RV
www.vishay.com
Vishay Sfernice
High Precision Wraparound Thin Film Chip Resistors
FEATURES
• Nickel barrier for high temperature operating
conditions
Available
LINKS TO ADDITIONAL RESOURCES
• Tight TCR < 10 ppm/°C, and in lot tracking
< 5 ppm/°C in (-55 °C, +155 °C temperature
range)
• Non-inductive
• Laser trimmed down to 0.1 %
• Wraparound resistance less than 0.01
Ω
Available
D
D
3
3
3D Models
• Very low noise < 35 dB and voltage coefficient 0.1 ppm/V
Utilizing proven expertise in thin film resistors, Vishay
provides a chip manufactured according to CECC with the
same reliability and stability found in QPL resistors. These
chips are available in a wide range of sizes, values, and
performance characteristics.
• Antistatic waffle-pack or tape and reel packaging
available
• High stability (0.05 % - 1000 h at Pn at +70 °C)
• Withstand moisture resistance test of AEC-Q200
• According to CECC 40401-010
CONSTRUCTION
Passivation
Passivated NiCr
resistance film
Solder
coating
Nickel barrier
High purity
alumina substrate
Adhesion layer
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RV
RV
RV
RV
SIZE
0505
0603
0805
1206
RESISTANCE
RANGE
(1) (2)
Ω
100 to 260K
100 to 260K
100 to 300K
100 to 1M
RATED POWER
Pn
W
0.125
0.125
0.200
0.330
LIMITING ELEMENT
VOLTAGE (UL)
V
50
50
50
75
TOLERANCE
±%
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
TEMPERATURE
COEFFICIENT
± ppm/°C
10, 25
10, 25
10, 25
10, 25
Notes
(1)
Extended resistance range on request
(2)
For ohmic range versus tolerance and TCR, see detailed table
CLIMATIC SPECIFICATIONS
Operating temperature range
Storage temperature range
-55 °C to +155 °C
-55 °C to +155 °C
OHMIC RANGE VS. TOLERANCE AND TCR
CASE SIZE
0505
0505
OHMIC RANGE
Ω
100 < 500
500 to 260K
100 < 500
500 to 260K
100 < 500
500 to 300K
100 < 500
500 to 1M
TOLERANCE
%
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
TCR
ppm/°C
10, 25
10, 25
10, 25
10, 25
10, 25
10, 25
10, 25
10, 25
MECHANICAL SPECIFICATIONS
Resistive material
Substrate material
Plating
Marking resistance to solvents
Nichrome
Alumina
Tin lead over nickel or tin silver
over nickel or gold over nickel
Per CECC specs
0603
0603
0805
0805
1206
1206
Revision: 04-Oct-2021
Document Number: 60022
1
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RV
www.vishay.com
TECHNICAL SPECIFICATIONS
TEST
Absolute TCR
Absolute tolerance
Voltage coefficient
Noise
Thermal EMF
Load life stability
Note
(1)
Rn: nominal resistance
SPECIFICATIONS
E: ± 25 ppm/°C / Y: ± 10 ppm/°C
± 0.1 %, ± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R
≥
500
Ω)
± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R
≥
100
Ω)
0.1 ppm/V
-35 dB typical
< 0.1 μV/°C
± (0.1 % Rn
(1)
± 0.05
Ω)
CONDITIONS
-55 °C to +155 °C
Vishay Sfernice
1000 h Pn at +70 °C
DIMENSIONS
in millimeters (inches)
A
D
D
C
B
E
E
SERIES /
CASE SIZES
RV 0505
RV 0603
RV 0805
RV 1206
A
MIN.
1.198
(0.047)
1.368
(0.054)
1.758
(0.069)
2.908
(0.114)
MAX.
1.502
(0.059)
1.672
(0.066)
2.062
(0.081)
3.212
(0.126)
MIN.
1.143
(0.045)
0.623
(0.025)
1.143
(0.045)
1.473
(0.058)
B
MAX.
1.397
(0.055)
0.877
(0.035)
1.397
(0.055)
1.727
(0.068)
MIN.
0.250
(0.010)
0.250
(0.010)
0.250
(0.010)
0.250
(0.010)
D/E
MAX.
0.510
(0.020)
0.510
(0.020)
0.510
(0.020)
0.510
(0.020)
MIN.
0.373
(0.015)
0.373
(0.015)
0.373
(0.015)
0.373
(0.015)
C
MAX.
0.627
(0.025)
0.627
(0.025)
0.627
(0.025)
0.627
(0.025)
POPULAR OPTION
AEC-Q200 moisture resistance
Option to order: 0058: specific production process to withstand 85 °C / 85 % RH at Pn/10
ENVIRONMENTAL TEST
TEST
Overload
Climatic sequences
(1)
Thermal shock
(1)
Load life
(1)
Resistance to solder heat
CONDITIONS
6.25 x rated power / 2 s (or 2 UL)
-55 °C / +155 °C
5 moisture cycles
-55 °C / +155 °C
5 cycles 30 min
+70 °C/Pn
1000 h
+260 °C/ 10 s
+40 °C / 93 % HR
Pn/10
AEC-Q200
(3)
85 °C / 85 % RH / Pn/10
1000 h
1000 h at + 155 °C
10 bends / 2 mm / 5 s
VALUES AND DRIFTS (ΔR/R ± %)
CECC REQUIREMENTS
TYPICAL PERFORMANCE
(2)
+ 0.05
Ω
0.05 % Rn
0.01 % Rn
(2)
0.1 % Rn
(2)
+ 0.05
Ω
0.05 % Rn
(2)
+ 0.05
Ω
0.1 % Rn
(2)
+ 0.05
Ω
0.05 % Rn
(2)
+ 0.05
Ω
0.1 % Rn
(2)
+ 0.05
Ω
0.5 % + 0.05
Ω
0.1 % Rn
(2)
+ 0.05
Ω
0.05 % Rn
(2)
+ 0.05
Ω
0.02 % Rn
(2)
0.02 % Rn
(2)
0.05 % Rn
(2)
0.02 % Rn
(2)
0.01 % Rn
(2)
Max. < 0.3 % + 0.05
Ω
0.05 % Rn
(2)
0.02 % Rn
(2)
Moisture resistance
(1)
High temperature storage
Bending
(1)
Notes
(1)
Test requiring parts to be mounted on PCB will be performed with the requirement that termination alloy will be the same as solder paste
alloy. Gold termination will be tested as B termination
(2)
Rn: nominal resistance
Pn: nominal power
(3)
Option to order: 0058
Revision: 04-Oct-2021
Document Number: 60022
2
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RV
www.vishay.com
SPECIFIC CONDITIONS DUE TO TERMINATION TYPE
TEST
Solderability
High T° reflow profile
Note
(1)
Rn: nominal resistance
Pn: nominal power
CONDITIONS
B; G
+235 °C/2 s
Sn60Pb40 alloy
N/A
N
+245 °C/3 s
Sn97Ag3 alloy
+255 °C/40 s
(on parts)
VALUES AND DRIFTS
VISHAY REQUIREMENTS
TYPICAL PERFORMANCE
Vishay Sfernice
VISUAL INSPECTION
0.02 % Rn
(1)
+ 0.05
Ω
0.01 % Rn
(1)
+ 0.05
Ω
PACKAGING INFORMATION
NUMBER OF PIECES PER PACKAGE
SIZE
0505
0603
0805
1206
WAFFLE PACK
(2" x 2")
100
100
140
100
TAPE AND REEL
MIN.
MAX.
4000
5000
4000
TAPE
WIDTH
DERATING CURVE
Axis Title
120
100
2nd line
Rated Power (%)
80
60
40
20
0
0
20
40
60 70 80
100
125 140 155
Ambient Temperature (°C)
10
100
1000
1st line
2nd line
10000
8 mm
(0.315”)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RV0505E1001DBT0099
R
V
0
SIZE
0505
0603
0805
1206
5
0
TCR
5
E
1
VALUE
0
0
1
D
B
T
0
0
9
9
GLOBAL
MODEL
TOLERANCE
B
= ± 0.1 %
D
= ± 0.5 %
F
=±1%
G
=±2%
J
=±5%
TERMINATION
B:
SnPb over
nickel barrier
N:
SnAg over
nickel barrier
G:
gold over
nickel barrier
PACKAGING
For more
information
see
“Codification
of packaging”
table
OPTION
Leave blank
if no option
E
= ± 25 ppm/°C
Y
= ± 10 ppm/°C
The first 3 digits
(2 digits are enough
for tolerance G and J)
are significant figures
and the last digit
specifies the number
of zeros to follow.
R designates
decimal point
10R0
= 10
Ω
3901
= 3900
Ω
1004
= 1 MΩ
B:
lead bearing version
N
and
G:
lead (Pb)-free / RoHS version
Historical Part Number Example: RV 0505 25 ppm 1K 0.5 % B TR R1016
PART NUMBER DESCRIPTION
(for information only)
RV
MODEL
0505
SIZE
25 ppm
TCR
1K
OHMIC VALUE
0.5 %
TOLERANCE
B
TERMINATION
TR
PACKAGING
R1016
OPTION
Revision: 04-Oct-2021
Document Number: 60022
3
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RV
www.vishay.com
CODIFICATION OF PACKAGING
CODE 18
WAFFLE PACK
W
WA
PLASTIC TAPE (Standard for all sizes.)
T
TA
TB
TC
TD
TE
TF
PT
PA
PB
PC
PD
PE
PF
100 min., 1 mult.
100 min., 100 mult.
250 min., 250 mult.
500 min., 500 mult.
1000 min., 1000 mult.
2500 min., 2500 mult.
Full tape (quantity depending on size of chips)
100 min., 1 mult.
100 min., 100 mult.
250 min., 250 mult.
500 min., 500 mult.
1000 min., 1000 mult.
2500 min., 2500 mult.
Full tape (quantity depending on size of chips)
100 min., 1 mult.
100 min., 100 mult. (available only in size 1206)
PACKAGING
Vishay Sfernice
PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes.)
Revision: 04-Oct-2021
Document Number: 60022
4
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
