• Glass sealed package assures high reliability and high temperature operation
• Tight tolerance and stability available
• Suitable for RoHS compliant re ow
• Low cost glass sealed crystal solution
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
Moisture Sensitivity Level (MSL) –This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
• Microprocessor crystals
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
8.000
8.000
Operation mode
40.001
40.001
Operating Temperature
Storage Temperature
Frequency Tolerance@ +25°C
Frequency Stability over the Operating
Temperatu ( ref. to +25°C)
re
Equivalent series resistance
-10
-40
-50
-50
-----
-----
-----
-----
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging @ 25°C±3°C
Insulation Resistance
-----
-----
-----
-----
500
Typical
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
18
10
-----
-----
Maximum
100.000
40.000
100.000
60.000
+60
+85
+50
+50
ºC
ºC
ppm
ppm
MHz
Units
Notes
Fundamental
Fundamental AT-
cut (Standard)
3
rd
OT AT -cut
(Standard)
Fundamental AT-
cut (See options)
See options
See options
See options
8.000 – 10.000MHz
(Fundamental)
10.001 – 15.999MHz
(Fundamental)
16.000 – 60.000MHz
(Fundamental)
40.000 – 100.000MHz
(3
rd
OT)
100
60
50
70
7
-----
100
±5
-----
pF
pF
µW
ppm
MΩ
Ω
-----
See options
First year
@ 100Vdc
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
ABM 2-
Frequency in MHz
e.g. 8.000MHz
14.31818MHz
26.000MHz
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
MHz -
-
-
-
-
Packaging
Blank: Bulk
T : 1k reel
T2 : 250pcs/reel
Mode
F: Fund AT for >40MHz
Load Capacitance (pF)
Please specify CL in pF
(8 to 33pF) or S for series
Please contact ABRACON for
other values
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R4 0)
Operating Temp.
(See Table 1 for details)
E : 0°C ~ + 70°C
B : -20°C ~ +70°C
C: -30°C ~ + 70°C
N: -30°C ~ + 85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
(See Table 1 for details)
U: ±10 ppm
G: ±15 ppm
X : ±20 ppm
W: ±25 ppm
Y : ±30 ppm
H: ±35 ppm
A : ±80 ppm
Q: ±100 ppm
V : ±120 ppm
P: ±150 ppm
Note: See Table 1 for the availability of Operating Temp. and Freq. Stability combination
Table 1 Available Combinations of Operating Temp. and Freq. Stability
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
U:±10ppm
√
G:±15ppm
√
√
√
X:±20ppm
√
√
√
W:±25ppm
√
√
√
√
Y:±30ppm
√
√
√
√
√
√*
H:±35ppm
√
√
√
√
√
√*
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
Std:±50ppm
√
√
√
√
√
√*
A:±80ppm
√
√
√
√
√
√
Q:±100ppm
√
√
√
√
√
√
V:±120ppm
√
√
√
√
√
√
P:±150ppm
√
√
√
√
√
√
Note: *: Availability depends on frequency.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
LLC
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OUTLINE DIMENSION:
0.062±.019
(1.6 ±0.20)
Note: Due to the availability of raw materials, the chamfer may not appear on the both pads. Be advised that this does
not affect the electrical characteristics of the crystal in any way.
Dimensions: inches (mm)
REFLOW PROFILE:
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
TAPE & REEL:
T: 1000pcs/reel
T2: 250pcs/reel
Dimensions: mm
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
The thing is, I am designing a brushless motor control board, which is divided into the main control board and the power amplifier board. I have the main control board schematic diagram, but I can't d...
From: https://www.oshwa.org/2020/10/16/oshw-c ... rvey-2020/In 2020, we conducted our third OSHW Community Survey (see 2012 and 2013 ), collecting 441 responses. All questions are optional, so you may...
Today I tested OV2640, using the example program https://github.com/verimake-team/SparkRoad-V/tree/master/demo/16_ov2640_sdram, but the result was not very satisfactory. I have used this OV2640 before...
Dual-channel signal sources naturally need to see the difference between dual-channel and single-channel signal sources. A single-channel signal source outputs only one channel, without a comparison c...
[i=s]This post was last edited by sigma on 2019-6-13 14:33[/i]According to the requirements of previous competitions, the competitions do not specifically specify which type of microcontroller should ...
The more complex test in the Anlu development board is the GAME test, which introduces the CPU and VGA tests. Of course, the CPU should be a soft core.I don't know what instruction set this CPU uses. ...
This is also a very simple program, which mainly uses ARM to implement a small program with a timed 1-second interrupt, and mainly explains the usage of interrupts in ARM7.
The procedure is as follow...[Details]
A logic analyzer is an instrument that uses a clock to collect and display digital signals from test equipment. Its main function is to determine the timing. Unlike an oscilloscope, a logic analyzer ...[Details]
Whether in the R&D laboratory or in production, rapid and accurate characterization of biosensors is an important means of verifying the quality of the biosensor/transducer interface and the ultimate...[Details]
YL-C medical device flow tester Testing of medical devices not only tests for tightness, but also considers occlusion and fluid restriction. Especially for blood-related medical devices, where such p...[Details]
With the development of the electronics market, its prospects are undoubted, and the electronic measuring instruments and equipment that complement it are also widely used. As for the DC electronic lo...[Details]
Digital high-voltage meter (AC/DC voltage divider) is used in power systems and electrical and electronic equipment manufacturing departments to measure industrial frequency AC high voltage and DC ...[Details]
Will it return after the exception? Will the application be killed? Will the kernel panic? Will gic continue to be interrupted? .section .vectors, "ax", %progbits .L__vectors_start: W(b) ve...[Details]
Let’s get to the point, what we are going to learn today is the concept of driver layering/separation. The purpose of separation and layering is to separate hardware-related code from relativel...[Details]
Thermoelectric conversion materials have three basic effects, namely the Peltier effect, the Seebeck effect and the Thomson effect. These three effects lay the foundation for the thermoelectric theory...[Details]
1. How to detect the quality of AC three-phase motor? 1. Use a megohmmeter (a 500V megohmmeter will do). If the insulation resistance of the wires on the three terminals to the motor housing is above...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can remotely ...[Details]
A multimeter is a multi-power, multi-range portable electrical measuring instrument. Multimeters can usually measure DC current, DC voltage, AC voltage, DC resistance, etc. Some multimeters can also ...[Details]
TFN FB11 Cable Fault Tester Overview TFN FB11 cable fault tester is the result of TFN's continuous improvement and innovation over the years. The technical level of the whole system has reached the i...[Details]
Gelion claims to have achieved a high energy density milestone by manufacturing a commercially available 395Wh/kg lithium-sulfur 9.5Ah pouch cell, a 60% increase in energy density c...[Details]
On November 7, 2024, Tailan New Energy and Changan Automobile jointly held a diaphragm-free solid-state lithium battery technology conference in Chongqing. The two parties jointly launched diaphrag...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
