-
Thanks to the strong support of the Korean government, Korean companies are far ahead in the battery technology market. As electric vehicles (EV) become more popular, Korean EV battery manufacturers ...[Details]
-
Where does the electric energy of new energy vehicle motors come from? The electric energy of motors is converted by the braking energy feedback system and fed back to the AC power grid for use by ...[Details]
-
1. Fault phenomenon: Fault reported by customer: The instrument can be powered on normally, but an error message will appear during use, indicating that the SOURCE is unleveled. 2. Determine the fa...[Details]
-
The following DSP power-on boot debugging experience is based on the following premise:
MP/MC=0 mode is used, the bootloader solidified in ROM is used, and the flash is mapped in the data spac...[Details]
-
Large-screen displays are increasingly used in our daily lives, and the technologies for large-screen displays have also improved. At present, LCD displays are highly regarded for their excellent ...[Details]
-
1. Hardware relationship
Hardware Hookup
Related pin definition
2. Assembly knowledge
...[Details]
-
The first end must be separated. Measurement method one: (1) Gear selection: DC 50μ (2) Measurement process: 1. Connect one lead wire of each winding in the three windings together, and the remai...[Details]
-
1. Summary
The sensor system of autonomous vehicles generally includes four types of radars: Lidar, mmWave Radar, Ultrasonic Radar and Infrared Radar. Currently, Lidar and mmWave Radar are bas...[Details]
-
A converter is a device that converts one signal into another. A signal is a form or carrier of information. In automated instrumentation and automatic control systems, one signal is often converte...[Details]
-
According to the test standards, optical fiber testing is divided into primary testing and secondary testing. The primary testing is also the basic testing, which is a double-ended test performed usi...[Details]
-
We know that bandwidth limitation will have the following effects on signal capture: 1. Slowing down the rising edge of the measured signal. 2. Reducing the frequency component of the signal. 3. Disto...[Details]
-
Recently, DJI launched a controller and image transmission system for first-person view (FPV) drones, which is equipped with FPV flight goggles, image transmission modules, remote controllers, camera...[Details]
-
As the types of low-level equipment in industrial fields increase and their functions become more powerful, fieldbus technology has been widely used. DeviceNet technology based on the CAN bus...[Details]
-
Preface When using the ST FOC motor library , when using the Hall signal as the position signal, it is necessary to input the synchronous electrical angle data. This data is input according to the ...[Details]
-
Emerson's NI mioDAQ is its most advanced bus-powered USB DAQ device designed to help engineering teams simplify installation and improve inspection efficiency.
Shanghai, China, Octob...[Details]
Toshiba Photorelays TLP3547 Review
京公网安备 11010802033920号
EEWORLD