[i=s]This post was last edited by VincentLee90 on 2019-5-18 22:49[/i] [align=left][size=14px][font=Tahoma][size=3]Some friends asked me how to design a filter with gain before? What if the normalized ...
I am using Altium Designer to design a Ku-band PCB. The chip package size is relatively small, and the spacing between pads is also small. If I import the schematic directly into the PCB, I will find ...
I originally wanted to test the low power consumption, but when I saw that the board had to be cut, I decided to leave it for later and run the external flash function first.
1. Determine the hardware...
Principle Analysis
First, let's talk about the program image. A complete program image can be divided into two parts: "interrupt vector table" and "logic program" (let's name it this way for the conve...
In my second review, I was originally planning to do some hardware development on the AWR1443 EVM board, but after two days, I found that it could not be used normally, probably due to the computer or...