After the device is reset (RS=0), the serial port initialization process is as follows: (1) Set XRST=RRST=0 in SRCR[1,2] (if the reset is generated by the device, this step is not required); (2) Progr...
The 5G wireless revolution is bringing big changes to the world of RF design, and the power amplifiers for cell phones and radio base stations are no exception. First, the power amplifier chips in 5G ...
This sharing uses SPI to drive the OLED display. The OLED display controller is SSD1306 , which controls the 128X64 dot matrix display.The structure of SSD1306 is as follows:GPIO can be used to simula...
When designing, I need to use some schematics provided by the component manufacturer, but unfortunately they are in DSN format and cannot be opened by AD16. Please help convert the DSN format into the...
In a project, the author came into contact with such a communication system. The communication architecture of the entire system is roughly as shown in the figure below, a typical one-master-multiple-...
Power tools have evolved significantly over the past century. Today, they are cordless, lightweight, and battery-powered, making them a great addition to our lives. So what are the factors driving the...