HVPS
www.vishay.com
Vishay Dale Thin Film
High Value Precision SIP Thin Film Resistor,
Through Hole Network
FEATURES
• High nominal precision resistors
(value range 50K to 10M)
• Highly accurate resistance tolerance
(up to ± 0.01 %)
• Conformal coating flame resistant (UL 94 V-0)
rating
• Ultra low TCR (± 5 ppm/°C)
• High voltage
• Flame resistant (UL 94 V-0 rating)
• High voltage rating to 300 V
• Compliant to RoHS Directive 2002/95/EC
SCHEMATIC
• Halogen-free according to IEC 61249-2-21 definition
Note
*
Pb containing terminations are not RoHS compliant, exemptions
may apply
APPLICATIONS
1
2
• Precise instrumentation (medical, test etc.)
• Precision amplifiers
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
2
50 000
to 5000 k (HVPS1)
100 000
to 10 000 k (HVPS2)
5 ppm/°C to 25 ppm/°C
-
± 0.01 % to ± 1.0 %
-
125 mW (HVPS1)
250 mW (HVPS2)
-
R
± 0.05 %
-
< 1.0 ppm/V
250 V (HVPS1)
300 V (HVPS2)
- 55 °C to + 125 °C
-
< - 30 dB
< 0.1 μV/°C
R
± 0.01 %
-
CONDITIONS
-
-
-
- 55 °C to + 125 °C
-
Maximum at + 70 °C
-
-
-
2000 h at + 70 °C
-
-
-
-
-
-
-
1 year at + 25 °C
-
Document Number: 60091
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
HVPS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING
in inches (millimeters)
HVPS1
0.240 max.
(6.096)
PART NO:
HVPS2
0.110 max.
(2.794)
0.320 max.
(8.128)
PART NO:
0.110 max.
(2.794)
DATECODE
0.260 max.
(6.604)
DATECODE
0.260 max.
(6.604)
0.010 (0.25)
0.125 min.
(3.175)
0.02 ± 0.005
(0.508 ± 0.127)
0.100 typ.
(2.54)
0.02 ± 0.005
(0.508 ± 0.127)
0.200 typ.
(5.08)
0.125 min.
(3.175)
0.010 (0.25)
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Tin/Lead Option
Lead (Pb)-free Option
Tin/Lead and Lead (Pb)-free Finish
Passivated nichrome
Alumina
Epoxy coated
Copper alloy
Sn60 - Sn63
Sn96.5, Ag3.0, Cu0.5
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HVPS1E1003QBX
H
H
V
V
P
P
S
S
TCR
1
2
S
E
Y
1
2
0
0
0
0
3
3
Q
T
B
B
X
X
PACKAGING
GLOBAL MODEL
(3 or 4 digits)
HVPS1
HVPS2
(Tin lead)
HVPS1S
HVPS2S
(Lead (Pb)-free)
(e1)
RESISTANCE
First 3 digits are
significant figures.
Last digit specifies
the
number
of
zeroes to follow.
e.g.: 1001 = 1K
1002 = 10K
1005 = 10M
TOLERANCE
A
= 0.05 %
B
= 0.1 %
D
= 0.5 %
F
= 1.0 %
Q
= 0.02 %
T
= 0.01 %
E
= 25 ppm/°C
D
= 15 ppm/°C
Y
= 10 ppm/°C
Z
= 5 ppm/°C
BX
=
Conductive foam box
Historical Part Number example: HVPS1E5004B (for reference purposes only)
HVPS1
SERIES
E
TCR CHARACTERISTICS
5004
RESISTANCE
B
TOLERANCE
Revision: 20-Oct-11
Document Number: 60091
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
