REVISION AC
DO NOT
SCALE FROM
THIS PRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
FIG 2
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
(SEE TABLE 1)(SEE NOTES 12,13,14,15)
"A" mm
"B" mm
"C" mm
C
"D" mm
"E" mm
C
C
OVERALL CABLE LENGTH
CABLE CALLOUT
MILLIMETERS OF CABLE
178: CCA-178 (RG-178 COAXIAL CABLE)
0100 MIN. (SEE NOTE 8 & 9)
END 1 CONNECTOR
END 2 PLATING OPTION
-01BJ: SMA-J-C-X-ST-BH2 (SEE SHEET 3)
1: GOLD ALL COMPONENTS
-01BR: SMA-J-C-X-ST-BR2 (SEE SHEET 3)
2: GOLD / NICKEL COMBINATION
-01SB: SMA-J-C-X-ST-SB2 (SEE SHEET 3)
3: ALTERNATE GOLD / NICKEL
-01SR: SMA-J-C-X-ST-SR2 (SEE SHEET 3)
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
-02SJ: MCX-J-C-X-ST-CA2 (SEE SHEET 3)
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
*(LEAVE BLANK FOR -SING OR -XXXXXX
-02RP: MCX-P-C-XX-RA-CA2 (SEE SHEET 3)
END 2 PREPARATION)
-02SP: MCX-P-C-XX-ST-CA2 (SEE SHEET 4)
-03SP: MMCX-P-C-XX-ST-CA2 (SEE SHEET 4)
END 2 CONNECTOR OR PREPARATION
-01BJ: SMA-J-C-X-ST-BH2 (SEE SHEET 3)
-03RP: MMCX-P-C-X-RA-CA2 (SEE SHEET 4)
-01BR: SMA-J-C-X-ST-BR2 (SEE SHEET 3)
-04SP: BNC5-P-C-XX-ST-CA2 (SEE SHEET 4)
-01SB: SMA-J-C-X-ST-SB2 (SEE SHEET 3)
-04BJ: BNC5-J-C-XX-ST-BH2 (SEE SHEET 5)
-01SR: SMA-J-C-X-ST-SR2 (SEE SHEET 3)
-05SP: TNC-P-C-XX-ST-CA2 (SEE SHEET 5)
-02SJ: MCX-J-C-X-ST-CA2 (SEE SHEET 3)
-05BJ: TNC-J-C-XX-ST-BH2 (SEE SHEET 5)
-02RP: MCX-P-C-XX-RA-CA2 (SEE SHEET 3)
-06BJ: NTPE-J-C-XX-ST-BH2 (SEE SHEET 5)
-02SP: MCX-P-C-XX-ST-CA2 (SEE SHEET 4)
-07BJ: SMB5-J-C-XX-ST-CA2 (SEE SHEET 5)
-03SP: MMCX-P-C-XX-ST-CA2 (SEE SHEET 4)
-13GP: GRFS-P-C-X-ST-CA2 (SEE SHEET 5)
-03RP: MMCX-P-C-X-RA-CA2 (SEE SHEET 4)
-S7RP: SSMB-P-C-XX-RA-CA2 (SEE SHEET 6)
-04SP: BNC5-P-C-XX-ST-CA2 (SEE SHEET 4)
-S7SP: SSMB-P-C-XX-ST-CA2 (SEE SHEET 6)
-04BJ: BNC5-J-C-XX-ST-BH2 (SEE SHEET 5)
*
-V3SJ: MMCXV-J-C-XX-ST-CA2 (SEE SHEET 6)
*
-V3SP: MMCXV-P-C-XX-ST-CA2 (SEE SHEET 6)
-05SP: TNC-P-C-XX-ST-CA2 (SEE SHEET 5)
*
-V3RP: MMCXV-P-C-XX-RA-CA2 (SEE SHEET 6)
-05BJ: TNC-J-C-XX-ST-BH2 (SEE SHEET 5)
-06BJ: NTPE-J-C-XX-ST-BH2 (SEE SHEET 5)
END 1 PLATING OPTION
-07BJ: SMB5-J-C-XX-ST-CA2 (SEE SHEET 5)
1: GOLD ALL COMPONENTS
-13GP: GRFS-P-C-X-ST-CA2 (SEE SHEET 5)
2: GOLD / NICKEL COMBINATION
-S7RP: SSMB-P-C-XX-RA-CA2 (SEE SHEET 6)
3: ALTERNATE GOLD / NICKEL
-S7SP: SSMB-P-C-XX-ST-CA2 (SEE SHEET 6)
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
*
-V3SJ: MMCXV-J-C-XX-ST-CA2 (SEE SHEET 6)
(SEE SHEET 2 FOR PLATING SPECIFICS)
*
-V3SP: MMCXV-P-C-XX-ST-CA2 (SEE SHEET 6)
*
-V3RP: MMCXV-P-C-XX-RA-CA2 (SEE SHEET 6)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
* = NOT RELEASED FOR PRODUCTION
SEE NOTES 11-15, 17 & SHEET 4, FIG. 3)
(SEE FIG. 2) "C" FORMAT: X.X mm
(SEE FIG. 2) "B" FORMAT: X.X mm
(SEE FIG. 2) "A" FORMAT: X.X mm
RF178-XXXXX-XXXXXX-XXXX
C
NOTES:
RF178-02SJX-03RPX-XXXX SHOWN
FIG 1
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2).
(SEE TABLE 1 FOR SUBTRACTORS)
C
3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS.
C
4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1, THE TEST VOLTAGE FOR THE ASSEMBLY
SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING.
5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-RF-WI-3040-M.
LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS.
9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA.
10. MINIMUM BEND RADIUS FOR RG178 = 10.2 [.40].
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm.
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTRIC USE: A.
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B.
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C.
16. CONNECTORS TO BE ORIENTED ACCORDING TO CO-RF-WI-3048-M.
17. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED.
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
Pb THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
.X: 0.3 [.01]
2
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
SEE END 1 AND END 2 ASSEMBLY PRINTS
RF178 CABLE ASSEMBLY
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
BY:
TIM P.
SHEET
1
OF
6
REVISION AC
*
*
*
* = NOT RELEASED FOR PRODUCTION
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
RF178 CABLE ASSEMBLY
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
SHEET
2
OF
6
BY:
TIM P.
REVISION AC
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMA-J-C-X-ST-BH2
FOR ASSEMBLY INSTRUCTIONS)
-01BJ
-01BR
(REVERSED POLARITY)
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No.
SMA-J-C-X-ST-BR2
FOR ASSEMBLY INSTRUCTIONS)
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMA-J-C-X-ST-SB2
FOR ASSEMBLY INSTRUCTIONS)
-01SB
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-BH2)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-X-ST-BH2
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-BR2)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-X-ST-BR2
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-SB2)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-X-ST-SB2
THAT APPLY MUST BE VERIFIED.
(SEALED STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMA-J-C-X-ST-SR2
FOR ASSEMBLY INSTRUCTIONS)
-01SR
(REVERSED POLARITY)
(STRAIGHT JACK)
(USE DRAWING No.
MCX-J-C-X-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-02SJ
(RIGHT ANGLE PLUG)
(USE DRAWING No.
MCX-P-C-XX-RA-CA2
FOR ASSEMBLY INSTRUCTIONS)
-02RP
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MCX-P-C-H-RA-CA2)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-SR2)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-X-ST-SR2
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MCX-J-C-H-ST-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON MCX-J-C-X-ST-CA2
THAT APPLY MUST BE VERIFIED.
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MCX-P-C-HN-RA-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON MCX-P-C-XX-RA-CA2
THAT APPLY MUST BE VERIFIED.
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
RF178 CABLE ASSEMBLY
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
BY:
TIM P.
SHEET
3
OF
6
REVISION AC
(STRAIGHT PLUG)
-02SP
(STRAIGHT PLUG)
(USE DRAWING No.
MMCX-P-C-XX-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-03SP
(RIGHT ANGLE PLUG)
(USE DRAWING No. MMCX-P-C-X-RA-CA2
FOR ASSEMBLY INSTRUCTIONS)
-03RP
(USE DRAWING No.
MCX-P-C-XX-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MCX-P-C-H-ST-CA2)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MCX-P-C-HN-ST-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON MCX-P-C-XX-ST-CA2
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCX-P-C-H-ST-CA2)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MMCX-P-C-HN-ST-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON MMCX-P-C-XX-ST-CA2
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCX-P-C-H-RA-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON MMCX-P-C-X-RA-CA2
THAT APPLY MUST BE VERIFIED.
(STRAIGHT PLUG)
(USE DRAWING No. BNC5-P-C-XX-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-04SP
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC5-P-C-HN-ST-CA2)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC5-P-C-GN-ST-CA2)
RF178-02SPX-102148-XXXX SHOWN
FIG 3
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
RF178 CABLE ASSEMBLY
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
BY:
TIM P.
SHEET
4
OF
6
REVISION AC
(STRAIGHT BULKHEAD JACK)
-04BJ
(STRAIGHT PLUG)
(USE DRAWING No. TNC-P-C-XX-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-05SP
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. TNC-J-C-XX-ST-BH2
FOR ASSEMBLY INSTRUCTIONS)
-05BJ
(USE DRAWING No. BNC5-J-C-XX-ST-BH2
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
BNC5-J-C-HN-ST-BH2)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
BNC5-J-C-GN-ST-BH2)
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-P-C-HN-ST-CA2)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-P-C-GN-ST-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON TNC-P-C-XX-ST-CA2
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-J-C-HF-ST-BH2)
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-J-C-HN-ST-BH2)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-J-C-GN-ST-BH2)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-J-C-GF-ST-BH2)
NOTE: ALL CRITICAL DIMENSIONS ON TNC-J-C-XX-ST-BH2
THAT APPLY MUST BE VERIFIED.
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
BNC5-J-C-GF-ST-BH2)
8: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC5-J-C-HF-ST-BH2)
NOTE: ALL CRITICAL DIMENSIONS ON BNC5-J-C-XX-ST-BH2
THAT APPLY MUST BE VERIFIED.
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. NTPE-J-C-XX-ST-BH2
FOR ASSEMBLY INSTRUCTIONS)
-06BJ
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMB5-J-C-XX-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-07BJ
(STRAIGHT PLUG)
(USE DRAWING No. GRFS-P-C-X-ST-CA2
FOR ASSEMBLY INSTRUCTIONS)
-13GP
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
SMB5-J-C-HN-ST-CA2)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: GRFS-P-C-H-ST-CA2)
NOTE: ALL CRITICAL DIMENSIONS ON GRFS-P-C-X-ST-CA2
THAT APPLY MUST BE VERIFIED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-J-C-HN-ST-BH2)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-J-C-GN-ST-BH2)
NOTE: ALL CRITICAL DIMENSIONS ON NTPE-J-C-XX-ST-CA2
THAT APPLY MUST BE VERIFIED.
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
SMB5-J-C-GN-ST-CA2)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N:
SMB5-J-C-GF-ST-CA2)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
8: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMB5-J-C-HF-ST-CA2)
RF178 CABLE ASSEMBLY
BY:
TIM P.
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
SHEET
5
OF
6
京公网安备 11010802033920号
EEWORLD
