Hot air leveling is also called tin spraying. The process is: dip flux on the printed circuit board, place it in molten solder for dipping, and then pass it between two air knives. Use the hot compres...
Problem phenomenon: 1. When TLE7183F is powered on, there is no voltage difference between the output gate-source voltage, but the gate and source both have ground voltages, and the voltages are the s...
MicroPython was ported to an STM32F407 board. Due to hardware design reasons, only ordinary IO ports could be used to simulate SPI communication. Therefore, a MicroPython driver was written in C langu...