CA
Vishay Dale
Wirewound Resistors, Commercial Power, Axial Lead
FEATURES
• High performance for low cost
• Auto insertable
• CA0001, CA0002 and CA5000 models are
supplied with a high temperature silicone
coating for additional environmental protection
• Lead forming available
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
Kitchen appliances: Percolators, blenders,
mixers, ranges, toasters, deep fryers.
Entertainment devices: Radios, televisions,
computers and power supplies.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
(1)
HISTORICAL MODEL
(1)
CA0001
CA-1
CA0002
CA-2
CA4000
CA-4xxx
CA5000
CA-5xxx
Note
(1)
CA4000 and CA5000 model numbers are calculated from the CA4000 power rating of 4 W per inch and CA5000 power rating of 5 W per
inch. The last three digits of the model number are the body length of the resistor in inches (decimal is between the first and second digit).
Example: CA5150 = 1.50 inches x 5 W per inch = 7.5 W.
POWER RATING
P
25 °C
W
1.0
2.0
2.0 to 8.8
2.5 to 11.0
RESISTANCE RANGE
0.1 to 1K
0.1 to 2.4K
0.1 to 1.02K
0.1 to 7K
TOLERANCE
±%
5, 10
5, 10
5, 10
5, 10
WEIGHT (typical)
g
0.65
0.80
See below
See below
EXAMPLES
GLOBAL MODEL
CA4050/CA5050
CA4055/CA5055
CA4060/CA5060
CA4070/CA5070
CA4080/CA5080
CA4090/CA5090
CA4100/CA5100
CA4150/CA5150
CA4200/CA5200
CA4220/CA5220
HISTORICAL MODEL
CA-4050/CA-5050
CA-4055/CA-5055
CA-4060/CA-5060
CA-4070/CA-5070
CA-4080/CA-5080
CA-4090/CA-5090
CA-4100/CA-5100
CA-4150/CA-5150
CA-4200/CA-5200
CA-4220/CA-5220
POWER RATING
P
25 °C
W
2.0/2.5
2.2/2.75
2.4/3.0
2.8/3.5
3.2/4.0
3.6/4.5
4.0/5.0
6.0/7.5
8.0/10.0
8.8/11.0
RESISTANCE RANGE
0.1 to 170/0.1 to 2.7K
0.1 to 195/0.1 to 3.1K
0.1 to 220/0.1 to 3.5K
0.1 to 270/0.1 to 4.3K
0.1 to 320/0.1 to 5.1K
0.1 to 370/0.1 to 5.9K
0.15 to 420/0.15 to 6.7K
0.2 to 630/0.2 to 7K
0.2 to 920/0.2 to 7K
0.2 to 1.02K/0.2 to 7K
TOLERANCE
±%
5, 10
5, 10
5, 10
5, 10
5, 10
5, 10
5, 10
5, 10
5, 10
5, 10
WEIGHT (typical)
g
0.64/0.78
0.65/0.80
0.66/0.82
0.68/0.86
0.70/0.90
0.72/0.94
0.74/0.98
0.84/1.19
0.94/1.40
0.98/1.48
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CA RESISTOR CHARACTERISTICS
Temperature Coefficient
ppm/°C
± 300 1
and above, ± 600 below 1
Short Time Overload
-
5 x rated power for 5 s
Maximum Working Voltage
V
(P x
R)
1/2
Dielectric Withstanding Voltage
V
AC
600 (CA0001, CA0002 and CA5xxx only)
Operating Temperature Range
°C
- 65 to + 275
Terminal Strength (minimum)
lb
10
Note
• Wirewound CA resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and resistive
functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using the e-mail
address at the bottom of this page for design assistance.
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CA000150R00JR05
C
A
0
0
0
1
5
0
R
0
0
J
R
0
5
SPECIAL
(Dash Number)
(up to 3 digits)
From
1 to 999
as applicable
R05
PACKAGING
GLOBAL MODEL
VALUE
TOLERANCE
PACKAGING
(See Standard
R
= Decimal
H
= ± 3.0 %
E14
= Lead (Pb)-free bulk
Electrical Specifications
K
= Thousand
J
= ± 5.0 %
E05
= Lead (Pb)-free tape and reel
Global Model
R1500
= 0.15
K
= ± 10.0 %
B14
= Tin/lead bulk
column for options)
1K500
= 1500
R05
= Tin/lead tape and reel
Historical Part Numbering example: CA-1 50
5 % R05
CA-1
50
5%
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
Document Number: 30214
Revision: 14-Feb-11
For technical questions, contact:
ww2aresistors@vishay.com
www.vishay.com
1
CA
Vishay Dale
Wirewound Resistors, Commercial
Power, Axial Lead
DIMENSIONS
in inches [millimeters]
[1.625 ± 0.125]
(1)
41.28 ± 3.15
[1.625 ± 0.125]
(1)
41.28 ± 3.15
A
Figure 1
A
A'
C
B
Figure 2
A
'
C
B
Note
(1)
On some standard reel pack methods, the leads may be trimmed to a shorter length than shown.
GLOBAL
MODEL
CA0001
CA0002
CA4050
CA4055
CA4060
CA4070
CA4080
CA4090
CA4100
CA4150
CA4200
CA4220
CA5050
CA5055
CA5060
CA5070
CA5080
CA5090
CA5100
CA5150
CA5200
CA5220
A ± 0.031 [0.794]
0.400 [10.16]
0.570 [14.48]
0.500 [12.70]
0.550 [13.97]
0.600 [15.24]
0.700 [17.78]
0.800 [20.32]
0.900 [22.86]
1.00 [25.40]
1.50 [38.10]
2.00 [50.80]
2.20 [55.88]
0.500 [12.70]
0.550 [13.97]
0.600 [15.24]
0.700 [17.78]
0.800 [20.32]
0.900 [22.86]
1.00 [25.40]
1.50 [38.10]
2.00 [50.80]
2.20 [55.88]
A’ (MAXIMUM)
0.460 [11.68]
0.630 [16.00]
0.594 [15.09]
0.644 [16.36]
0.694 [17.63]
0.794 [20.17]
0.894 [22.71]
0.994 [25.25]
1.094 [27.79]
1.594 [40.49]
2.094 [53.19]
2.294 [58.27]
0.625 [15.88]
0.675 [17.15]
0.725 [18.42]
0.825 [20.96]
0.925 [23.50]
1.025 [26.04]
1.125 [28.58]
1.625 [41.28]
2.125 [53.98]
2.325 [59.06]
DIMENSIONS
in inches [millimeters]
B ± 0.001 [0.025]
C
0.032 [0.813]
0.170 maximum [4.32 maximum]
0.032 [0.813]
0.170 maximum [4.32 maximum]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.032 [0.813]
0.140 ± 0.031 [3.56 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
0.036 [0.914]
0.170 ± 0.031 [4.32 ± 0.794]
FIGURE
2
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
MATERIAL SPECIFICATIONS
Element:
Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core:
Woven fiberglass
Coating:
Special high temperature silicone (CA4000 series
is not coated)
Terminals:
Tin/lead electroplated copper (lead (Pb)-free will
be 100 % tin)
End Caps:
Tin plated steel
Part Marking:
CA0001 and CA0002 are printed with value
and tolerance
DERATING
RATED POWER IN %
120
100
80
60
40
20
0
- 65
- 25
25
75
125
175
225
275
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
Humidity
Load Life
Terminal Strength
Resistance to Solder Heat
www.vishay.com
2
CONDITIONS OF TEST
- 55 °C to + 275 °C, 5 cycles, 30 min dwell time
5 x rated power for 5 s
600 V
AC
for 1 min (CA0001, CA0002 and CA5xxx only)
- 65 °C, full rated working voltage for 45 min
75 °C, 90 % to 100 % RH, 240 h
1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”
10 pounds for 30 s; body twisted about axis, 3 x 360° rotations
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
For technical questions, contact:
ww2aresistors@vishay.com
TEST LIMITS (EIA RS-344)
± (5.0 % + 0.05
) R
± (4.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (3.0 % + 0.05
) R
± (5.0 % + 0.05
) R
± (10.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (4.0 % + 0.05
) R
Document Number: 30214
Revision: 14-Feb-11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
