Table 2
Part Number
A006-TAT
Description
Thermal Adhesive
Number of
Feet
Compatible With
A006
180
Connection Diagram
1
2
3
4
5
6
1
2
3
4
5
6
- GND
- V+
- Dim
- Dim
- V+
- GND
Pr
el
Figure 2
LuxStrip II wiring diagram
im
in
Made
in
the
USA
There are two different types of wiring connectors available
for the LuxStrip II. Both connectors are 24.1mm (0.95”) wide
and 19.1mm (0.75”) long. The A006-HE which has four wires,
two wires for power in and two wires for dimming, and the
A006-HN which has 2 wires for power in. Also available are
the Barrel Plug connectors A006-PE and A006-PN. Both Barrel
Plug connectors feature a 2.5mm center positive plug. The
A006-PE has dimming wires while the A006-PN does not.
Both Barrel Plug solutions offer solderless setup of the
system.
Custom connectors available upon request, restrictions apply. Contact LUXdrive for additional details.
ar
Figure 3
A006-PN
Figure 4
A006-HE
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specifications subject to change without notice. Dec., 2010 - Rev 1.1
y
A006 LuxStrip II 6 Line
12 in. LED Light Engine with Driver
DATA SHEET Page 4 of 6
TM
Configuration
To be able to fit lengths of less than 12", the LuxStrip II can be trimmed as necessary. This method is called "stub",
where the unpowered end of the strip is cut to fit the fixture or extrusion. A common hacksaw and soldering iron
is all that is required to allow for field modification of the strips to accommodate custom installations. Jumper
pads are available at each cut point to shorten the electrical length of each string. Simply jump the pad that is
located before the cut. The remaining LEDs will get the proper current and voltage since they have their own
driver. As the length of the LuxStrip II is reduced, the minimum voltage to power the unit is also reduced. Using
this approach, here are the possible lengths:
Length
305mm (12”)
254mm (10”)
Number of LEDs
6
5
4
3
2
Figure 5
Typical “stub” strip cut lengths and results
in
a
the
USA
ry
+V
203mm (8”)
152mm (6”)
102mm (4”)
+V
im
LUXdrive
LED Driver
D1 D2 D3 D4 D5 D6
Dim
Dim
GND
Pr
el
GND
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Figure 6
Electrical equivalent of LuxStrip II
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specifications subject to change without notice. Dec., 2010 - Rev 1.1
Made
in
A006 LuxStrip II 6 Line
12 in. LED Light Engine with Driver
DATA SHEET Page 5 of 6
TM
Optics
The LuxStrip II can be fitted with many different optics from the major optics manufacturers. Dialight optics, also
offered by LUXdrive, offer five different illumination patterns: spot (5°), frosted spot (7°), medium(8°), wide(20°),
and oval (8° x 25°) (Note that LED type and color will have a slight effect on illumination pattern, e.g., non-white
LEDs give a narrower distribution). See the Dialight CREE™ XP® ADHESIVE-BACKED LENS SYSTEM" data sheet for
more information, including typical light distribution patterns.
Table 3
TYPE
Part Number
L2-OPXP-1-SPOT
L2-OPXP-1-SDIF
Description
Spot Base Module
Frosted Spot Base Module
Medium Base Module
Wide Frosted Base Module
Oval Base Module
Number of
LEDs
Half Width
Viewing Angle
Compatible With
1
1
1
1
1
5°
7°
8°
20°
8° x 25°
A006
A006
A006
A006
A006
LuxStrip II
L2-OPXP-1-MED
L2-OPXP-1-WIDE
L2-OPXP-1-OVAL
in
ar
y
8°
.43M (1.4ft.)
20 °
5°
.27M (0.9ft.)
1.1M (3.6ft.)
im
1.5M (5ft.)
1.5M (5ft.)
1.5M (5ft.)
5°
8°
20 °
Pr
el
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Figure 7
standard illumination patterns available,
and approximate difusion at 1.5M (5ft.)
Figure 8
LuxStrip II with optics.
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specifications subject to change without notice. Dec., 2010 - Rev 1.1
Made
in
the
USA
京公网安备 11010802033920号
EEWORLD
