DATASHEET
Ecosine max (5% THDi) FN 3472
Ecosine max, 400 VAC 60 Hz Full Performance Passive Harmonic Filters
Demonstrate best cost-performance ratio
Achieve 5% THDi for diode rectifier without
DC-link choke and thyristor rectifier
Best-in-class partial load performance
Most compact open panel design for cabinet
integration
Reliable and robust
Plug and play, ready to use
Approvals & Compliances
Features and benefits
Schaffner ecosine harmonic filters represent an
economical solution to the challenge of load-applied
harmonics mitigation in three-phase power systems.
With a plug-and-play approach and more compact
dimensions than comparable products, they can be
quickly installed and easily commissioned. They
increase the reliability and service life of electric
installations, help utilize electric sytem capacity
better, and are the key to meet Power Quality
standards such as IEEE 519. Ecosine filters reshape
your distorted current back to the desired sinusoidal
waveform. Schaffner ecosine filters can be applied to
virtually any kind of power electronics with front-end
six-pulse rectifiers, 3-phase diode or thyristor bridges,
where harmonic current distortion needs to be
reduced to defined limits.
Technical specifications
Nominal operating voltage
Operating frequency
Nominal motor drive input power rating
Total harmonic current distortion THDi*
Efficiency
Overload capability
SCCR**
High potential test voltage
Overvoltage category
Earthing System
Protection category
Cooling
Ambient temperature range
3 x 380 VAC to 415 VAC ±10%
60 Hz ±1 Hz
280 to 480HP
<5% @ rated power for drives without Ldc
~3.5% @ rated power for drives equipped with 4% Ldc
>99% for rated voltage and power
1.6x rated current for 1 minute, once per hour
100 kA (UL approved)
P -> E 2520 VAC (1s)
OV III (IEC 60664-1)
TN, TT, IT
IP 00
External cooling***
–25°C to +40°C fully operational
+40°C to +70°C derated operation****
–25°C to +85°C transport and storage
Filter: UL 61800-5-1, EN 61800-5-1
Chokes: EN 60076-6
UL 94 V-2
>200,000 hours
Typical applications
Equipment with front-end six-pulse rectifier
Motor drives
Factory automation equipment
Water/wastewater treatment facilities
Fan and pump applications
HVAC installations
Mission-critical processes
DC fast chargers
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/400 V (Mil-HB-217F)
Typical electrical schematic
*****System requirements: THDv <2%, line voltage unbalance <1%
*****Note:
performance specifications in this brochure refer to six-pulse diode rectifiers.
*****SCR
rectifier front-ends will produce different results, dependent upon the firing angle of the thyristors.
*****External UL-rated fuses required. Please consult the user manual.
*****Please check the inlet air flow required for cooling table further in this document and the user manual.
*****I
derated
= I
nominal
*√((T
max-
T
amb
)/(T
max-
T
nominal
)) = I
nom
*√((70°C-T
amb
)/30°C)
5
Ecosine passive
Schaffner Group
Datasheets
09 Oct 2020
Headquarters, global
innovation and development
Switzerland
Schaffner Group
Industrie Nord
Nordstrasse 11e
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com
PQ sales
Switzerland
Schaffner Power Quality EMEA
Nordstrasse 11e
4542 Luterbach
T +41 32 681 66 80
pqsales@schaffner.com
China
Schaffner Power Quality China
T20-3 C, No 565 Chuangye Road
Pudong district
201201 Shanghai
T 021-38139500-2412
pqsales@schaffner.com
Singapore
Schaffner Power Quality APAC
#05-09, Kg Ubi Ind. Estate
Blk 3015A Ubi Road 1
408705 Singapore
T +65 6460 4166
pqsales@schaffner.com
www.schaffner.com
© 2020 Schaffner Group
The content of this document has been
carefully checked and understood. However,
neither Schaffner nor its subsidiaries assume
any liability whatsoever for any errors or
inaccuracies of this document and the
consequences thereof. Published specifica-
tions are subject to change without notice.
Product suitability for any area of application
must ultimately be determined by the
customer. In all cases, products must never
be operated outside their published
specifications. Schaffner does not guarantee
the availability of all published products. This
disclaimer shall be governed by substantive
Swiss law and resulting disputes shall be
settled by the courts at the place of business
of Schaffner Holding AG. Latest publications
and a complete disclaimer can be downloa-
ded from the Schaffner website. All
trademarks recognized.