Cree
®
LED Module LMH6
with Cree TrueWhite
®
Technology
Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class LED
lighting from Cree. The LMH series continues Cree’s history of innovation in LEDs for lighting applications and
provides a comprehensive solution including patented Cree TrueWhite
®
Technology to achieve an industry-leading
combination of light quality and efficacy. This versatile LED lighting module allows design flexibility with the
beautiful color and efficacy of Cree TrueWhite Technology.
A comprehensive design guide and solid-model STEP files are available through the Cree Module sales team.
This data sheet is intended to introduce you to the features and benefits of the LMH6 module. The
design guide
and solid model must be referenced for the thermal, mechanical and optical requirements of a successful LMH6
product design.
Data Sheet
FEATURES
•
•
•
•
•
•
•
•
•
•
Cree TrueWhite Technology
2000 & 2900 lm @ 3000-K & 4000-K CCT
DALI or 1–10-V dimming to 5% of rated light output
Comprehensive solution with driver electronics, optics and thermals
Snap-lock tabs for easy trim mounting
Designed to last at least 50,000 hours at L
70
Cree IES LM-80 data in support of U.S. DOE ENERGY STAR
®
qualification
The LMH6 (230-V) complies with multiple international standards
Integral splice compartment
Both Asian and European Union wire access plates supplied
MH6 Rev 0B
The Cree LED Module LMH6 with Cree TrueWhite Technology is the ideal choice for commercial lighting applications
where high CRI, luminous flux and efficacy are required, such as restaurants, retail and hospitality lighting.
Cree TrueWhite technology:
•
•
•
•
A better way to generate white light that utilizes a patented mixture of unsaturated yellow and saturated red
LEDs.
Proprietary optical system utilizes a unique combination of reflective and refractive optical components to
achieve a uniform, comfortable appearance. Pixelation and direct view of LEDs is eliminated.
Technology benefit – high CRI and efficacy allows customers to avoid making tradeoffs between energy
efficiency and light quality as compared to other lighting alternatives.
Marketing benefit – Cree logo on lens enables brand marketing value on final design.
CLM-DS04-L
Data Sheet:
DALI Features
•
•
•
DALI (Digital Addressable Lighting Interface) dimming
DALI device type 1 (IEC 62386 Part 102) for the AC/DC power supply (DALI version 2006)
Onboard thermal management
Subject to change without notice.
www.cree.com/modules
1
Characteristics
The following table provides several base order codes for the Cree LED Module LMH6, as well as a description of the
order-code nomenclature.
CCT
(K)*
4000
4000
3000
3000
4000
4000
3000
3000
Nominal
Luminous
Flux (lm)
2000
2900
2000
2900
2000
2900
2000
2900
Input
Power
(W)
27
37
27
37
27
37
27
37
Input Voltage
(V)/Freq (Hz)**
230/50
230/50
230/50
230/50
230/50
230/50
230/50
230/50
Power
Factor
>.90
>.90
>.90
>.90
>.90
>.90
>.90
>.90
CRI
>90
>90
>90
>90
>90
>90
>90
>90
Dimming
DALI
DALI
DALI
DALI
1–10 V
1–10 V
1–10 V
1–10 V
Order Code
LMH060-2000-40F9-20200TW
LMH060-2900-40F9-20200TW
LMH060-2000-30F9-20200TW
LMH060-2900-30F9-20200TW
LMH060-2000-40F9-20300TW
LMH060-2900-40F9-20300TW
LMH060-2000-30F9-20300TW
LMH060-2900-30F9-20300TW
* Refer to section below on chromaticity for more details
** Input range is 220–240 V / 50–60 Hz
Note: Cree maintains a tolerance of +/- 7% on flux and power measurements
Form Factor - Light Engine
units = mm
Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree
®
, the Cree logo and TrueWhite
®
are registered
trademarks of Cree, Inc. ENERGY STAR
®
is a registered trademark of the U.S.
Environmental Protection Agency.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
2
CLM-DS04-LMH6 Rev 0A
Form Factor - Power Supply
units = mm
Thermal Management Guidelines
Acceptable ambient starting and operating temperatures of the
Cree LED Module LMH6 are between 0°C and 40°C. (The lifetime
and performance estimates described in this document require
that the Tc limit stated in this Thermal Management Guidelines
section is adhered to and only the modifications described in this
document are implemented.)
The Cree LED Module LMH6 is designed to perform in a variety of
non-IC environments; however, the LED module lifetime is highly
dependent upon the Tc (case temperature). To achieve lifetime
and performance estimates and to maintain the warranty, the final
design cannot exceed 70°C at thermal equilibrium, based on the
Tc point (shown in the figure on the right) where the thermocouple
is placed and tested in situ.
Tc
LOCATIO
Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree
®
, the Cree logo and TrueWhite
®
are registered
trademarks of Cree, Inc. ENERGY STAR
®
is a registered trademark of the U.S.
Environmental Protection Agency.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
3
CLM-DS04-LMH6 Rev 0A
Photometry
The following photometry results are design values. Absolute photometric testing at independent testing labs can be
expected to vary by ± 7%.
Candela Table
Angle
0
5
15
25
35
45
55
65
75
85
90
LMH060-2900
1266
1261
1220
1119
950
783
488
242
LMH060-2000
987
979
933
847
704
520
333
127
55
3
1
74
7
1
Zonal Lumens Summary
LMH060-2900
Zone
0-30
0-40
0-60
0-90
0-180
Lumens
979
1572
2574
2916
2916
% Lamp
-
-
-
-
-
% Fixt
34
54
88
100
100
Zonal Lumens Summary
LMH060-2000
Zone
0-30
0-40
0-60
0-90
0-180
Lumens
745
1184
1885
2074
2074
% Lamp
-
-
-
-
-
% Fixt
35
57
90
100
100
Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree
®
, the Cree logo and TrueWhite
®
are registered
trademarks of Cree, Inc. ENERGY STAR
®
is a registered trademark of the U.S.
Environmental Protection Agency.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
4
CLM-DS04-LMH6 Rev 0A
Chromaticity
Secondary optics added to the module will reduce the light output and could also alter the color characteristics of
the final luminaire design. The Cree LED Module LMH6 provides high color consistency around the specified color
temperature. Individual LEDs are tested and matched in order to meet the designed chromaticity specification, which
is defined by the following bounding coordinates.
Color Temp
Code
CCT
(K)
Ccx
0.3722
Ccy
0.3739
0.3706
0.3857
0.3892
0.3858
0.3823
0.3979
0.4016
0.3969
0.3932
0.4093
0.4131
0.4037
0.4000
0.4164
0.4203
40F
4000
0.3822
0.3915
0.3813
0.3974
0.4074
0.4174
0.4073
0.4236
0.4334
0.4442
0.4342
0.4473
0.4569
0.4684
0.4586
35F
3500
30F
3000
27F
2700
Order Codes
Series
LMH = LED Module Type
Luminous flux
2000 = 2000 lumens nominal
CRI
9 = 90+ CRI
Internal code
TW = TrueWhite
SSSSSS-LLLL-CCCC-NNNNNNN
Power supply
2 = 230-V
Color temp
30F = 3000-K CCT
Form factor
Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree
®
, the Cree logo and TrueWhite
®
are registered
trademarks of Cree, Inc. ENERGY STAR
®
is a registered trademark of the U.S.
Environmental Protection Agency.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
5
CLM-DS04-LMH6 Rev 0A
京公网安备 11010802033920号
EEWORLD
