Any frequency between 80.000001 and 220 MHz with 6 decimal places of accuracy
■
100% pin-to-pin drop-in replacement to quartz-based TCXO
■
Excellent total frequency stability as low as ±1 PPM (see SiT5004 for ±0.5 PPM option)
■
Ultra low phase jitter: 0.5 ps (12 kHz to 20 MHz)
■
Voltage control option with pull range of ±12.5 PPM, ±25 PPM or ±50 PPM
■
LVCMOS/HCMOS compatible output
■
Voltage control, standby, output enable or no connect modes
■
Three industry-standard 4-pin packages: 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm (For 6-pin, contact SiTime)
■
Outstanding silicon reliability of 2 FIT (10x improvement over quartz-based devices)
■
Ultra short lead time
■
Ideal for telecom, networking, smart meter, GPS and wireless applications
■
Specifications
Electrical Characteristics
Parameter
Output Frequency Range
Frequency Stability
Initial tolerance
Stability over temperature
Symbol
f
F_init
F_stab
Min.
80.000001
-1
-1
-1.5
-2.5
-5
Supply Voltage
Output Load
Aging
Operating Temperature Range
Supply Voltage
F_vdd
F_load
F_aging
T_use
Vdd
–
–
–1.0
-20
-40
1.71
2.25
2.52
2.70
2.97
10
–
–
–
–
45
–
90%
–
–
70%
–
–
–
–
–
–
Typ.
–
–
–
–
–
–
0.05
0.1
–
–
–
1.8
2.5
2.8
3.0
3.3
±12.5, ±25, ±50
–
Positive slope
–
33
32
10
–
1.5
–
–
–
–
–
–
–
6
1.7
0.5
Max.
220
1
+1
+1.5
+2.5
+5
–
–
1.0
+70
+85
1.89
2.75
3.08
3.3
3.63
90
8
TBD
TBD
TBD
55
–
–
10%
15
–
30%
10
TBD
TBD
–
–
Unit
MHz
PPM
PPM
PPM
PPM
PPM
PPM
PPM
PPM
°C
°C
V
V
V
V
V
PPM
%VDD
–
kHz
mA
mA
μA
%
ns
Vdd
Vdd
pF
Vdd
Vdd
ms
ms
ms
ps
ps
at 25°C
Over operating temperature range at rated nominal power supply
voltage (1.8V, 2.5V, 2.8V, 3.0V or 3.3V) and nominal load (15 pF).
Condition
±10% Vdd (±5% for Vdd = 1.8V)
±10% of
15 pF load
1st year, 25°C
Extended Commercial
Industrial
Pull Range
Control Voltage
Frequency Change Polarity
Control Voltage -3dB Bandwidth
Current Consumption
Standby Current
Duty Cycle
Rise/Fall Time
Output Voltage High
Output Voltage Low
Output Load
Input Voltage High
Input Voltage Low
Startup Time
OE Enable/Disable Time
Resume Time
RMS Period Jitter
RMS Phase Jitter (random)
PR
VC
–
V_BW
Idd
I_stby
DC
Tr, Tf
VOH
VOL
Load
VIH
VIL
T_start
T_oe
T_resume
T_jitt
T_phj
No load condition, f = 100MHz, Vdd = 2.5 V, 2.8 V, 3.0 V or 3.3 V
No load condition, f = 100MHz, Vdd = 1.8 V
ST = GND, All Vdd, Weak internal pull down
All Vdds.
15 pF load, 10% - 90% Vdd
IOH = TBD mA
IOL = TBD mA
At maximum frequency and supply voltage. Contact SiTime for higher
output load option
Pin 1, OE or ST
Pin 1, OE or ST
Measured from the time Vdd reaches its rated minimum value
Measured from the time ST pin crosses 50% threshold
f = 100 MHz, Integration bandwidth = 12 kHz to 20MHz,
all Vdds
f = 100 MHz, Integration bandwidth = 12 kHz to 20MHz,
all Vdds
SiTime Corporation
Rev. 0.57
990 Almanor Avenue
Sunnyvale, CA 94085
(408) 328-4400
www.sitime.com
Revised August 10 2011
SiT5002
80 to 220 MHz MEMS TCXO and VCTCXO
Advanced Information
■
Specifications (Cont.)
Pin Description Tables
Pin #1 Functionality
VIN
0 - Vdd: produces voltage dependent frequency change
OE
H or Open
[1]
: specified frequency output
L: output is high impedance
ST
H or Open
[1]
: specified frequency output
L: output is low level (weak pull down). Oscillation stops
NC
H or L or Open: No effect on device functions
Pin Map
Pin
1
2
3
4
Connection
OE/ST/NC/VC
GND
CLK
VDD
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual performance of the IC
is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameter
Storage Temperature
VDD
Electrostatic Discharge (Human Body Model)
Soldering Temperature (follow standard Pb free soldering guidelines)
Number of Program Writes
Program Retention over -40 to 125°C, Process, VDD (0 to 3.65 V)
Min.
-65
-0.5
–
–
–
1,000+
Max.
150
4
2000
260
1
–
Unit
°C
V
V
°C
NA
years
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Temperature Cycle
Solderability
Moisture Sensitivity Level (MSL)
Condition/Test Method
MIL-STD-883F, Method 2002
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL1 @ 260°C
Phase Noise Plot
Note:
1. In 1.8V mode, a resistor of <100 kΩ between OE pin and Vdd is required. For other supply voltage options, SiTime recommends using a similar pull-up resistor.
Rev. 0.57
Page 2 of 4
www.sitime.com
SiT5002
80 to 220 MHz MEMS TCXO and VCTCXO
Advanced Information
■
Dimensions and Land Patterns
Package Size – Dimensions (Unit: mm)
[2]
3.2 x 2.5 x 0.75 mm
3.2 ± 0.15
#4
#3
#3
Recommended Land Pattern (Unit: mm)
[3]
2.1
#4
2.2
0.9
YXXXX
2.5 ± 0.15
0.75 ± 0.05
0.9
1.4
5.0 x 3.2 x 0.75 mm
5.0 ± 0.15
#4
#3
#3
2.39
#4
2.54
YXXXX
3.2 ± 0.15
0.8
0.75 ± 0.05
1.15
1.5
7.0 x 5.0 x 0.90 mm
7.0 ± 0.15
5.08
5.08
5.0 ± 0.15
2.6
YXXXX
1.1
3.81
0.90 ± 0.10
1.4
2.2
Notes:
2. Top marking: Y denotes manufacturing origin and XXXX denotes manufacturing lot number. The value of “Y” will depend on the assembly location of the device.
3. A capacitor of value 0.1
μF
between Vdd and GND is recommended.
Rev. 0.57
Page 3 of 4
2.0
1.6
#1
#2
#2
#1
1.1
2.2
1.2
#1
#2
#2
#1
0.7
1.9
www.sitime.com
SiT5002
80 to 220 MHz MEMS TCXO and VCTCXO
Advanced
■
Part No. Guide
-
How to Order
SiT5002AC -2D-18VQ-1 5 5 .520000T
Packaging
Part Family
SiT5002
Revision Letter
“A” is the revision
Temperature Range
“C” Commercial, -20 to 70ºC
“I” Industrial, -40 to 85ºC
Output Waveform
“-“ Default
[4]
Package Size
“2” 3.2 x 2.5 mm
“3” 5.0 x 3.2 mm
“8” 7.0 x 5.0 mm
Frequency Stability
“A” for ±1.0 PPM
“B” for ±1.5 PPM
“D” for ±2.5 PPM
“E” for ±5 PPM
“T”: Tape & Reel, 3K reel
“Y”: Tape & Reel, 1K reel
Blank for Bulk
Frequency
80.000001 to 220.000000 MHz
“0” for fixed frequency
(Pin1 = “E”, “S” or “N” options)
Pull Range Options
(Pin1 = “V” option only)
“Q” for ±12.5 PPM
“M” for ±25 PPM
“B” for ±50 PPM
Feature Pin (pin 1)
“V” for Voltage Control
“E” for Output Enable
“S” for Standby
“N” for No Connect
Supply Voltage
“18” for 1.8 V ±5%
“25” for 2.5 V ±10%
“28” for 2.8 V ±10%
“30” for 3.0 V ±10%
“33” for 3.3 V ±10%
Notes:
4. Contact SiTime for SoftEdge
TM
output waveform that reduces EMI and is similar to clipped sinewave in functionality
Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)
unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer:
SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any sitime product and any product documentation. products sold by
sitme are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved or
at stake. all sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to
the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be
[i=s]This post was last edited by qwqwqw2088 on 2020-11-25 08:09[/i]In a battery-powered system, power consumption requirements, power supply voltage monitoring, and system reset circuit reliability p...
Improvements in 5G radio signal processing could save $193 million per U.S. fixed wireless access mmWave O-RAN networkMobile Experts study commissioned by AccelerComm shows enhanced LDPC IP can reduce...
Portal for previous serialized articles of the project:[Flathead RVB2601 Creative Application Development] Introduction and use of KV components of RVB2601[Flathead RVB2601 Creative Application Develo...
Design Name: IGBT DriverProject description: Use the GD32 pwm module to make an IGBT driver, which uses two timers, one for the high frequency part and the other for the low frequency part.System bloc...
introduction
In order to ensure that the solar power generation system can work normally, it is necessary to measure the various environmental parameters of the solar power generation syst...[Details]
In order to improve the traffic capacity of highway toll gates and reduce the traffic congestion at highway toll gates, a non-stop toll collection system based on RFID was designed and developed. I...[Details]
On the morning of February 4, third-party market research firm Counterpoint released its annual report on the U.S. smartphone market. The report shows that almost all mobile phone brands in th...[Details]
Many people wear watches for the purpose of keeping time. However, apart from radio-controlled watches, other watches will have certain deviations after running for a long or short period of time. Why...[Details]
Espoo, Finland, February 9, 2021 - Qt, a leading global software technology provider, announced that Stellantis Group, a global automaker and provider of innovative mobility solutions, has partnered ...[Details]
PLC instructions are the instruction set of the programmable logic controller (PLC), also known as PLC programming instructions. PLC instructions are commands used to program the programmable logic...[Details]
On May 14, BYD released an electric vehicle torque control technology iTAC (intelligence Torque Adaption Control). BYD said that in order to improve the driving performance of electric vehicles whi...[Details]
According to the Boltzmann transport equation, the current density in the carrier continuity equation can be expressed by the drift-diffusion model. In this case, the current density is expressed i...[Details]
The national finals of the "2019 National University Student Internet of Things Design Competition" (hereinafter referred to as the "Internet of Things Design Competition"), hosted by the Higher Educ...[Details]
1. The common steps when measuring voltage with a multimeter are as follows: First, align the range switch within the five ranges marked V (when testing AC voltage, align it with the AC voltage r...[Details]
1 Introduction
Nowadays, modular power supplies have been widely used in various fields of social production and life, such as aerospace, locomotives and ships, military weapons, post and tele...[Details]
The scope and concept of the embedded world are extremely broad, ranging from ASIC to MCU. ASIC is a technology with great potential and innovation. Although its design is very expensive and takes se...[Details]
/* Coder: Farman Date : 2018-01-02 I referred to the manufacturer's TM1637 data sheet and would like to express my gratitude. */ #include STC89C5XRC.h //Include 52 MCU header file #include "Delay....[Details]
The automotive power electronics market is expected to grow rapidly in the future, with market research firms predicting that the market will exceed US$20 billion in 2026. Acumen Research and Consul...[Details]
Mitsubishi PLC (Programmable Logic Controller) is a control device widely used in the field of industrial automation. It has the characteristics of flexible programming, powerful functions, high re...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
