ACAS 0612 - Precision
www.vishay.com
Vishay Beyschlag
Precision Thin Film Chip Resistor Array
FEATURES
• Advanced thin film technology
• Two pairs or four equal resistor values
• Relative TCR down to ± 5 ppm/K (tracking)
• Relative tolerance down to ± 0.05 % (matching)
• Pure Sn termination on Ni barrier layer
The ACAS 0612 thin film chip resistor arrays combine the
proven reliability of precision thin film chip resistor products
with the advantages of chip resistor arrays. Defined relative
tolerance (matching) and relative TCR (tracking) make this
product perfectly suited for applications with outstanding
requirements towards stable fixed resistor ratios. A small
package enables the design of high density circuits in
combination with reduction of assembly costs. The ACAS is
available with equal or different resistor values.
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
• Precision analogue circuits
• Voltage divider
• Feedback circuits
• Signal conditioning
TECHNICAL SPECIFICATIONS
DESCRIPTION
EIA size
Metric size
Configuration, isolated
Design:
All equal
Two pairs
Resistance values
Absolute tolerance
Relative tolerance
Absolute temperature coefficient
Relative temperature coefficient
Max. resistance ratio
R
min.
/R
max.
Rated dissipation:
P
70
Element
Package, 4 x 0603
Operating voltage
Operating temperature range
Permissible film temperature
Insulation voltage (U
ins
) against ambient and between
isolated resistors, continuous
0.1 W
0.3 W
75 V
- 55 °C to 125 °C
125 °C
(2)
75 V
AE
TP
47
to 221 k
(1)
± 0.1 %
± 0.05 %
± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
± 15 ppm/K; ± 10 ppm/K; ± 5 ppm/K
1:5
ACAS 0612
0612
RR1632M
4 x 0603
Notes
• The relative figures of tolerance, TCR and drift are related to a medial axis between the maximum and minimum permissable deviation of
the resistor array. For detailed information please refer to the application note: Increasing Accuracy in Feedback Circuits and Voltage
Dividers with Thin Film Chip Resistor Arrays (www.vishay.com/doc?28194).
(1)
Resistance values to be selected from E24; E192.
(2)
For higher max. film temperature and AEC-Q200 qualification please refer to data sheet ACAS 0606 AT, ACAS 0612 AT - Precision available
on our web site at
www.vishay.com/doc?28770.
Revision: 12-Apr-13
Document Number: 28751
1
For technical questions, contact:
thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ACAS 0612 - Precision
www.vishay.com
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits.
(1)
Vishay Beyschlag
MAXIMUM RESISTANCE CHANGE AT RATED POWER
DESCRIPTION
Configuration, isolated
Operation mode
Rated power per element,
P
70
Rated power per packaging,
P
70
Film temperature
Operating voltage,
U
max.
AC/DC
Max. resistance change at
P
70
R/R
max., after:
1000 h
8000 h
Max. relative resistance change (relative drift) at
P
70
R/R
max., after:
1000 h
8000 h
Note
(1)
Figures are given for arrays with equal values, design type AE.
ACAS 0612
4 x 0603
Precision
0.032 W
0.1 W
85 °C
25 V
Standard
0.1 W
0.3 W
125 °C
75 V
± 0.1 %
± 0.25 %
± 0.25 %
± 0.5 %
± 0.05 %
± 0.125 %
± 0.125 %
± 0.25 %
CIRCUITS
R
1
R
2
R
3
R
4
ACAS 0612
DESIGN
ACAS 0612
AE
TP
R
1
=
R
2
=
R
3
=
R
4
R
1
=
R
4
<
R
2
=
R
3
Revision: 12-Apr-13
Document Number: 28751
2
For technical questions, contact:
thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ACAS 0612 - Precision
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: ACASA1100S2200P500
A
C
A
S
A
1
1
0
0
S
2
2
0
0
P
5
0
0
MODEL/
SIZE
ACA
TERMINAL
S
= Convex
square
SIZE
A
= 0612
RESISTANCE
(1)
3 digit
resistance
value
R
1
,
R
4
1 digit
multiplier
MULTIPLIER
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
ACCURACY
GRADE
(2)
TCR, tracking,
tolerance and
matching
S, T,
or
U
RESISTANCE
(1)
3 digit
resistance
value
R
2
,
R
3
1 digit multiplier
MULTIPLIER
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
PACKAGING
P1
P5
SPECIAL
00
= Standard
Product Description: ACAS 0612 110R S 220R P5
ACA
MODEL/SIZE
ACA
= Chip
array
S
TERMINAL
S
= Convex
square
0612
SIZE
0612
110R
RESISTANCE
R
1
,
R
4 (1)
110R
= 110
1K1
= 1.1 k
22K1
= 22.1 k
S
ACCURACY
GRADE
(2)
TCR, tracking,
tolerance and
matching
S, T,
or
U
220R
RESISTANCE
R
2
,
R
3 (1)
220R
= 220
1K1
= 1.1 k
22K1
= 22.1 k
P5
PACKAGING
P1
P5
Notes
• Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION.
(1)
R
=
R
R
=
R
.
1
4
2
3
(2)
For historical temperature coefficient and resistance ranges please refer to the end of the data sheet.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE
ACCURACY
GRADE
S
ACAS 0612
T
U
ABSOLUTE
TCR
± 25 ppm/K
± 15 ppm/K
± 10 ppm/K
TOLERANCE
± 0.1 %
± 0.1 %
± 0.1 %
TCR
± 15 ppm/K
± 10 ppm/K
± 5 ppm/K
RELATIVE
TOLERANCE
± 0.05 %
± 0.05 %
± 0.05 %
RESISTANCE
VALUE
47
to 221 k
47
to 150 k
47
to 100 k
Notes
• For historical temperature coefficent and resistance range please refer to the end of the data sheet.
• Relative TCR (tracking) down to ± 2.5 ppm/K on request.
• Relative tolerance for resistance values < 80
on request.
Revision: 12-Apr-13
Document Number: 28751
3
For technical questions, contact:
thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ACAS 0612 - Precision
www.vishay.com
Vishay Beyschlag
PACKAGING
TYPE
CODE
P1
ACAS 0612
P5
5000
QUANTITY
1000
PACKAGING
STYLE
Tape and reel
cardboard tape
acc. IEC 60286-3
Type I
WIDTH
PITCH
REEL DIAMETER
8 mm
4 mm
180 mm/7"
DIMENSIONS
W
A
T
2
T
1
L
H
A
1
A
DIMENSION AND MASS
TYPE
ACAS 0612
L
(mm)
1.5 ± 0.15
W
(mm)
3.2 ± 0.15
H
(mm)
0.45 ± 0.1
P
(mm)
0.8 ± 0.1
A
1
(mm)
0.6 ± 0.1
A
(mm)
0.4 ± 0.1
T
1
(mm)
0.3 ± 0.15
T
2
(mm)
0.4 ± 0.15
MASS
(mg)
6.6
PATTERN STYLES FOR CHIP RESISTOR ARRAY
ACAS 0612
U
I
X
Y
G
Z
Dimensions in mm
limits for solder resist
P
0.1
RECOMMENDED SOLDER PAD DIMENSIONS
TYPE
ACAS 0612
G
(mm)
0.7
Y
(mm)
0.7
X
(mm)
0.64
U
(mm)
0.5
Z
(mm)
2.1
I
(mm)
0.3
P
(mm)
0.8
Revision: 12-Apr-13
Document Number: 28751
4
For technical questions, contact:
thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ACAS 0612 - Precision
www.vishay.com
DESCRIPTION
The production of the components is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous film of metal alloy is
deposited on a high grade (96 % Al
2
O
3
) ceramic substrate
using a mask to separate the adjacent resistors and
conditioned to achieve the desired temperature coefficient.
Specially designed inner contacts are realized on both
sides. A special laser is used to achieve the target value by
smoothly cutting a meander groove in the resistive layer
without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with
IEC 60286-3
(3)
.
Vishay Beyschlag
industry, including alcohols, esters and aqueous solutions.
The suitability of conformal coatings, if applied, shall be
qualified by appropriate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliant; the pure tin plating provides compatibility with
lead (Pb)-free and lead-containing soldering processes. The
permitted storage time is 20 years, whereas the solderability
is specified for 2 years after production or requalification.
The immunity of the plating against tin whisker growth has
been proven under extensive testing.
All products comply with the
GADSL
(1)
and the
CEFIC-EECA-EICTA
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EC Restriction of the use of Hazardous
Substances directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using reflow or vapour phase as shown in
IEC 61760-1
(3)
. The encapsulation is resistant to all
cleaning solvents commonly used in the electronics
TESTS
Where applicable, the resistors are tested in accordance
with
EN 140401-801
which refers to
EN 60115-1
and
EN 140400.
Notes
(1)
Global Automotive Declarable Substance List, see
www.gadsl.org.
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
www.eicta.org
policy
environmental policy group
chemicals
jig
Joint Industry Guide (JIG-101 Ed 2.0).
(3)
The quoted IEC standards are also released as EN standards with the same number and identical contents.
FUNCTIONAL PERFORMANCE
Rated Power in %
Standard Mode
Precision Mode
100
80
60
40
20
0
- 55
0
50
70
85
100
125
150
180
Ambient Temperature in °C
For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER
Derating
Revision: 12-Apr-13
Document Number: 28751
5
For technical questions, contact:
thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
京公网安备 11010802033920号
EEWORLD
