Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
X-NUCLEO-IKS01A3 MakeCode Driver CollectionMakeCode Extension for the LSM6DSO Sensor
LIS2DW12 Accelerometer MakeCode Driver
MakeCode driver for the magnetic field sensor LIS2MDL
STTS751 High Accuracy ...
dcexpertST Sensors & Low Power Wireless Technology Forum
[i=s] This post was last edited by chenbingjy on 2018-11-16 13:25 [/i] The circuit requires 16V and 8V, and no common ground. I am a hardware novice, and my boss asked an expert to draw the circuit sh...
OverviewRS485 is a serial data transmission standard widely used in industrial implementations. When implementing RS485 communications, the Modbus protocol is usually used. This distinguishes RS485 fr...
This is the real speed. Too realistic.Cable TV speeds soar to 10Gbps, but fiber can’t handle it? Learn more about DOCSIS 3.1 technology!One breakthrough CATV technology currently under development is ...
"2020 is a crucial year for the construction of ubiquitous power Internet of Things. We must continue to focus on the consumption of new energy, improvement of power grid quality and efficiency, in...[Details]
There are many factors to consider when purchasing a constant temperature and humidity test chamber, among which the size of the chamber volume is the first choice to be made. In order to ensure that ...[Details]
Preface: The linking tool for arm linux can use arm-linux-ld. When linking, you can use the -T command to adopt script control. If the script is not specified, the default script file is used. See the...[Details]
Nidec Advanced Testing Technology Co., Ltd. (hereinafter referred to as "the Company") has established a subsidiary, Nidec Advanced Testing Technology (India) Private Limited, in Bangalore, Karnata...[Details]
Software environment: ADS1.2 Development board: GEC210 Theoretical knowledge: Refer to the introduction of LED principle Because ADS needs to be entered from assembly by default, our code first...[Details]
Arcola Energy, a hydrogen fuel cell system integration expert, has developed a proprietary hydrogen fuel cell (HFC) power system platform, A-Drive, designed for vehicle applications requiring high lo...[Details]
News in the early morning of June 7th, today Apple held the WWDC22 Global Developers Conference and launched iOS 16.
iOS 16 updates the lock screen function and reconstructs its appearance and...[Details]
At noon today, Tianfeng International analyst Ming-Chi Kuo released an industry report saying that the iPhone 13 series wide-angle lens will use 7P lenses. Sunny Optical is expected to pass Apple's 7...[Details]
According to Reuters, Micron announced that it is experimenting with a new chip pricing model called a "forward pricing agreement" aimed at stabilizing the wild price fluctuations that have plagued t...[Details]
Delphi has recently been making a series of investments and acquisitions to enhance its comprehensive strength in areas such as autonomous driving and fuel economy. Tula Technology has also b...[Details]
On November 15, 2023, Dalianda Holdings, a leading international semiconductor component distributor committed to the Asia-Pacific market, announced that its subsidiary Pinjia launched a dual-scree...[Details]
Determining the "pose" (position and orientation) of various objects is useful for a range of computer applications. For example, virtual reality/augmented reality requires receiving pose information...[Details]
Sina Digital News on the morning of July 10th, Wedbush Securities analyst Daniel Ives said that Apple plans to launch the third-generation AirPods at the end of 2019, one of its features will be wate...[Details]
Currently, the display panel technology revolution is at a crossroads of industry development, with LCD, OLED, MiniLED and other technologies all competing fiercely in their respective tracks and pro...[Details]
On October 22, the largest energy storage power station in Shizhu County, Chongqing, the Shizhu County 110 kV Jinzhang Shared Energy Storage Power Station (Phase I), was officially put into operation ...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
