Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
Features:
•
•
•
•
•
•
Choice of four output options in low-cost side-looking package
Choice of two sensitivity options (OPL560/561/562/563)
High noise immunity
Direct TTL/LSTTL CMOS interface
Data rates to 250 kBaud for all except OPL560 series (200 kBaud)
Low power consumption
Product Photo Here
Description:
All components in this series include a photodiode, amplifier, voltage regulator, Schmitt trigger and NPN output
transistor on a single silicon chip.
OPL560
chips also include a voltage regulator on the chip. All devices in the
series have a Photologic® chip that is encapsulated in a molded plastic side-looking package with an integral lens
(recessed integral lens for OPL535 and OPL536). This packaging provides enhanced optical coupling, combined
with mechanical protection. The hysteresis characteristics of the Schmitt trigger on each device offers high
immunity to noise on input and V
CC
.
OPL530, OPL531, OPL535
and
OPL536
include a 10 K
Ω
pull-up resistor (R
L
) from output to V
CC
. These
components exhibit very stable performance over supply voltages ranging from 4.5 V to 16 V and a wide range of
irradiance levels.
OPL550
and
OPL551
devices feature TTL/LSTTL compatible logic level output which can drive
up to 8 TTL loads without additional circuitry and medium-speed data rates to 250 kBaud, with typical rise and fall
times of 25 nanoseconds.
OPL560, OPL561, OPL562
and
OPL563
devices feature TTL/LSTTL compatible logic
level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.
OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562
and
OPL563
are mechanically and spectrally
matched to OP140 and OP240 LEDs.
OPL535
and
OPL536
are mechanically and spectrally matched to OP145
and OP245 series LEDs.
Applications:
•
•
•
•
•
•
Non-contact reflective
object sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Door sensor
Base Part Number
OPL530
OPL531
OPL535
OPL536
OPL550
OPL551
OPL560
OPL561
OPL562
OPL563
Package
Output Type - with Light
Internal 10K - High
Internal 10K - Low
Internal 10K - High
Internal 10K - Low
Input Power Range
(mW/cm
2
) [Min/Max]
-
A
B
0.08/.40
0.08/.25
Recessed
Lens
Totem Pole - High
Totem Pole - Low
Totem Pole - High
Totem Pole - Low
Totem Pole - High
Totem Pole - Low
OC = Open Collector Output
0.25/2.4
0.25/2.5
0.09/.55
0.25/1.4
0.25/1.5
0.09/.36
0.20/0.40
0.025/.23
0.025/.14
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 09/08
Page 1 of 8
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
OPL530, OPL550, OPL560 Series
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
Pin #
1
2
3
Sensor
Ground
Output
V
CC
OPL535, OPL536 Series
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
Pin #
1
2
3
Sensor
Ground
Output
V
CC
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 09/08
Page 2 of 8
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 (-OC, -OCA, -OCB)
OPL550, OPL550A, OPL551, OPL551A,
OPL560, OPL560A, OPL561, OPL561A, OPL562, OPL562A, OPL563, OPL563A
OPL550/550A/560/560A/562/562A Totem-Pole
V
CC
OPL530/535/550/560/562 (-OC, -OCA, -OCB) Open-Collector
V
CC
OUT
OUT
GND
OPL 551/551A/561/561A/563/563A/ Inverted Totem-Pole
V
CC
GND
OPL 531/536/551/561/563 (-OC, -OCA, -OCB) Inverted Open-Collector
V
CC
OUT
OUT
GND
GND
OPL530, OPL530A, OPL530B, OPL531, OPL531A, OPL531B
OPL535, OPL535A, OPL535B, OPL536, OPL536A, OPL536B
OPL530/530A/530B, OPL535/535A/535B 10K Pull-Up
V
CC
OPL531/531A/531B, OPL536/536A/536B Inverted 10K Pull-Up
V
CC
OUT
OUT
GND
GND
V
CC
V
CC
OUT
OUT
GND
GND
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 09/08
Page 3 of 8
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
Absolute Maximum Ratings
(T
A
=25°C unless otherwise noted)
Input Diode
Supply Voltage (V
CC
)
OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536, OPL536-OC,
OPL550, OPL551
OPL560, OPL561, OPL562, OPL563
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
Sourcing Current
OPL560, OPL561, OPL562, OPL563
Power Dissipation
OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536, OPL536-OC
OPL550, OPL551, OPL560, OPL561, OPL562, OPL563
Sinking Current
OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536, OPL536-OC
OPL550, OPL551
OPL560, OPL561, OPL562, OPL563
Voltage at Output Lead
(4)
OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536, OPL536-OC
OPL550-OC, OPL551-OC
OPL560-OC, OPL561-OC, OPL562-OC, OPL563-OC
Duration of Output Short to V
CC
or Ground
OP550, OP551
Duration of Output Short to V
CC
OPL550-OC, OPL551-OC
OPL560, OPL561, OPL562, OPL563, OPL560-OC, OPL561-OC, OPL562-OC, OPL563-OC
Low Level Output Current
OPL550, OPL551 Series
High Level Output Current
OPL550, OPL551 Series
Irradiance
OPL550, OPL551 Series
OPL560, OPL560-OC, OPL561, OPL561-OC
OPL562, OPL562-OC, OPL563, OPL563-OC
18 V
10 V
18 V
-40° C to + 85° C
-40° C to + 100° C
260°C
10 mA
90 mW
200 mW
(2)
50 mA
-
50 mA
35 V
35 V
35 V
1 second
1 second
1 second
16 mA
1 mA
10 mW/cm
2
9 mW/cm
3 mW/cm
2
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPL530, OPL530-OC,
OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC, a maximum of 20 grams force may be applied to leads
while at soldering temperatures.
(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and
OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and
OPL563 series.
(3) Irradiance measurements are made with
λi
= 935 nm.
(4) This applies to OC versions only. For I
CC
on pull-up versions, add V
CC
/10 KΩ.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 09/08
Page 4 of 8
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
Electrical Characteristics
(T
A
= 25°C unless otherwise noted)
SYMBOL
PARAMETER
Operating Supply Voltage
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC,
OPL560, OPL561 Series
OPL550, OPL551 Series
MIN
4.5
4.5
TYP MAX
-
-
16
5.5
UNITS
V
TEST CONDITIONS
-
-
V
V
CC
Peak-to-Peak V
CC
Ripple Necessary to Cause
False Triggering of Output
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
OPL560, OPL561 Series
OPL550, OPL551 Series
-
-
2
V
f = DC to 50 MHz
-
-
-
-
0.08
0.08
0.12
.25
.25
1.05
1.05
1.50
2
2.7
8
8
-
-
-
-
-
1.3
1.2
2
-
5
15
12
0.40
0.25
0.40
2.4
1.4
1.6
1.5
2.5
2
-
-
V
mA
mA
mA
V
CC
= 5 V DC, f = DC to 50 MHz
E
E
= 0 or 1 mW/cm
2
E
E
= 0 or 3 mW/cm
2
, V
CC
= 5.5 V
E
E
= 0 or 1 mW/cm
2
Supply Current
(4)
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
I
CC
OPL550, OPL551 Series
OPL560, OPL561 Series
Positive-Going Threshold Irradiance
(3)
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
OPL530A, OPL530-OCA, OPL531A, OPL531-OCA
OPL535A, OPL535-OCA, OPL536A, OPL536-OCA
OPL530B, OPL530-OCB, OPL531B, OPL531-OCB
OPL535B, OPL535-OCB, OPL536B, OPL536-OCB
OPL550, OPL550-OC, OPL551, OPL551-OC
OPL550A, OPL550-OCA, OPL551, OPL551-OCA
mW/cm
2
T
A
= 25° C
mW/cm
2
T
A
= 25° C
mW/cm
2
T
A
= 25° C
mW/cm
2
V
CC
= 5 V, T
A
= 25° C
mW/cm
2
V
CC
= 5 V, T
A
= 25° C
E
eT(+)
Hysteresis Ratio
OP530, OP531 Series
OP535, OP536 Series
OPL550, OPL551 Series
OPL560, OPL561 Series
-
-
-
-
%/°C
%/°C
>0°C
<0°C
-
-
-
-
E
eT(+)/
E
eT(-)
1.20 1.55
-
-
-0.6
-1.6
∆E
et
(+)
(∆T)
Temperature Co-efficient
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPL530, OPL530-OC,
OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC, a maximum of 20 grams force may be applied to leads
while at soldering temperatures.
(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and
OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and
OPL563 series.
(3) Irradiance measurements are made with
λi
= 935 nm.
(4) This applies to OC versions only. For I
CC
on pull-up versions, add V
CC
/10 KΩ.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 09/08
Page 5 of 8
京公网安备 11010802033920号
EEWORLD
