Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
Date:
B32231
May 2009
The following products presented in this data sheet are being withdrawn.
Ordering Code
B32231D1334K000
B32231D1334J000
B32231D1154K000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Ordering Code
B32231D6224J000
B32231D6154K000
B32231D6154J000
B32231D6104K000
B32231D6104J000
B32231D3684K000
B32231D3684J000
B32231D3474K000
B32231D3474J000
B32231D3334K000
B32231D3334J000
B32231D3225K000
B32231D3225J000
B32231D3224K000
B32231D3224J000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Metallized polyester film capacitors (MKT)
General purpose (wound)
B32231
Typical applications
Smoothing
Filtering
Climatic
Max. operating temperature: 100
°C
Climatic category (IEC 60068-1): 40/100/21
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Flat winding
Insulating sleeve
Face ends sealed with epoxy resin
Terminals
Central axial wire leads, lead-free tinned
Marking
Manufacturer, series number,
rated capacitance (coded),
capacitance tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode
Bulk (untaped)
Dimensional drawing
Dimensions in mm
Width w
max
Lead diameter d
1
≤6.0
0.6
>6.0 ... 13.0
0.8
When bending leads take care to leave a
clearance of 1 mm to the capacitor body.
Please read
Cautions and warnings
and
Important notes
at the end of this document.
Page 2 of 19