Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
[i=s]This post was last edited by chineseboyzxy on 2022-9-18 21:21[/i]The courier arrived on Sunday, which is great. The standard anti-static bag packaging, the small paper box is quite sturdy, and it...
There is a contempt chain about C language, JAVA and other languages used in the programmer community. Similarly, in the eyes of PCB design engineers, CAD software also has the same B-tearing link. Th...
[i=s]This post was last edited by Purple Sky on 2021-5-17 14:03[/i]Link to ON Semiconductor's official IDE:
Link: https://pan.baidu.com/s/1HihO1gceWMOixCnYgR8aGg
Extraction code: 0btw
The installation...
紫色的天空onsemi and Avnet IoT Innovation Design Competition
Follow the instructions in the manual to open "ChipWatcher". I get a prompt "Please run flow to generate bit before using chip watcher...", which is red and looks like an error warning, which is diffe...
[i=s]This post was last edited by bigbat on 2019-2-22 11:41[/i] The test board I received yesterday afternoon (2019/2/21) was provided by ST. The information of this board is on [url=https://www.stmcu...
The detection system performs real-time recognition and processing of the input spatial transient
optical radiation
signal, inversely estimates the energy of the spatial transient signal and repo...[Details]
As the "eyes" of engineers, it can help discover many problems. As a tool for discovering problems, its accuracy is crucial. When the test environment has no interference to the oscilloscope, in addi...[Details]
The main functions and features of handheld testers are to meet the actual needs of field work. There are great differences in price, performance and application. In the field of integrated cabling te...[Details]
Recently, Karl Storz, a long-established giant in the field of traditional endoscope equipment, announced its intention to acquire the American surgical
robot
company Asensus Surgical at a ...[Details]
When it comes to hacker attacks, most people first think of intrusions at the software and network communication levels. Few people notice that hardware sensors can also be attacked. What is even m...[Details]
1 Introduction
With the rapid economic development, my country's electricity demand has been growing at a rate of more than 20% per year. According to the current economic development trend an...[Details]
Design ideas The main functions of the DC motor PWM control system include: realizing the acceleration, deceleration, forward rotation, reverse rotation and emergency stop of the DC motor, and adjust...[Details]
A mass flow meter is an instrument that accurately measures gas flow. Its measured value will not be inaccurate due to temperature or pressure fluctuations, and does not require temperature and press...[Details]
1. Steps for STM32 serial port download program 1) Install "CH340 driver (USB serial port driver)_XP_WIN7 common" 2) Open the serial port download software "STM32F4 serial port download software (F...[Details]
Abstract: In order to realize the remote real-time interaction function of ultra-high frequency (UHF) reader/writer, this paper uses LPC2138 as the main controller based on Ethernet network card ch...[Details]
introduction
According to research by Strategies Unlimited, the market for high-brightness LEDs is expected to reach $8.2 billion in 2010 and grow to $20.2 billion by 2015, a compound annu...[Details]
Siemens has announced that it will acquire UltraSoC Technologies, a provider of SoC embedded analytics and monitoring solutions. Siemens plans to integrate UltraSoC’s technology into its Xcelerator p...[Details]
1. When debugging OK6410 nandflash to start uboot, you need to add debugging information, which causes uboot to be larger than 256k
2 The following places need to be modified
...[Details]
1. Design of power transformers and audio transformers below 2kVA
Some electronic circuit designers and electronics and electrical enthusiasts often encounter transformers that they have designed ...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
