Glenair’s new 1000 Hour Grey over stainless steel.
Glenair’s standard olive drab zinc-nickel finish.
Glenair’s standard black zinc-nickel finish.
Glenair’s RoHs compliant black zinc-nickel.
Glenair’s standard black cadmium over stainless steel.
Glenair’s standard olive drab cadmium over stainless steel.
1000
1000
1000
1000
500
1000
2000
TABLE I - BACKSHELL INTERFACE DIMENSIONS
A
C*
D
08
E
08
F
08 [9]
G
H
09 [A]
08
08 [A]
03
10
10 [B]
12
12 [7] 12
14
14 [12] 14
16
16 [19] 16
18 [27]
18
20 [37]
20
22
22
22 [H]
24
61
24 [J]
25 [G]
24
28
28
32
32
36
36
40
40
40
44
44
48
48
33 [J]
36
29 [H]
32
28
24
24
24 [25] 23 [F]
25 [J]
24
24
22
22
22 [23]
23 [H]
24
20
20
20 [21]
21 [G]
19 [E]
20 [G]
22
22
22
18
18
18 [19]
19 [F]
17 [D]
18 [F]
20
20
20
16
16 [17]
17 [E]
15 [C]
16 [E]
18
18
18
12
14
12 [13]
13 [C]
11 [A]
14 [15]
15 [D]
13 [B]
14 [D]
16
16
16 [17]
14 [15]
14
14
12
12
10
10
10 [11]
11 [B]
12 [13]
10
11
10
10
J
K
08
L
08
S
08
.770 (19.6)
.890 (22.6)
.890 (22.6)
1.020 (25.9)
1.020 (25.9)
1.150 (29.2)
1.150 (29.2)
1.260 (32.0)
1.230 (31.2)
1.400 (35.6)
1.360 (34.5)
1.530 (38.9)
1.480 (37.6)
1.600 (40.6)
(40.6)
(49.3)
.820 (20.8)
1.060 (26.9)
.820 (20.8)
.940
1.170
.940
1.060
1.290
1.060
(23.8)
(29.7)
(23.8)
(26.9)
(32.7)
(26.9)
1.170 (29.7)
1.420 (36.1)
1.170 (29.7)
1.290 (32.7)
1.540 (39.1)
1.420 (36.0)
1.670 (42.4)
1.540 (39.1)
2.010 (51.1)
1.840 (46.7)
1.970 (50.0)
2.090 (53.1)
2.280 (57.9)
2.340 (59.4)
2.340 (59.4)
2.530 (64.3)
2.590 (65.8)
2.590 (65.8)
2.780 (70.6)
2.910 (73.9)
3.030 (77.0)
3.160 (80.3)
3.220 (81.8)
3.410 (86.6)
1.600
(43.9)
(43.9) 1.940
(43.2)
(42.4)
(49.3)
(46.2)
1.940
1.970 (50.0)
2.190 (55.6) 2.190
2.220 (56.4)
2.440 (62.0) 2.440
2.440
2.47 (62.7)
2.690
2.690
2.720 (69.1)
2.930
2.970 (75.4)
1.730
1.730
1.700
1.670
1.940
1.820
3.220 (81.8)
1.660 (42.2)
2.120 (53.8)
(49.3)
2.010 (51.1)
(55.6)
2.260 (57.4)
(62.0)
(62.0)
2.530 (64.3)
(68.3)
(68.3)
3.040 (77.2)
(74.4)
* Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development.
BACKSHELL INTERFACE STANDARDS (See pages 15-17 for more information)
You can use the 1 GHz to 10 GHz bandwidth of the MSO6B to troubleshoot and verify high-speed designs. The MSO6B's leading low-noise performance and maximum 50 GS/s sampling rate can help you achieve h...
I have a radio module, and I borrowed the 51 MCU routines to write a small program for 430. Use digital tube display. Just after I finished writing it, it was wiped out again. I cried. I have to write...
For the push-pull topology in the figure below, the battery voltage input is about 40 volts. For example, when the lower tube is turned on and the upper tube is turned off, it works normally. But when...
[i=s]This post was last edited by damiaa on 2021-11-30 20:53[/i][Free trial of Pingtouge Bluetooth Mesh Gateway Development Kit] + Gateway module cloud platform and problem solving supplement
I have b...
Analog Dialogue is a free technical magazine published by ADI. It has been published monthly since 1967, the second year after the company was founded. Analog Dialogue serves as a forum for everyone t...
Models translate vision and language into actions.
On July 28, Google DeepMind launched a new robot model, Robocs Transfmer 2 (RT-2).
This is a new vision-language-action (VLA) model that...[Details]
introduction In the 21st century, mankind will face major challenges in achieving sustainable economic and social development. Under the dual constraints of limited resources and environmental prote...[Details]
High-
brightness
LEDs are increasingly being used in lighting applications. This article describes a simple "momentary lighting" that uses only a few components. Three LEDs are suppli...[Details]
With the development of information science and microelectronics technology, temperature monitoring can be automated and intelligentized by using modern technology. The multi-channel wireless tempe...[Details]
Recently, The Information released a report pointing out that Waymo's self-driving car road tests are causing a lot of trouble for local people, and that some driving habits are very different from t...[Details]
One of the important constraints in IC design is achieving the best combination of power, performance, and area (PPA). This article examines the components and design of a currently in-production Tru...[Details]
To produce high-quality LED displays, it is necessary to do a good job of technical control in the following aspects:
1. Anti-static LED display assembly factories should have good anti-static ...[Details]
Recently, Qorvo and Active-Semi held a press conference in Beijing. This was also the first appearance of Active Semi after being acquired by Qorvo. Larry Blackledge, general manager of Qorvo's progr...[Details]
Born for the Internet of Things , 5G is known as the key engine driving the second take-off of the Internet, and its market application space is also broader. At present, 5G research is becoming mo...[Details]
1. All GPIOs of STM32 can be used as input terminals of external interrupt sources to capture external signals. They can be configured as falling edge interrupt, rising edge interrupt and rising and ...[Details]
There must be many people who have heard of embedded and microcontroller, but when they first came into contact, I wonder if you have heard of the saying that embedded is microcontroller. In fact, th...[Details]
Commvault (NASDAQ: CVLT), a recognized leader in software for managing data in the global cloud and on-premises environments, today announced new enhancements to the Hedvig Distributed Storage Platfo...[Details]
According to Yonhap News Agency, SK Hynix, South Korea's second largest chipmaker, released its second quarter financial report on July 27. Thanks to the strong demand for memory chips in the global ...[Details]
Overview of CMOS and CCD Image Sensors
With the rise of various consumer electronics, image sensors have become one of the most dazzling star products in the semiconductor industry. Am...[Details]
As power levels increase and modern power systems become more complex, the demands on high-voltage systems have changed significantly. To effectively meet these demands, it is necessary to us...[Details]