DSP can work at a frequency of 150MHz. In order to give full play to its high-speed running characteristics, the FLASH program content is generally copied to the external high-speed SRAM for running. ...
[i=s]This post was last edited by dcexpert on 2021-6-1 21:47[/i]ODROID-GO handheld game console emulator based on ESP32. Many handheld game consoles on Taobao are also based on this solution.Hardware ...
[i=s]This post was last edited by jinglixixi on 2021-9-17 11:29[/i]Previously, we have introduced the detection effect of capacitive-contactless liquid level sensors on different container materials. ...
TVS tube selection calculation, the dissipated power of the TVS component is greater than the waveform power according to this standard? I don't understand the power calculation of the test waveform h...
#includereg52.h //Include the header file. Generally, no modification is required. The header file contains the definition of special function registers.
sbit LED1 = P2^0;sbit LED = P2^1; //Define LED...
S32K144 reads and writes NorFlash by itself, and is directly compiled in NXP official compiler S32 Design Studio for ARM Version 2018.R1 (needs to be patched and updated to RTM2.0 version SDK). The s...[Details]
Signal source analyzer is a commonly used instrument for measuring crystal oscillators, PLLs, clock circuits, and phase noise. As a comprehensive measuring instrument, signal source analyzer pro...[Details]
The LT
®
3512 is a high voltage, monolithic switching regulator specifically designed for isolated flyback topologies. No third winding or optoisolator is required for regulation because ...[Details]
Problems: When using the AVR parallel port download cable, in order to save costs and facilitate use, the pins on the parallel port and the download program are connected in series with a 330 ohm r...[Details]
1 Introduction
The music editing generator based on RTX51 uses AT89S52 single-chip microcomputer as the control core. The operator can input any music in the agreed format through the 4×4 matr...[Details]
Most exploration and observation work is carried out in harsh environments, with high requirements for data accuracy and real-time performance, and in most cases, multi-parameter synchronous measureme...[Details]
1 Introduction The data collection part with MSC1210Y5 as the core is placed underwater and works in an unattended self-contained mode. Due to the harsh marine environment, the instrument must have ...[Details]
Valve-regulated sealed lead-acid batteries (hereinafter referred to as valve-regulated batteries) are widely used in practical applications due to their features of saving investment, easy installat...[Details]
1. Active Carbon Activated
carbon is made from wood sawdust or coconut shells and is extremely finely pulverized. It has a large surface area and is highly adsorbent, and can absorb a large amo...[Details]
1. Requirements for inverters in off-grid photovoltaic power generation systems
Solar photovoltaic power generation is a new power generation technology that directly converts solar radiat...[Details]
This circuit is a weigh scale system built using the AD7192. The AD7192 is an ultralow noise, low drift, 24-bit Σ-Δ converter with an internal PGA. The device simplifies weigh scale design by havin...[Details]
A frequency meter is a measuring instrument that uses counting method, width measurement method and other methods to measure the frequency of a signal. It is mainly composed of four parts: time base ...[Details]
I. Overview Common infrared remote controls: air conditioner remote control, TV remote control. 1.1 What is infrared? The light visible to the human eye is arranged from long to short in wavelength...[Details]
Castrol joins hands with Beijing Jianheng Certification Center and Zhonghong Science and Technology to launch immersion thermal management energy storage solution
(October 16, 2024, Beijing,...[Details]