-
introduction
In lighting technology, electronic energy-saving lamps have increasingly become people's first choice because of their wide range of applications, good energy-saving and environ...[Details]
-
Introduction: Data collection and processing are widely used in the field of automation. Due to different application occasions, the hardware required for data collection and processing is also dif...[Details]
-
The number of chips in traditional cars is about 500 to 600, and the number of chips in autonomous driving and new energy vehicles is about 1,000 to 1,200. Models focusing on smart driving or autonom...[Details]
-
The first step of autonomous driving is positioning. Knowing where you are can guide the route planning and control the car. Currently, cars mainly use GPS navigation. Since GPS is not very accurat...[Details]
-
There is a significant difference between LED and incandescent lamp: the brightness of LED is basically proportional to the forward current flowing through the LED. By taking advantage of this featur...[Details]
-
Chip data sheet: can be searched and downloaded at www.microchip.com. Currently most new chips have Chinese data sheets.
Free integrated development environment MPLAB IDE
Free integrated ...[Details]
-
M12 (17-pin) is often used for complex applications that transmit multiple, power and data, such as, machine control and systems. The following are the general wiring methods and installation steps...[Details]
-
Siemens S7-1500PLC is used in medium and large projects. It is an upgraded version of S7-300/400PLC. Compared with 200/200 SMART PLC, 1500 is a little more difficult. Communication is a more import...[Details]
-
In order to adapt to the needs of fingerprint collection sensor devices and fingerprint identification systems developing in the direction of miniaturization and embeddedness, this article proposes a...[Details]
-
On May 27, Broadcom showed a vehicle Ethernet demonstration system (Demo) to multiple media outlets, and based on the system, explained the relevant technologies and future development prosp...[Details]
-
What is a head mounted display?
A head-mounted display (HMD) is a wearable display device worn on the head, usually in the form of glasses, helmets or head-mounted devices. It places the displ...[Details]
-
Fluorescent lamps are popular all over the world as a soft and effective light source. They can be found wherever lighting is needed, whether in homes, shops, offices, schools, supermarkets, hospit...[Details]
-
Variable Frequency Drive (VFD) and Servo Drive are two common motor drive devices. They have different characteristics and uses in practical application scenarios. This article will introduce the d...[Details]
-
On September 26, Suzhou Minxin Microelectronics Technology Co., Ltd. ("Minxin") held a groundbreaking ceremony for the R&D and production building, which is expected to be officially put into use in ...[Details]
-
1 Introduction
The switching power supply is a DC regulated power supply controlled by a switch mode. It is widely used in various electronic devices for its small size, high efficiency an...[Details]