Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...
1. Copy the DSPLIB target library file 55xdsp.lib or 55xdspx.lib to the 5500 runtime support library - ×××\ti\c5500\cgtools\lib folder, so that 55xdsp.lib can be found during compilation and linking. ...
[color=#000][size=15px]The GBUF pin in Atom Brother's VS1053 module is directly connected to GND after connecting a resistor, but the datasheet says that it is not allowed to be connected to the groun...
Win gifts | TI E2E wireless theme learning month, write down your study notes!Click here to enter the event
Event time: From now until December 31, 2019
Activity Rules:
1. Click the "I want to partici...
It is said that opening windows in circuits can facilitate the passage of large currents. Could you please tell me how much more current can be passed with windows in circuits than without windows?...
I talked to a forum engineer about Guoxin a while ago, and talked about the expiration of M0 and the open sourceToday, I accidentally touched upon STC's family. There was no reason. I was just excited...
According to Phoenix.com, in the China 5G Enhanced Technology R&D Test organized by the IMT-2020 (5G) Promotion Group, Huawei used the Mate 20X 5G version of the mobile phone to make the world's firs...[Details]
VoltServer uses standard data cables and endpoint converters to efficiently and safely transmit large amounts of power over long distances. The world’s digital transformation is well underway, driv...[Details]
In electric vehicles, the temperature of all system units needs to be constantly monitored. High currents lead to losses and corresponding heat generation, especially at the contacts. TDK has now d...[Details]
There are three main types of automotive HUDs: Combiner-HUD (C-HUD), Windshield-HUD (W-HUD), and Augmented Reality HUD (AR-HUD).
（1） C-HUD
C-HUD is more widely used in the aftermarket. It...[Details]
IntroductionIn the 1980s and 1990s, intelligent sensors based on various fieldbus technologies have developed rapidly. Due to the large variety of fieldbuses, the interfaces of intelligent sensors...[Details]
When the master-slave RS trigger is at CP=1, when the input R=S=1, the output state of the master trigger will also be uncertain, thus limiting its practical application. In order to make the logi...[Details]
Gu Chunyuan, head of North Asia and China for the Discrete Automation and Motion Control business unit of ABB Group, a global electrical and automation giant, recently pointed out in an interview wit...[Details]
This article combines the latest domestic and international standards on LED testing methods, and introduces the electrical characteristics, optical characteristics, switching characteristics, colo...[Details]
How to control two stepper motors with one 200SMART?
S7-200SMART CPU can output up to 3 high-speed pulses (except ST20), which means that up to 3 stepper motors can be controlled simultaneousl...[Details]
Coprocessor: A chip that offloads specific processing tasks from a system's microprocessor.
ARM microprocessors can support up to 16 coprocessors for various coprocessing operations.
During program...[Details]
The traditional electronic circuit analysis and design method first designs the circuit and its component parameters according to the index requirements, and then manually estimates the circuit on ...[Details]
Three years ago, two modified Changan Ruicheng completed a 2,000-kilometer autonomous driving road test. For a time, the outside world praised Changan's autonomous driving technology, and the key tec...[Details]
Signal generator is a commonly used signal source, widely used in electronic circuits , automatic control systems and teaching experiments. Signals can be generated by analog circuits, dedicated ...[Details]
How to build a smart driving software vehicle (SDV) architecture?
The autonomous driving intelligent platform can be roughly divided into four parts from bottom to top: hardware platform, syst...[Details]
Altera SoC
京公网安备 11010802033920号
EEWORLD
