Parallel - Fundamental Quartz Crystal, 30MHz Nom, SMD, 4 PIN
ABM8-30.000MHZ-18-BH-T3 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206926699
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.33
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0035%
frequency tolerance
50 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
30 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
-20 °C
physical size
3.2mm X 2.5mm X 0.8mm
Series resistance
40 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM8-30.000MHZ-18-BH-T3 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
TI's MSP430 supports online upgrades by loading the Bootloader in the main program. Through the online upgrade function, customers can update the internal program of the MSP430 at any time through an ...
[i=s]This post was last edited by Unseen on 2022-9-4 23:17[/i]I have been waiting for a long time and have always wanted to make a T12 white light soldering iron, but I have never taken action until Q...
[i=s]This post was last edited by Jacktang on 2019-8-10 17:04[/i]Many products are now “at your fingertips” through the Internet of Things (IoT) environment, including test equipment such as digital m...
1. Serial port data transparent transmission (already realized)2. Key pairing by pressing keys3. Low power consumption, interrupted by pressing keys (required to be around 20uA)Development cost 5000-1...
Live Topic
TI takes you to experience the interconnected and efficient smart home solutionlive time
14 June 2022 (Tuesday) 14:00-15:00
Live AgendaApplication of wireless MCU products in the smart home...
This issue recommends e-books from ADI Think TankPractical Handbook of RF and Microwave TechnologyAnalog Devices has been deeply involved in the RF and microwave fields for many years and has the indu...
How to choose explosion-proof motor
1. After the voltage, frequency and speed are determined, the motor power is determined by selecting the installation factor K according to the load driven ...[Details]
51 MCU driving 74hc595 circuit diagram: The following is the program for the 51 microcontroller to drive the 74hc595 chip: #include //Contains the header file of 51 MCU #include #define uint unsign...[Details]
An oscilloscope is an electronic measuring instrument with a wide range of uses. It can transform invisible electrical signals into visible images, making it easier for people to study the changing ...[Details]
When the touch screen is detected to be pressed, it enters the automatic measurement mode and starts the ADC. In the ADC interrupt, it determines whether the touch screen is pressed. Only when it is ...[Details]
The VD1-VD4, R1, C1, and C2 of the switching power supply part form a rectifier filter circuit. NE555 and R2, R3, C4, VD6 and other components form a multi-vibrator circuit with a frequency of about 2...[Details]
The Swiss Federal Institute of Technology has developed a new companion for people with visual impairments - a robot guide dog. Researchers said that the robot dog can help blind people navigate in...[Details]
In the last class, we already know that the symbols R7 and R6 in the program represent RAM units, which are used to store some data. Now let’s take a look at the meaning of other symbols. ...[Details]
1.
Characteristics of
distributed
fiber optic sensing
technology
Distributed fiber optic sensing technology has the ability to simultaneously obtain
the
measured
dis...[Details]
ANCA's new media matrix has added a new member, "ANCA Machine Tools" has officially settled in Bilibili and become a new UP host. We look forward to the continued attention and support from colleague...[Details]
With the rapid development of electronic technology, modern electronic equipment has been widely used in various fields of human life. At present, electronic equipment has been in a period of rapid...[Details]
Akoustis said today that it has received two development orders from customers for its new XBAW duplexer for Wi-Fi 7.
The two new Wi-Fi 7 duplexers are expected to enter pre-production i...[Details]
1. The performance indicators of the instrument must meet the requirements of the national metrological verification regulations. The instruments in use should be calibrated periodically. If necessa...[Details]
3.1 Instruction System Overview
3.1.1 Instructions and instruction system
The instruction set of each machine is inherent and cannot be changed.
3.1.2 Programs and Programming
I...[Details]
The era of all-solid-state batteries is coming at a faster speed: in the past, the market generally expected that commercial mass production of all-solid-state batteries would not be achieved until 2...[Details]
Recently, passengers waiting for buses at the Zhengqi Garden North Gate bus stop in Lingang District were attracted by the high-tech bus stop. The streamlined appearance, photovoltaic panels that can ...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
