PC Card Socket Connector Complies with PC card Standard
IC1 Series
sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge, avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,-
0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
-55ç to +85ç (Note 1)
95% R.H. max.
(No condensation)
Specification
1000Mø min.
No flashover or insulation breakdown.
40 mø max. (initial value) (Note 3)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s
2
(peak), 4 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
-55ç, 30 min
/15
to 30ç, within 5 min/85ç, 30 min
/15
to 35ç, within 5 min, for 5 cycles
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Storage temperature
Storage humidity
Conditions
-40ç to +70ç (Note 2)
40% to 70% (Note 2)
sProduct
Specifications
Current rating 0.5 A
Ratings
Voltage rating 125 V AC
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Operating temperature
Operating humidity
5.
Humidity (Steady state)
Insulation resistance: 100 Mø min.
6.
Temperature cycle
7.
Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
No damage, cracks, or parts looseness.
Change of contact resistance from the
start should be 20 mø max.
No deformation of components
affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Material
PPS
IC1K,IC1HA:Phosphor bronze
Others:Beryllium copper
Finish
Color : Black
Contact Area : gold plating
Lead Area
: solder plating
Remarks
UL94V-0
-----------------
A73
sOrdering
Information
IC1 F -
*
R D - 1.27 SH
1
1
2
2
3
4
5
6
7
Series name : IC1
BB: Compliant with PC Card Standards
F:
Compliant with PC Card Standards
Lead offset type
K:
3
4
5
6
7
Compliant with PC Card Standards
Connector thickness: 2.7mm
Suited to automatic mounting
Contacts: 40, 68
R: Card Connector
D: 2-row arrangement
Contact pitch: 1.27mm
Mounting method
SH: Two sided board terminations
SHA: Two sided board terminations
SF:
Single surface mount type.
SFA: Single surface mount type.
SFB: Single surface mount type.
HA: Compliant with PC Card Standards
Connector thickness: 2.8mm
Connector thickness: 2.7mm
Connector thickness: 2.7mm
s68
Contacts Card Connectors
qConnector
thickness : 2.7mm
qLead
offset type
qSuited
to automatic mounting
qSingle
surface mount type
IC1K-68RD-1.27SFA
CL640-0047-2
B
PCB mounting pattern
Unit:mm
Part Number
IC1K-68RD-1.27SF
IC1K-68RD-1.27SFA
IC1K-68RD-1.27SFB
CL No.
640-0046-0
640-0047-2
640-0048-5
A
2
2
3
B
0.3
0.9
-------
C
5
5
6
A74
s68
Contacts Connector
qConnector
thickness:2.8mm
qTwo
sided board termination on the center line
Compliant with PC Card Standard
IC1BB-68RD-1.27SH
CL640-0036-6
•
Recommended board thickness : 0.4
to
0.5mm
s68
Contacts Connector
qConnector
thickness:2.7mm
qTwo
sided board terminations
qTwo
Mounting levels of board terminations
Compliant with PC Card Standard
IC1HA-68RD-1.27SH
CL640-0044-4
• Recommended board thickness : 0.4
to
0.5mm
1
For 0.45mm board thickness
Part Number
IC1HA-68RD-1.27SH
CL No.
640-0044-4
IC1HA-68RD-1.27SHA 640-0045-7
A76
_pdf/pg_0001.png)
京公网安备 11010802033920号
EEWORLD_pdf/1.png)
_pdf/2.png)
_pdf/3.png)
_pdf/4.png)
_pdf/pg_0002.png)
_pdf/pg_0003.png)
_pdf/pg_0004.png)
