Rear Panel Mount with Straight PC Tails
How To Order Filter Series 79 Connectors
Sample Part Number
Series
Contact Type
Insert Arrangement
Shell Material/Finish
EMI Spring
Filter Type
Filter Class
Mating Hardware Options
PC Tail Length
240-790-029
S
- Socket Contacts
(See Table I)
Aluminum Shell
ME
- Electroless Nickel
MT
- Nickel-PTFE
E
- Chem Film
Z2
- Gold
UC
- Zinc Cobalt with Black Chromate
J
- Cadmium with Yellow Chromate
NF
- Cad/O.D. over Electroless Nickel
E
- With EMI Spring
N
- No EMI Spring
C
- C Filter
P
- Pi Filter
X, Y, Z, A, B, C, D, E, F, G, J
(See Table II)
P
- Jackposts
G
- Male Guide Pins
S
- Female Guide Sockets
N
- No Mating Hardware (See Table)
A
- .125" (3.18)
B
- .250" (6.35)
C
- .375" (9.53)
240-790-029
Series 79 Filtered Plug
G
Series 79
Micro-Crimp
PC Tail Contacts
240-790-029
S
H-66 ME
E
P
D
S
A
.183 (4.65)
.025 (0.64)
EMI Gasket
EMI Spring
Socket Contact
Shell
.007 (0.18)
Notes
1. Assembly to be identified with Glenair’s name, part number,
and date code, space permitting
2. Ground spring is not compatible with Zinc Cobalt or Cadmium
platings. Ground spring is only available with Nickel, Teflon
Nickel, Gold, or Chem Film plating on the shell.
3. EMI Filtered plug connector designed to meet requirements
of MIL-STD-2120 and Glenair Series 79 specifications. Unless
otherwise specified herein, refer to Glenair specification 799-
008 for additional performance characteristics.
4. All contacts to have identical filter value. Other filter
arrangements available, contact factory
5. See pages G-32 to G-37 for PCB hole patterns
6. Dielectric Withstanding Voltage: 500 VDC (Filter Class X, Y, Z
are 250 VDC)
7. Insulation Resistance: 5,000 megohms @ 200 VDC
8. Current Carrying Capacity
23 Gage - 5 Amps max. for all layouts
16 Gage - 7.5 Amps max. for combo layouts / 13 Amps max. for
all-power layouts
12 Gage - 13 Amps max. for combo layouts / 23 Amps max. for
all-power layouts
9. Other filter styles (C-L, L-C, Unbalanced Pi, Multi-Stage,
Multi-Value) are available. Please consult factory with your
requirements.
Materials/Finishes:
Insulators - High Grade Rigid Dielectric / N.A.
Contacts - Copper Alloy / 50 microinches Gold over Nickel
Mating Hardware - 300 Series Stainless Steel / Passivated
EMI Gasket - Silver-Filled Fluorosilicone, CHO-SEAL 1287
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
G-8
E-Mail: sales@glenair.com
Rear Panel Mount with Straight PC Tails
Table I: Contact Arrangements
Layout
#23
A-5
B-2P2
B-9
C-13
D-15
D-3P3
D-7P2
E-11P2
E-19
E-7P3
F-15P2
F-23
F-5P5
G-33
H-10P4
H-29P7
H-36P2
H-54P2
H-5P5
H-66
J-17P4
J-25P2
J-33
J-7P7
K-27P4
K-35P2
K-43
K-9P9
L-6P6
L-78
M-102
78
102
23
33
43
9
6
G
Guide Pins
S
Guide
Sockets
66
13
23
33
7
4
2
4
2
N
No Mating
Hardware
P
Jackposts
Table III: Hardware Option
Connector supplied with blind tapped holes. .150" (3.8
mm) minimum depth. Shell size M has #8-32 UNC-2B
thread. Shell sizes H and L have #6-32 UNC-2B thread.
All other sizes have #4-40 UNC-2B thread.
Connector is supplied with non-removable stainless
steel jackposts. Shell size M has 6-32-UNC thread. Shell
sizes H and L have #4-40 UNC-2B thread. All other sizes
have#2-56 UNC-2B thread.
Connector is supplied with stainless steel non-
removable guide pins for blind mate applications.
Mates with type “S” guide sockets on corresponding
plug connector.
Connector is supplied with stainless steel non-
removable bushings for blind mate applications.
Mates with type “G” guide pins on corresponding plug
connector.
33
6
22
34
52
2
5
7
2
4
5
9
19
4
13
23
5
3
2
9
13
15
3
2
2
5
2
Contact
Quantity
#16
#12
Face View
Table II: Capacitor Array Code / Capacitance Range
Class
X*†
Y*
Z*
A
B
C
D
E
F
G
J
Pi - Circuit (pF)
160,000 - 240,000
80,000 - 120,000
60,000 - 90,000
38,000 - 56,000
32,000 - 45,000
18,000 - 33,000
8,000 - 12,000
3,300 - 5,000
800 - 1,300
400 - 600
70-120
C - Circuit (pF)
80,000 - 120,000
40,000 - 60,000
30,000 - 45,000
19,000 - 28,000
16,000 - 22,500
9,000 - 16,500
4,000 - 6,000
1,650 - 2,500
400 - 650
200 - 300
35-60
* Filter Classes X, Y and Z are 250 VDC.
All others are 500 VDC
† Class X filters not available for insert
arrangements with 3 or more rows of contacts
Blind mate
SHELL SIZES A, B, C, D, E, F, G, J, K
± .030 (0.76) Allowable misalignment from centerline
SHELL SIZES H, L
± .040 (1.02) Allowable misalignment from centerline
SHELL SIZE M
± .050 (1.27) Allowable misalignment from centerline
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
G-9
E-Mail: sales@glenair.com
Series 79
Micro-Crimp
240-790-029
Series 79 Filtered Plug
G
Rear Panel Mount with Straight PC Tails
240-790-029S SHELL SIZE A, B, C, D, E, F, J AND K DIMENSIONS
A Max.
B Basic
C Basic
D Max.
.233 (5.92)
Max.
.150 (3.81) Min.
2X
Contact Tail Diameters:
- #23 Contact For All Layouts
.018/.022 (0.46/0.56)
- #16 Contact In Combo Layouts
.038/.042 (0.97/1.07) Reduced Dia
- #16 Contact In All-power Layouts Only
.060/.064 (1.52/1.63) Full Dia
240-790-029
Series 79 Filtered Plug
G
.485 (12.32)
Max.
2-56 UNC-2B
X .150 (3.81) Min
2 Places
Series 79
Micro-Crimp
2-56 UNC-2B
X .150 (3.81) Min
2 Places
.158 (4.01)
.093 ±.005
(2.36 ± 0.13)
E Max.
C Basic
Jackpost Shown
For Reference
See Table III
PC Tail Length
±.020 (0.51)
Code A: .125 (3.18)
Code B: .250 (6.35)
Code C: .375 (9.53)
.335 (8.51)
Max.
.872 (22.15)
Max.
.215 (5.46)
Max.
Shell Sizes A, B, C, D, E, F, J, K
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
1.211
1.361
1.511
1.611
1.761
1.911
2.261
2.661
mm.
30.76
34.57
38.38
40.92
44.73
48.54
57.43
67.59
790-029S Dimensions for Size A-F, J and K
B Basic
C Basic
D Max.
In.
.925
1.075
1.225
1.325
1.475
1.625
1.975
2.375
mm.
23.50
27.31
31.12
33.66
37.47
41.28
50.17
60.33
In.
.565
.715
.865
.965
1.115
1.265
1.615
2.015
mm.
14.35
18.16
21.97
24.51
28.32
32.13
41.02
51.18
In.
.335
.485
.635
.735
.885
1.035
1.390
1.795
mm.
8.51
12.32
16.13
18.67
22.48
26.29
35.31
45.59
E Max.
In.
.760
.910
1.060
1.160
1.310
1.460
1.810
2.210
mm.
19.30
23.11
26.92
29.46
33.27
37.08
45.97
56.13
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
G-10
E-Mail: sales@glenair.com
Rear Panel Mount with Straight PC Tails
240-790-029S SHELL SIZE G DIMENSIONS
1.861 (47.27) Max
1.575 (40.01) Basic
1.215 (30.86) Basic
1.010 (25.65) Max
.150 (3.81) Min.
2X
PC Tail Length
±.020 (0.51)
±.040 (1.02) For Size 12 Combo Layouts
Code A: .125 (3.18)
Code B: .250 (6.35)
Code C: .375 (9.53)
.320 (8.13)
Max.
2-56 UNC-2B
X .150 (3.81) Min
2 Places
.158 (4.01)
Jackpost Shown
For Reference
See Table III
.335 (8.51)
Max.
.093±.005
(2.36 ± 0.13)
.872 (22.15)
Max.
Contact Tail Diameters:
- #23 Contact For All Layouts
.018/.022 (0.46/0.56)
- #16 Contact In Combo Layouts
.038/.042 (0.97/1.07) Reduced Dia
- #16 Contact In All-power Layouts Only
.060/.064 (1.52/1.63) Full Dia
- #12 Contacts In Combo Layouts
.060/.064 (1.52/1.63) Reduced Dia
- #12 Contact In All-power Layouts Only
.092/.096 (2.34/2.44) Full Dia
1.410 (35.81)
Max.
1.215 (30.86) Basic
.575 (14.61)
Max.
.215 (5.46)
Max.
2-56 UNC-2B
X .150 (3.81) Min
2 Places
Shell Size G
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
G-11
E-Mail: sales@glenair.com
Series 79
Micro-Crimp
240-790-029
Series 79 Filtered Plug
G
Rear Panel Mount with Straight PC Tails
240-790-029S SHELL SIZE H AND L DIMENSIONS
F Max.
G Basic
H Basic
J Max.
.150 (3.81) Min.
2X
PC Tail Length
±.020 (0.51)
±.040 (1.02) For Size 12 Combo Layouts
Code A: .125 (3.18)
Code B: .250 (6.35)
Code C: .375 (9.53)
240-790-029
Series 79 Filtered Plug
G
Series 79
Micro-Crimp
.158 (4.01)
4-40 UNC-2B
X .150 (3.81) Min
2 Places
.093 ±.005
(2.36 ± 0.13)
K Max.
H Basic
.600 (15.24)
Max.
4-40 UNC-2B
X .150 (3.81) Min
2 Places
.349 (8.86)
Max.
Jackpost Shown
For Reference
See Table III
Contact Tail Diameters:
- #23 Contact For All Layouts
.018/.022 (0.46/0.56)
- #16 Contact In Combo Layouts
.038/.042 (0.97/1.07) Reduced Dia
- #16 Contact In All-power Layouts Only
.060/.064 (1.52/1.63) Full Dia
- #12 Contacts In Combo Layouts
.060/.064 (1.52/1.63) Reduced Dia
- #12 Contact In All-power Layouts Only
.092/.096 (2.34/2.44) Full Dia
.335 (8.51)
Max.
.872 (22.15)
Max.
.265 (6.73)
Max.
Shell Size H & L
Shell
Size
H
L
790-029S Size H & L Dimensions
F Max.
G Basic
H Basic
J Max.
In. mm. In. mm. In. mm. In. mm.
K Max.
In. mm.
2.500 63.50 2.236 56.79 1.800 45.72 1.385 35.18 2.045 51.94
2.736 69.49 2.472 62.79 2.036 51.71 1.623 41.22 2.281 57.94
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
G-12
E-Mail: sales@glenair.com
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
