Parallel - Fundamental Quartz Crystal, 14.3181MHz Nom, HC/49US, 2 PIN
ABL2-14.3181MHZ-10-K1R-L2 Parametric
Parameter Name
Attribute value
Is it lead-free?
Lead free
Is it Rohs certified?
conform to
Objectid
1323191697
package instruction
HC/49US, 2 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
6.25
Other features
AT-CUT
Ageing
5 PPM/YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
100 µW
frequency stability
0.015%
frequency tolerance
10 ppm
load capacitance
10 pF
Installation features
THROUGH HOLE MOUNT
Nominal operating frequency
14.3181 MHz
Maximum operating temperature
125 °C
Minimum operating temperature
-40 °C
physical size
11.5mm x 5.0mm x 2.5mm
Series resistance
50 Ω
surface mount
NO
ABL2-14.3181MHZ-10-K1R-L2 Preview
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed
and not Moisture Sensitive - MSL = N/A: Not Applicable
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
FEATURES:
• Reduced height at 2.5mm
• High reliability & Low Cost
• Tight stability & extended temperature
• Proven resistance welded metal package
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
3.579545
3.579545
Operation mode
24.01
24.01
Operating Temperature
Storage Temperature
Frequency Tolerance
Frequency Stability over the Operating
Temperature
(
ref. to +25°C)
Equivalent series resistance
(R1)
Shunt capacitance
(C0)
Load capacitance
(CL)
Drive Level
Aging @
25°C per year
Insulation
Resistance
Drive Level Dependency
(DLD,
Minimum
7 points tested:
from
1µW to
500µW)
0
-55
-50
-50
APPLICATIONS:
• Home electronics
• Computers, modems, and communications
• Automotive and industrial
• High-precision TCXO and clock applications
• Microprocessors
Typical
Maximum
70
24.0
70.00
50.00
+70
+125
+50
+50
See table 1 below
7
18
100
500
±10
25% of
Max
ESR
Max
ESR in
Table 1
1000
±5
ºC
ºC
ppm
ppm
Ω
pF
pF
µW
ppm
MΩ
ppm
Ω
Ω
MHz
Fundamental
AT-
cut
(Standard)
3
rd
OT
AT-cut
(Standard)
Fundamental
AT-
cut or
BT-cut (See
options)
See options
See options
See options
Units
Notes
See options
@
100Vdc
±
15V
Δfrequency
(Max –
Min)
ΔESR
(Max – Min)
Max
ESR over DLD
range
Table 1
Frequency (MHz)
3.579 - 4.999 (Fund.)
5.000
-
5.999
(Fund.)
6.000 -
7.999
(Fund.)
8.000
-
8.999
(Fund.)
9.000
-
9.999
(Fund.)
10.000
-
15.999
(Fund.)
16.000
-
50.000
(Fund.)
24.01
-
31.999
(3rd
O/T)
32.000 -
70.00
(3rd
O/T)
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
ESR(Ω) max.
180
120
100
80
60
50
40
100
80
Revised: 01.08.13
30332
Esperanza, Rancho Santa
Margarita,
California 92688
tel 949-546-8000
|
fax
949-546-8001
|
www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OPTIONS AND PART IDENTIFICATION:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 -
Frequency in MHz
Please specify the frequency
in xx.xxxxMHz.
e.g. 14.3181MHz
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
Custom ESR if other
than standard
R□
□:
Specify a value in
Ω
(e.g.: R40)
MHz-
-
-
-
-
-
Packaging
Blank: Bulk
T: Tape & Reel
TRAY: Tray
Value Added
I
Insulator Tab
L2
Middle 3rd lead
QXX
Trimmed leads
Q15
for 0.15" length
Oscillation Mode
F: Fund. AT>24MHz
FB: Fund. BT>24MHz
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J*: -40°C ~ +105°C
K*: -40°C ~ +125°C
L*: -55°C ~ +125°C
Freq. Tolerance
H5: ± 5 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
R: ± 150 ppm
NOTE:
* Frequency stability ±50ppm, ±100ppm, ±150ppm only. Contact ABRACON for tighter frequency stability.
** -10 to +60C only.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OUTLINE DIMENSIONS:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 SERIES HC49/US (AT49)
MICROPROCESSOR CRYSTAL
Date of Issue: Jan. 2
nd
, 2013
Page (8) of (10)
8.0
Packaging:
L
5.5mm Min
20.0 ± 0.5mm
Packaging
Bulk
Tape & Reel
11.5 x 5.0 x 2.5 mm
Abracon Drawing # 450715
Revision #: K
T= Tape and reel (1,000pcs/reel)
Dimensions: inch (mm)
TAPE & REEL:
T= Tape and reel (1,000pcs/reel)
Dimensions: mm
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
Everyone, I have been using Toshiba's integrated chips, but now I find that the currents are all small, not large. I can only use discrete components to build large currents myself. I saw an introduct...
In the automotive cockpit electronics market, an increasingly obvious trend is that audio, voice and acoustic related applications are expanding rapidly as automakers strive to differentiate their veh...
[i=s]This post was last edited by yang_alex on 2022-2-17 21:50[/i]GD32L233C-START has two software development environments: Keil MDK-ARM and IAR EWARM. Keil is currently the most commonly used in Chi...
Sharing a note from many years ago can show you how to combine digital and analog to create some innovations. Only by truly digesting and absorbing the principles and basics and applying them in pract...
Through PC-based control, EtherCAT and artificial intelligence (AI), we provide customers with flexible conductive patterning technology to meet high-precision processing requirements.
P...[Details]
The input subsystem consists of three parts: the driver layer, the input subsystem core, and the event processing layer. An input event, such as mouse movement, keyboard press, etc., reaches the us...[Details]
There are three types of transmission devices for electric motors: gear transmission, belt transmission and coupling transmission. When installing these three transmission devices, the following ma...[Details]
On March 29, a delegation of Shijiazhuang city leaders visited Meimiao Energy Storage for an on-site inspection. The two sides exchanged views on the Meimiao Energy Storage all-vanadium liquid ...[Details]
GIC is an important component in the ARM system. After understanding the composition and function of GIC, we can understand the general process of IRQ, from the arrival of hardware IRQ to the end o...[Details]
A few days ago, Infineon held its first Oktobertech offline summit in Shenzhen. At the venue, Infineon and its partners jointly demonstrated a number of highly innovative demos. Here are some of the ...[Details]
1. Cross tool chain:
Cross tool chain actually has two meanings. One is cross tool. The so-called cross tool means that the running environment and the compiling environment are not integrated...[Details]
During this period, I developed an image recognition project based on WinCE6.0+s3c6410 system, using the 6410 development board of Youjian Hengtian. The development board has an OV9650 camera inter...[Details]
The Queensland government has pledged to invest in a factory in Australia to produce flow batteries based on iron electrolyte technology. The state will invest A$25 million (US$17.12 million) in the f...[Details]
When porting the mini2440 driver to 2.6.31, the compiler prompts that similar definitions such as S3C2410_GPB5 and S3C2410_GPB5_OUTPUT are missing. So I searched for the header files in the relevan...[Details]
On September 18, Professor Li Daochun and Academician Xiang Jinwu's team from the Beijing University of Aeronautics and Astronautics published a paper titled "Robot Pilot: A New Autonomous System T...[Details]
Since its establishment, Leadshine has been serving the world's manufacturing industry, focusing on the field of motion control.
In 2008, in order to meet the domestic demand for domestic subs...[Details]
Stepper motors are often used for positioning control. The number of pulses output by the PLC can control the angle of rotation (relatively speaking, it can be the distance), and the frequency of t...[Details]
~ A new solution for 1-cell battery-driven thermal print head, helping to make application products smaller, lighter, and more energy-saving ~ ROHM, a world-renowned semiconductor manufacturer (he...[Details]
STMicroelectronics will supply BorgWarner with its latest third-generation 750V silicon carbide for its proprietary Viper-based power modules. The power modules will be used in BorgWarner’s traction ...[Details]
Motor Drive Control（Motor Control）
京公网安备 11010802033920号
EEWORLD
