Freescale Semiconductor
Product Brief
Document Number:KL15PB
Rev. 2, 6/2012
Supports all KL14 and KL15 devices
KL14/KL15 Product Brief
Contents
1 Kinetis L Series
The Kinetis L series is the most scalable portfolio of ultra low-
power, mixed-signal ARM Cortex-M0+ MCUs in the
industry. The portfolio includes 5 MCU families that offer a
broad range of memory, peripheral and package options.
Kinetis L Series families share common peripherals and pin-
counts allowing developers to migrate easily within an MCU
family or between MCU families to take advantage of more
memory or feature integration. This scalability allows
developers to standardize on the Kinetis L Series for their end
product platforms, maximising hardware and software reuse
and reducing time-to-market.
Features common to all Kinetis L series families include:
• 48 MHz ARM Cortex-M0+ core
• High-speed 12/16-bit analog-to-digital converters
• 12-bit digital-to-analog converters for all series except
for KLx4 family
• High-speed analog comparators
• Low-power touch sensing with wake-up on touch from
reduced power states for all series except for KLx4
family
• Powerful timers for a broad range of applications
including motor control
• Low power focused serial communication interfaces
such as low power UART, SPI, I2C etc.
• Single power supply: 1.71V - 3.6V with multiple low-
power modes support single operation temperature: -40
~ 105 °C (exclude CSP package)
© 2011–2012 Freescale Semiconductor, Inc.
Preliminary
General Business Information
1
2
3
4
5
6
Kinetis L Series.........................................................1
KL14/KL15 Sub-Family Introduction......................3
Block Diagram..........................................................3
Features.....................................................................6
Power modes...........................................................17
Revision History.....................................................19
Kinetis L Series
Kinetis L series MCU families combine the latest low-power innovations with precision mixed-signal capability and a broad
range of communication, connectivity, and human-machine interface peripherals. Each MCU family is supported by a
market-leading enablement bundle from Freescale and numerous ARM 3rd party ecosystem partners. The KL0x family is the
entry-point to the Kinetis L series and is compatible with the 8-bit S08PT family. The KL1x/2x/3x/4x families are compatible
with each other and their equivalent ARM Cortex-M4 Kinetis K series families - K10/20/30/40.
Family
Program
Flash
Packages
64-121pin
64-121pin
32-121pin
32-80pin
16-48pin
Mixed signal
Key Features
KL4x Family
128-256KB
KL3x Family
64-256KB
KL2x Family
32-256KB
KL1x Family
32-256KB
KL0x Family
8-32KB
Low power
USB
Segment LCD
Figure 1. Kinetis L series families of MCU portfolio
All Kinetis L series families include a powerful array of analog, communication and timing and control peripherals with the
level of feature integration increasing with flash memory size and the pin count. Features within the Kinetis L series families
include:
• Core and Architecture:
• ARM Cortex-M0+ Core delivering 1.77 CoreMark/MHz from single-cycle access memories
• Single-cycle access to I/O and critical peripherals: Up to 50 percent faster than standard I/O, improves
reaction time to external events allowing bit banging and software protocol emulation
• Two-stage pipeline: Reduced number of cycles per instruction (CPI), enabling faster branch instruction and
ISR entry
• Excellent code density vs. 8-bit and 16-bit MCUs - reduces flash size, system cost and power consumption
• Optimized access to program memory: Accesses on alternate cycles reduces power consumption
• 100 percent compatible with ARM Cortex-M0 and a subset ARM Cortex-M3/M4: Reuse existing
compilers and debug tools
• Simplified architecture: 56 instructions and 17 registers enables easy programming and efficient packaging
of 8/16/32-bit data in memory
• Linear 4 GB address space removes the need for paging/banking, reducing software complexity
• ARM third-party ecosystem support: Software and tools to help minimize development time/cost
• Micro Trace Buffer: Lightweight trace solution allows fast bug identification and correction
• BME: Bit manipulation engine reduces code size and cycles for bit oriented operations to peripheral registers
eliminating traditional methods where the core would need to perform read-modify-write instructions.
• Up to 4-channel DMA for peripheral and memory servicing with minimal CPU intervention
• Broad range of performance levels with CPU frequencies up to 48 MHz
• Ultra low-power:
• Next-generation 32-bit ARM Cortex M0+ core: 2x more CoreMark/mA than the closest 8/16-bit architecture
KL14/KL15 Product Brief, Rev. 2, 6/2012
2
Preliminary
General Business Information
Freescale Semiconductor, Inc.
KL14/KL15 Sub-Family Introduction
•
•
•
•
•
•
•
• Multiple flexible low-power modes, including new operation clocking option which reduces dynamic power by
shutting off bus and system clocks for lowest power core processing. Peripherals with an alternate asynchronous
clock source can continue operation.
• UART, SPI, I2C, ADC, DAC, TPM, LPT and DMA support low-power mode operation without waking up the
core
Memory:
• Scalable memory footprints from 8 KB flash / 1 KB SRAM to 128 KB flash / 16 KB SRAM
• Embedded 64 B cache memory for optimizing bus bandwidth and flash execution performance (feature not
available on KL02 family)
Mixed-signal analog:
• Fast, high precision 16-, or 12-bit ADCs with optional differential pairs, 12-bit DACs, high speed comparators.
Powerful signal conditioning, conversion and analysis capability with reduced system cost
Human Machine Interface (HMI):
• Optional capacitive Touch Sensing Interface with full low-power support and minimal current adder when
enabled
Connectivity and Communications:
• All UARTs support DMA transfers, and can trigger when data on bus is detected, UART0 supports 4x to 32x
over sampling ratio. Asynchronous transmit and receive operation for operating in STOP/VLPS modes.
• Up to two SPIs
• Up to two IICs
• Full-speed USB OTG controller with on-chip transceiver
Reliability, Safety and Security:
• Internal watchdog
Timing and Control:
• Powerful timer modules which support general purpose, PWM, and motor control functions
• Periodic Interrupt Timer for RTOS task scheduler time base or trigger source for ADC conversion and timer
modules
System:
• GPIO with pin interrupt functionality
• Wide operating voltage range from 1.71 V to 3.6 V with flash programmable down to 1.71 V with fully
functional flash and analog peripherals
• Ambient operating temperature ranges from -40 °C to 105 °C
The device is highly-integrated, market leading ultra low power 32-bit microcontroller based on the enhanced Cortex-M0+
(CM0+) core platform. The family derivatives feature:
• Core platform clock up to 48 MHz, bus clock up to 24 MHz
• Memory option is up to 128 KB Flash and 16 KB RAM
• Wide operating voltage ranges from 1.71V to 3.6V with full functional Flash program/erase/read operations
• Multiple package options from 32-pin to 80-pin
• Ambient operating temperature ranges from –40 °C to 105 °C
The family acts as an ultra low power, cost effective microcontroller to provide developers an appropriate entry-level 32-bit
solution. The family is next generation MCU solution for low cost, low power, high performance devices applications. It’s
valuable for cost-sensitive, portable applications requiring long battery life-time.
2 KL14/KL15 Sub-Family Introduction
3 Block Diagram
The below figure shows a superset block diagram of the device. Other devices within the family have a subset of the features.
KL14/KL15 Product Brief, Rev. 2, 6/2012
Freescale Semiconductor, Inc.
Preliminary
General Business Information
3
Block Diagram
Kinetis KL14 Family
ARM
®
Cortex™-M0+
Core
Debug
interfaces
Interrupt
controller
MTB
System
Internal
watchdog
Memories and
Memory Interfaces
Program
flash
Clocks
Phase-
locked loop
Frequency-
locked loop
Low/high
frequency
oscillator
DMA
RAM
BME
Internal
reference
clocks
and Integrity
Internal
watchdog
Security
Analog
12-bit ADC
x1
Timers
Timers
1x6ch+2x2ch
Low
power timer
x1
Communication
Interfaces
I
C
x2
Low power
UART
x1
SPI
x2
UART
x2
2
Human-Machine
Interface (HMI)
GPIOs
with
interrupt
Analog
comparator
x1
6-bit DAC
Periodic
interrupt
timers
RTC
LEGEND
Migration difference from KL04 family
Figure 2. KL14 family block diagram
KL14/KL15 Product Brief, Rev. 2, 6/2012
4
Preliminary
General Business Information
Freescale Semiconductor, Inc.
Kinetis KL15 Family
ARM Cortex™-M0+
Core
Debug
interfaces
Interrupt
controller
MTB
®
Block Diagram
System
Internal
watchdog
Memories and
Memory Interfaces
Program
flash
Clocks
Phase-
locked loop
Frequency-
locked loop
Low/high
frequency
oscillator
DMA
RAM
BME
Internal
reference
clocks
and Integrity
Internal
watchdog
Security
Analog
16-bit ADC
x1
Timers
Timers
1x6ch+2x2ch
Low
power timer
x1
Communication
Interfaces
I
C
x2
Low power
UART
x1
SPI
x2
UART
x2
2
Human-Machine
Interface (HMI)
GPIOs
with
interrupt
TSI
Analog
comparator
x1
6-bit DAC
Periodic
interrupt
timers
RTC
12-bit DAC
LEGEND
Migration difference from KL05 family
Figure 3. KL15 family block diagram
KL14/KL15 Product Brief, Rev. 2, 6/2012
Freescale Semiconductor, Inc.
Preliminary
General Business Information
5
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
